2.8 mm Stainless Steel Ball Bearing
Sold individually
Application: various, including adjuster knob clickers on some forks & shocks

Learn More

Replacement bolt and fitting kit for all Manitou 20 mm hex axle forks Manitou Part Code: 141-23996 Learn More

We have 1x "2nd hand used" axel remaining, please contact us for further information.

20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070

Learn More

20 mm Hex-lock through axle for 2006+ Manitou Travis
Also fits 2008+ Minute/Drake/Circus 2009+ Dorado
Interchangable with 141-23995
Hex measures 21.7 mm A/F non-disc side and 18.3 mm A/F disc side
Cap thread M11 x 1.25mm
Black Colour

Manitou Part Code: 83-2966

Learn More

2005 Nixon SPV Damper Volume Adjuster
Tooled type which needs thin 16mm socket to adjust
1.125 x 18 TPI imperial thread
Also fits 2006 Minute and 2005 Sherman with SPV.

Manitou Part Code: 83-2444

Learn More

2006 Minute SPV Damper Volume Adjuster (2007)
No Tools type with 4 settings
1.125 x 18 TPI imperial thread
Also fits 2005 Nixon and Sherman with SPV.

Manitou Part Code: 83-2840

Learn More

20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009-2019
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Cap thread M14 x 1.0mm
Silver Colour with Black cap.

Manitou Part Code: 141-23995

Learn More

Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm width to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More

Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou SX & Mars forks
Fits forks 2000-2003.

Shockcraft Part Code: KSMAN286A Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More

28.6 x 3.0 mm headset spacer.
35mm OD.
Black anodised aluminium

Shockcraft Part Code:  SPA-28630 Learn More

28.6 x 5.0 mm headset spacer.
35mm OD.
Black anodised aluminium

Shockcraft Part Code:  SPA-28650 Learn More

3 ml Oil Syringe - for fork filling & brake bleeding Learn More

Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks

Learn More

3.175 mm (1/8") Loose Ball Bearing
Sold individually
Application: Pedals Learn More

3.175 mm (1/8") Stainless Steel Ball Bearing
Sold individually
Application: various, including adjuster knob clickers on some forks & shocks

Learn More

3.97 mm (5/32") Loose Ball Bearing
High quality chromium steel balls from SKF
Sold individually
Application: Shimano disc hubs Learn More

Application: Main shaft bushing for Fox rear shocks with 3/8" damper shafts
ID: 3/8", OD: 15/32", W: 1/4" Learn More

30 ml Oil Syringe - for fork filling & brake bleeding Learn More

Shockcraft's internal seal kit for 30 mm Manitou Black & Minute forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Xvert forks
Fits 2000-2001 Xvert forks

Shockcraft Part Code:  KSMAN30AX Learn More

Bushing set for replacement/repair of 30 mm Manitou forks
Fits Black, Minute (2004-05), R7, M30 & Markhor forks
Requires specialist tools to install and size
Manitou Part Code: 85-5321

Learn More

Shockcraft's internal seal kit for 30 mm Manitou Splice forks Learn More

Application: BB30, BBright & SI Bottom Brackets Learn More