Spare Parts

Set Descending Direction

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
  1. Application: BB30, BBright & SI Bottom Brackets Learn More
    • Out of stock

  2. 2.5 mm spacer for 41 mm press-fit (and Screw-Fit 41) bottom brackets (BB92 & SRAM)
    This spacer is required for any frames with an 89.5 mm wide BB shell, unless using a 2.5 mm wide chain guide or BB mount derailleur

    ID: 41.3 mm, OD: 44.3 mm, W: 2.5 mm

    Learn More
  3. Application: Klein Bottom Bracket ID: 17 mm, OD: 35 mm, W: 10 mm Learn More
  4. Application: BMX Mid Bottom Brackets to fit 20 mm (Metric) Axle ID: 20 mm, OD: 42 mm, W: 12 mm Learn More
  5. Application: Wheel Hubs & Bottom Brackets (BB30, BBright & SI) ID: 30 mm, OD: 42 mm, W: 7 mm Learn More
    • Out of stock

  6. Application: Monocrome, Raceface X-Type & FSA MegaExo Bottom Brackets ID: 25 mm, OD: 37 mm, W: 7 mm Available with Bearing Press Service & CNC Storm Drains Learn More
  7. Application: Monocrome, Raceface X-Type & FSA MegaExo Bottom Brackets ID: 25 mm, OD: 37 mm, W: 7 mm Stainless steel balls and races Available with Bearing Press Service & CNC Storm Drains Learn More
  8. Application: Monocrome, Raceface X-Type & FSA MegaExo Bottom Brackets ID: 25 mm, OD: 37 mm, W: 7 mm Available with Bearing Press Service & CNC Storm Drains Learn More
  9. Application: Wheel Hubs & Bottom Brackets (Raceface X-Type & FSA MegaExo) ID: 25 mm, OD: 37 mm, W: 7 mm Learn More
  10. 6805-2RS FC Suspension Bearing (Enduro MAX)

    $21.50

    Available on backorder

    Application: Commencal, Cove & Trek Suspension Pivots ID: 25 mm, OD: 37 mm, W: 7 mm Learn More
  11. Application: Wheel Hubs & Bottom Brackets (Raceface X-Type & FSA MegaExo) ID: 25 mm, OD: 37 mm, W: 7 mm Stainless steel balls and races Learn More
  12. Application: Wheel Hubs & Bottom Brackets (Raceface X-Type & FSA MegaExo) ID: 25 mm, OD: 37 mm, W: 7 mm Learn More
  13. Application: Campagnolo Ultra-Torque & most Shimano HT2 Bottom Brackets ID: 25 mm, OD: 37 mm, W: 6 mm (Narrow version of 6805 Caged Bearing) Learn More
  14. Application: Campagnolo Ultra-Torque, some FSA MegaExo Road BB's, Shimano HT2 Bottom Brackets for Mountain and Road (including internal BB91-41, internal BB91-42, external HT2 and road HT2) ID: 25 mm, OD: 37 mm, W: 6 mm Bearing materials: stainless steel cage and ceramic balls Lubricant, factory fill with Shockcraft Lightning Grease. (Narrow version of 6805 Caged Bearing) Learn More
  15. Application: Campagnolo Ultra-Torque, some FSA MegaExo Road BB's, Shimano HT2 Bottom Brackets for Mountain and Road (including internal BB91-41, internal BB91-42, external HT2 and road HT2) ID: 25 mm, OD: 37 mm, W: 6 mm Bearing material: chromium steel with a nylon retainer Lubricant, factory fill to 50% with Shockcraft Lightning Grease (Narrow version of 6805 Caged Bearing) Learn More
  16. Application: Wheel Hubs & Bottom Brackets (BB30, BBright & SI) ID: 30 mm, OD: 42 mm, W: 7 mm Learn More
  17. Application: Wheel Hubs & Bottom Brackets (BB30, BBright & SI) ID: 30 mm, OD: 42 mm, W: 7 mm Learn More
  18. Application: Look Monobloc frames and cranksets ID: 50 mm, OD: 65 mm, W: 7 mm Stainless steel balls and races Learn More
  19. Replacement "Top Hat" bearing cover pair for your Monocrome External Bottom Bracket.
    These can also be used to fit 6805 bearings into Trek BB90 and BB95 internal bottom brackets.
    This allows greater bearing choice.
    Fits BSA external MCEBB001, MCEBB101 and MCEBB201.
    Fits Screw-Fit 41mm also.

    This version is standard fit and may be loose or knock on worn crank spindles.  It fits best with new cranks.
    Tight version available here: https://www.shockcraft.co.nz/bb-6805-bearing-caps-tight-pair-monocrome.html

    Learn More
  20. Replacement "Top Hat" bearing cover pair for your Monocrome External Bottom Bracket.
    These can also be used to fit 6805 bearings into Trek BB90 and BB95 internal bottom brackets.
    This allows greater bearing choice.
    Fits BSA external MCEBB001, MCEBB101 and MCEBB201.
    Fits Screw-Fit 41mm also.

    This version is tighter fit to remove any play or knock on worn crank spindles.  It will be tight to install with new cranks.
    Std version available here:  https://www.shockcraft.co.nz/bb-6805-bearing-caps-std-pair-monocrome.html

    Learn More
  21. Application: BB30, PressFit 30, BBright & SI Bottom Brackets ID: 30 mm, OD: 42 mm, W: 7 mm Learn More
  22. Application: BB30, BBright & SI Bottom Brackets Learn More
  23. Application: BB30, BBright & SI Bottom Brackets ID: 30 mm, OD: 42 mm, W: 7 mm Stainless steel balls and races Learn More
  24. Application: BB30, BBright & SI Bottom Brackets ID: 30 mm, OD: 42 mm, W: 7 mm Chromium steel ABEC 3 Learn More
  25. Application: Trek BB90 & BB95 Internal Bottom Brackets with Truvativ/SRAM GXP Cranks
    Spacer only
    Complete BB90 (road) & BB95 (mountain) internal bottom bracket kit to fit Truvativ GXP/SRAM cranks available here

    Learn More

Set Descending Direction

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3