COVID-19 UPDATE:
Click here for the latest information on how the current lockdown in New Zealand for COVID-19 is affecting Shockcraft and our services.
 

All Products #1

Set Descending Direction

1-25 of 1188

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. For 8 to 25 mm ID cartridge bearings. Learn More
  2. Fork drop-out adaptor ID: 10 mm, OD: 25 mm, Th: 6.09 mm, OD: 12.2 mm New Old Stock (NOS) Specialized Part Code: W205-0017 Learn More
  3. Stanchion End Cap 068161
    For 30 mm Black, R7, M30 etc
    Black plastic  29.7 mm OD, 20 mm tall
    1.125" 18 TPI upper thread
    22 mm lower external hex
    Manitou Part Code: 068161

    Learn More
  4. High quality aluminium headset with cartridge bearings for standard 1 1/8" (1.125 inch) frames and forks Learn More
  5. 1 1/8" x 1.339 x 0.107 AN Wiper
    Fits vintage Manitou 1-4 & EFC forks. Learn More
  6. Stainless Steel
    Application: Niner Suspension Pivots & Trek Speed Concept Lower Headsets ID: 27.1 mm, OD: 38 mm, W: 6.5 mm Learn More
  7. Application: Niner Suspension Pivots & Trek Speed Concept Lower Headsets ID: 27.1 mm, OD: 38 mm, W: 6.5 mm Learn More
  8. Replacement top cap, conical wedge and shim for 1.125'' headsets Fits bearings with 45 degree inside chamfer Learn More
  9. Crown race for 1.5" and tapered forks Learn More
  10. Fits 1.125" steerer.  Adapts to 1.5" headset.
    Fits 3645 bearings with 36° inner chamfer

    FSA Part Code: 160-5540 Learn More
  11. Fits 1.125" steerer.  Adapts to 1.5" headset.
    Fits 3645 bearings with 36° inner chamfer

    FSA Part Code: 160-5538 Learn More
  12. 1.6 mm (1/16") Stainless Steel Ball Bearing
    Sold individually
    Application: various, including adjuster knob clickers on some forks & shocks

    Learn More
  13. Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

    We can fit this into your shock and offer a full shock hardware manufacturing/fitting service.

    Learn More
  14. Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

    Learn More
  15. Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for new fitment or repair
    Straight replacement for similar bushings from Fox, Trelleborg etc

    Note these have a tighter ID than Fox & IGUS
    They can be reamed to size after installation if they are too tight

    Learn More
  16. 1/2" Low Friction Flanged Bushing Pair (Fox)

    NZ$19.95

    Available on backorder

    Fox Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for repair
    Straight replacement for genuine Fox flanged bushings provided the pin isn't worn

    If you have a worn pin causing a knock, then use the green versions which have a tighter ID

    Learn More
  17. Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
    1/2" ID x 1/2" Wide.  
    Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

    Learn More
  18. 6.35 mm (1/4") Loose Ball Bearings
    Sold in packs of 20 & 100
    Application: most Shimano rear hubs

    Learn More
  19. 10 ml Oil Syringe - for fork filling & brake bleeding Learn More
  20. Harder wearing upgrade for
    older RockShox
    Rear Shock Eyelets
    10 mm x 12 mm x 12 mm
    Available with shock eyelet pressing Learn More
  21. Heavy duty tool for installing and removing all eight-notch bottom bracket cups, including Monocrome SF41 & SF46, Shimano, ISIS Drive, ISIS Overdrive
    Also fits Shimano crankset lockrings
    Fits a 32 mm hex socket so a torque wrench can be used

    Learn More
  22. 12 mm Crush Washer
    16mm OD, 2.3mm thick.
    Fits Fox, Rockshox & other forks.

    Sold indvidually. Learn More
  23. Straight replacement for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More
  24. Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More
  25. ID: 12 mm, OD: 14 mm, W: 12.5 mm Manitou Part Code: 85-6105 Learn More

Set Descending Direction

1-25 of 1188

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5