We Are Open.
Detail on our current operation during NZ's Covid-19 lockdown is available
here.
 

Dropper Posts

Set Descending Direction

1-25 of 28

Page:
  1. 1
  2. 2
  1. 25 x 28 mm Piston Band (IGUS)

    US$14.85

    In stock

    Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More
  2. Clamp block for servicing RockShox Reverb dropper Posts
    Designed and manufactured by Shockcraft
    CNC machined from aluminium for a solid clamp with no scratching
    4 clamp sizes - 7 to 31.6 mm

    Shockcraft Part Code:  SC-CLAMP-RS-REVERB-V1 Learn More
  3. DROPT Dropper Remote (Cane Creek)

    US$126.22

    No Longer Available

    Cane Creek Part Code: BAE0050 Learn More
    • Out of stock

  4. Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More
  5. Fits Reverb and X-Lock hoses at lever end.

    SRAM Part Code: 11.6815.022.030 Learn More
  6. Remote service kit for Reverb 1X Remote & Reverb AXS (2020+)
    Includes boot, paddle & barb

    SRAM Part Code: 11.6818.048.000 Learn More
  7. Fits RockShox Reverb & Reverb Stealth B1 seatposts
    Includes replacement seal-head, foam ring, inner sealhead bushing, retainer clip & o-rings

    SRAM Part Code: 11.6818.031.000 Learn More
  8. RockShox Reverb 2010-12 Full Servce Kit (SRAM)

    US$105.58

    Available on backorder

    Fits RockShox Reverb A1 seat posts (not Reverb Stealth)
    SRAM Part Code: 11.6818.003.010 Learn More
  9. Application: RockShox Reverb A1, A2 and B1 Stealth & Non-Stealth
    This comprehensive seal kit includes all o-rings that need replaced during a service

    PDF showing contents of internal seal kit is available here

    Learn More
  10. Fits Reverb A2 dropper posts
    Non stealth models with external hose.
    Includes new seal heads, bushings, internal seals and  upgraded IFP

    SRAM Part Code: 11.6818.031.005

    Learn More
  11. Rockshox Reverb & Stealth lower bushing.
    Single bushing with o-ring to fit Reverb Reverb Stealth dropper posts
    Installs into cartridge end-cap for service or repair.

    SRAM Part Code: 11.6818.035.007 Learn More
  12. Rockshox Reverb & Stealth cartridge end-cap.
    Coarse thread version for A1 and A2 models.
    Fits RockShox Reverb & Reverb Stealth up to 2016 (A1 & A2)
    Includes inner and outer seals with lower bushing.

    SRAM Part Code: 11.6818.017.020 Learn More
  13. Connectamajig collar
    Fits remotes for Reverb & Reverb Stealth dropper posts
    SRAM Part Code: 11.4318.005.000 Learn More
  14. Kit with internal seals, oil, grease, tools & lower bushing to service RockShox Reverb and Reverb Stealth seat posts

    Comprehensive internal seal kit includes all o-rings that need replaced during a service
    PDF showing contents of internal seal kit is available here
    Alternative to obsolete SRAM kit 11.6815.031.000
    A1 Reverb uses 9.1 x 3.5 mm o-ring for main shaft seal
    A2 & B1 replace 10x15 x4 mm cup seal on main shaft with 10 x 3 mm o-ring (included in kit) to reduce air intrusion

    Lower bushing is either genuine RockShox glacier type or IGUS, which needs trimmed to fit

    Click on related products below for detail on tools

    Learn More
  15. Fits RockShox Reverb Stealth seat posts
    Includes hose with crimped on Connectamajig fitting and barb fitting for the lever end
    Hose length 2000 mm

    For non Connectamajig posts use 11.6815.025.030

    SRAM Part Code: 11.6815.025.030 Learn More
  16. Fits all Reverb & Reverb Stealth dropper posts
    SRAM Part Code: 11.6815.022.010 Learn More
  17. RockShox Reverb Hose Kit (SRAM)

    US$45.75

    Last One Left

    Rockshox Reverb Hose Kit.
    Fits all RockShox Reverb & Reverb Stealth dropper posts
    Includes new hose, strain relief & barb end fittings
    Hose length 2000 mm

    For Connectamajig use 11.6815.025.030

    SRAM Part Code: 11.6815.025.010 Learn More
  18. SRAM Part Code: 00.6815.066.040 Learn More
  19. Replacement IFP for Rockshox Reverb dropper posts.
    Backwards compatible to all Reverb models, A1, A2, B1 and C1/AXS

    SRAM Part Code:  11.6818.053.001 Learn More
  20. Rockshox Reverb & Reverb Stealth hydraulic hose and lever.
    Includes push button remote & spare hose barb fittings.

    Hose end not compatible with Connectamajig.

    SRAM Part Code: 11.6815.026.050 Learn More
  21. Bleed fitting for Rockshox Reverb Seat Posts.
    Fits Stealth and Non-Stealth (external hose) versions
    Used for bleeding & setting oil depth for the internal hydraulics.

    SRAM Part Code: 00.6815.066.020

    Learn More
  22. Fits Reverb Stealth A2 dropper posts
    Includes new seal heads, bushings, internal seals and  upgraded IFP
    Replaces SRAM-11.6818.022.020

    SRAM Part Code: 11.6818.031.004 Learn More
  23. RockShox Reverb Stealth B1 400 Hour 2 Year Service Kit (SRAM)
    Includes bearing/seal heads for post and cartridge along with internal seals.

    SRAM Part Code:  11.6818.031.001 Learn More
  24. RockShox Reverb Top Cap Dust Wiper Kit (SRAM)

    US$42.71

    Available on backorder

    Rockshox Reverb & Stealth top-cap
    Fitted with shaft bushing, foam ring and dust wiper.
    Fits all RockShox Reverb & Reverb Stealth dropper posts

    SRAM Part Code: 11.6818.035.010 Learn More
  25. RockShox Reverb Vent Valve Tool (SRAM)
    Fits C1 and later Reverb dropper posts.

    SRAM Part Code:  00.6818.044.000 Learn More

Set Descending Direction

1-25 of 28

Page:
  1. 1
  2. 2