We are OPEN
Click here for updates on our current status.
 

RockShox

Parts, service and tuning for RockShox suspension and dropper posts.

Set Descending Direction

101-125 of 216

  1. These are only available for Pike, other applications have been superseded by the Debonair C1 (V3).

    Superseded by SRAM-LYRIKPIKEDEBONAIR-AIRSHAFTUPV3

    Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
    Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
    This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

    These are available for self-install or can be installed as part of a Shockcraft service. Learn More
  2. RockShox DebonAir V3 Seal Head Upgrade Kit (SRAM)

    Contains a new seal-head and shaft foot to upgrade Debonair V2 (MY2019 or 2020)  to Debonair V3 (MY 2021)
    This kit only works on Debonair 2 shafts, identified by a moulded plastic black or grey air piston (visible down the top of the stanchion).
    It is not compatible with earlier Solo Air shafts or Debonair v1 (wich had a silver bolt visible in the top of the air piston).

    Fits Pike, Revelation, Lyrik and Yari with Debonair V2 air shafts.

    SRAM Part Code:  00.4020.573.000 Learn More
  3. Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
    It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

    These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

    All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

    V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    Learn More
  4. Air seal kit for RockShox Deluxe & Super Deluxe rear shocks from 2016 onwards
    Includes o-rings, quad rings, wiper seal and grease for air can service
    Excludes backup rings
    Backup rings only need replaced if dirty or excessively worn
    Air can service kit including backup rings is available here
    We recommend using Slickoleum grease in place of air chamber lube as the air chamber lube tends to migrate away from where it is needed

    We've made this kit easy to install by shipping with a full build sheet
    The build sheet is printed to scale and shows the contents of the kit and locations for seal install
    Seals can be laid out on top of the drawing to check confirm size and location

    PDF Build Sheet showing contents of kit is available here Learn More
  5. Individual volume spacer to fit RockShox Deluxe & Super Deluxe rear shocks from 2017
    Sold individually

    SRAM Part Code: 11.4118.042.001 (for kit of 3)

    Learn More
  6. RockShox Deluxe 200 Hour 1 year service kit
    Fits all RS Deluxe A1-B2 shocks.
    Also fits Scott NUDE Deluxe/Deluxe REM A1-B2 (2017-2020) / Deluxe B1+ (2019+)
    Full service kit including remote return spring.

    SRAM Part Code: 00.4318.037.001 Learn More
  7. 50 Hour service kit for RockShox Deluxe and Super Deluxe A1-B2 2017-22 shocks including Trek Reaktiv Thrushaft.
    Contains air can seals, air can wiper seals, assembly grease and oil sachet
    SRAM Part Code: 00.4315.032.615

    Learn More
  8. Bearings and spacers to fit bearing eyelets of RockShox Deluxe & Super Deluxe 2017+ rear shocks

    SRAM Part Code: 11.4118.046.000 Learn More
  9. RockShox Flanged Dust Seal 32mm X 5 mm Kit (SRAM)

    US$20.20

    Backorder ex-NZ Supplier

    RockShox 32 x 42 mm Black Wiper Seal. Includes two flanged dust wipers & 5 mm foam rings. Learn More
  10. RockShox fork damper seal head assembly
    Fits Moco 32MM - SID A 2009-14, SID B 2011-13, Reba A1-A6, Revelation 2009-13, Bluto RL A1-A5 Learn More
  11. RockShox Gnar Dog 2.5T volume tokens for maximum volume reduction in Deluxe & Super Deluxe shocks
    Volume is equal to 2.5x the normal Deluxe volume reducers here
    Sold & fitted individually

    SRAM Part Code: 11.4118.051.002 Learn More
  12. Fits Reverb and X-Lock hoses at lever end.

    SRAM Part Code: 11.6815.022.030 Learn More
  13. RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 Damper RC2 (SRAM)

    US$421.74

    Available Ex NZ Supplier 2 Days

    Self contained Lyrik/Yari Charger 2.1 RC2 damper for repair or upgrade of RockShox Lyrik B1+ & Yari A1+ 2016+ forks
    Fits 35 mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis
    Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
    580 mm overall length
    For up to 180 mm travel
    Includes adjuster knobs & foot bolt
    Top cap threads 32 x 0.5 mm
    Shipping dimensions:  75 x 75 x 630 mm
    Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

    SRAM Part Code: 00.4020.170.000

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

    Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

    Learn More
  14. RockShox Lyrik Coil 170 mm Medium (SRAM)

    US$40.70

    Available on backorder

    SRAM Part Code: 11.4015.422.030 Learn More
  15. RockShox Lyrik Coil 170 mm Soft (SRAM)

    US$40.70

    Not Currently Available

    SRAM Part Code: 11.4015.422.020 Learn More
    • Out of stock

  16. RockShox Lyrik Service Kit (SRAM)

    US$75.65

    Available on backorder

    Service kit for 35 mm RockShox Lyrik A1 forks 2016-2017 with Solo Air spring. SRAM Part Code: 00.4315.032.621 Learn More
  17. Purchase a new Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with Shockcraft Matrix Tune to upgrade your RockShox 35 mm Lyrik 27/29, Yari 27/29 or Pike A2 29+ forks

    Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

    Pricing & Availability
    This product is a new RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 Damper RC2 with modifications & tuning, which includes labour, machining, new parts, consumables and fluids

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.170.000

    Rockeater Tune
    We also have our Rockeater Tuned Lyrik/Yari Charger 2.1 RC2 dampers, info here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More
  18. Purchase a new Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox 35 mm Lyrik 27/29, Yari 27/29 or Pike A2 29+ forks

    The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
    They have enough range to also work great for riders from 60-90 kg
    But even outside those limits they're better than anything you'll find factory

    The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

    As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

    Pricing & Availability
    This product is a new RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

    The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.170.000

    Matrix Tune
    If you want the full experience of a Matrix Tuned RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper we still have these too.  Information and pricing is here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options.


    Learn More
  19. RockShox MAG Fork Seal Kit (Enduro)

    US$10.79

    Last One Left

    Fits MAG 10, 20 & 21 forks Learn More
  20. Air-can service kit to fit RockShox Monarch shocks with Autosag fitted to Specialized bikes.
    Includes backup rings, quad-rings, o-rings and assembly lubrication.

    SRAM Part Code: 00.4315.032.480 Learn More
  21. Air can seal kit to fit RockShox Monarch Debonair rear shocks

    SRAM Part Code: 00.4315.032.540 Learn More
  22. RockShox Monarch Plus & RC3 Shock Service

    From: US$149.23

    To: US$218.67

    Full service pricing for RockShox Monarch Plus & RC3 shocks

    Includes a full damper service with air spring service
    Excludes repair & repair parts
    Air spring service available is with either a Shockcraft or OEM kit Learn More
  23. Full service kit to fit RockShox Monarch Plus B1 (2014+) rear shocks
    Fits both RC3 and R versions of this shock

    SRAM Part Code: 11.4118.038.002

    Learn More
  24. Full service kit for RockShox Monarch RL (B1), R/RT/RT3 (C1) & RT3 (D1) 2014+ rear shocks

    SRAM Part Code: 11.4118.038.000 Learn More
  25. RockShox Monarch RT3 2013 Service Kit (SRAM)

    US$38.16

    Available on backorder

    Service kit for RockShox Monarch RT3 2013 rear shocks Kit includes seals, backup rings, bushings & schrader valves SRAM Part Code: 11.4118.015.000 Learn More

Set Descending Direction

101-125 of 216