Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

Learn More

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Learn More

X-Fusion Flanged bushings for shock eyelets
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair

If you have a worn pin causing a knock, then use the green versions which have a tighter ID

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
1/2" ID x 1/2" Wide.  
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

Learn More

12 mm Crush Washer
16mm OD, 2.3mm thick.
Fits Fox forks.

Sold indvidually. Learn More

Lower leg bushings for Fox 32 mm forks Fox Part Code: 803-00-102 We can fit these for you (details on our fork service page)

Learn More

34 mm Foam Ring Pair
6.5mm tall.
Fits 34mm forks from Manitou & Fox

Shockcraft Part Code:  S-FOAMRING-34PAIR Learn More

Lower leg bushings for Fox 34 mm forks
We can fit these for you (details on our fork service page)

Fox Part Code: 803-00-277 Learn More

Pair of foam rings to fit 35 and 36 mm stanchioned forks Learn More

Lower leg bushings for Fox 36 mm forks Fox Part Code: 803-00-135 We can fit these for you (details on our fork service page)

Learn More

Lower leg bushings for Fox 38 mm forks
We can fit these for you (details on our fork service page)

Fox Part Code: 803-01-596 Learn More

Pair of foam rings to fit 40 mm stanchioned forks Learn More

Lower leg bushings for Fox 40 mm forks
We can fit these for you (details on our fork service page)

Fox Part Code: 803-00-136 Learn More

Steel caged bearing.
These bearings also fit remote top cap for some Fox 34 Step-Cast forks (2022).

ID: 21 mm, OD: 15 mm, W: 4 mm

Learn More

Air can for Fox 6.5x1.5" FLOAT/DPS rear shock.
EVOL type with higher internal notch position.  87mm length (ignoring seal).
Requires matching EVOL seal-head (short = 812-06-087-KIT) for retrofit to 2014-2018 FLOAT shocks.

Fox Part Code: 806-29-628-KIT Learn More

Fox Float Fluid 5cc "Pillow Pack"
Equivalent replacement from RWC here
At Shockcraft we use Slickoleum instead of oil in air can service of Fox Float air shocks Learn More

We recommend Slickoleum as an altertive product.

Shockcraft equivalent to RWC Air Chamber Lube is OEM Fox Float Fluid

At Shockcraft we use Slickoleum instead of oil in air can service of Fox Float air shocks Learn More

Fox 34 Float NA2 2016-2021 air shaft assemblies
Use for repair or travel change
Fit F34 Float 2016-2021 forks with NA2 air system and 1.214" (30.8 mm) stanchion ID

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

All air shafts are new unless marked second hand.
We have a limited supply of second hand air shafts.  These have been removed from customers' bikes during service, for travel change (see grading info).  We offer a trade-in scheme for those wanting a travel change during service.  Contact us for details. Learn More

Fox 36 Float NA2 2018-2021+ air shaft assemblies
Use for repair or travel change
Fit F36 Float 2018-2021+ forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")
The 2021+ shafts are longer (bigger negative chamber) than the 2018-20 air shafts

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 36 Rhythm 2019+ and Marzocchi Z1 NA2 air shaft assemblies
Use for repair or travel change
Fit F36 Rhythm 2019 & later forks with NA2 air system and 1.275" (32.4 mm) stanchion ID
These shafts have a smaller diameter piston and a different base-plate to the Fox 36 NA2 2018-20 air shaft assemblies

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 38 Float NA2 2021+ air shaft assemblies
Use for repair or travel change
Fit F38 Float 2021+ forks with NA2 air system and 1.214" stanchion ID

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 34 Rhythm 2017+ & Marzocchi Z2 air shaft assembly
140 mm travel

Fox Part Code:  820-02-370-KIT Learn More

Fox 34 Rhythm 2017+ & Marzocchi Z2 air shaft assembly
150 mm travel

Fox Part Code:  820-02-369-KIT Learn More

Fits Fox Float X rear shocks 2022
Genuine Fox kit.

Fox Part Number 803-01-727 Learn More