We are OPEN
Click here for updates on our current status.
 

$50 to $250

Set Descending Direction

1-25 of 28

Page:
  1. 1
  2. 2
  1. IVA: Incremental Volume Adjust
    A 5 position spacer system to tune positive air chamber volume and increase progression
    M32 x 1.0 mm thread

    Manitou Part Code: 141-32668-K001

    Learn More
  2. Bike Cleaning Kit (Motorex)

    US$51.51

    In Stock

    Motorex bike cleaning kit in a tub with sponge and cotton cloths for easy bike cleaning
    Includes Easy Clean 500 ml (degreasing agent for chains and derailleurs), Bike Clean 500 ml (bike cleaner) and Dry Power 100 ml chain lube

    Motorex Product Code: 305071

    Not available for shipping outside New Zealand.

    Learn More
  3. Treat someone who loves to ride with a gift voucher from Shockcraft.
    Only available through our New Zealand retail store (select New Zealand in dropdown at top right of screen). Learn More
  4. Charger Damper Bleed Kit
    For all Rockshox Charger 1 & Charger 2 dampers in Pike, Lyrik, Boxxer etc
    Kit includes 240 ml 3wt suspension fluid, one syringes and bleed fittings for Charger 1 (unique) and Charger 2 (M5)
    Will also work for IFP bleed of RS Monarch.

    SRAM Part Code: 00.4318.007.000 Learn More
  5. Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers 2015-2019
    Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
    Requires significant tools and knowledge to install
    Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)

    Learn More
  6. Air spring volume spacer kit for Fox CTD/DPS inline shocks
    5 pieces included
    Red 0.95 ci (15.6cc), Orange 0.8 ci (13.1cc) Yellow 0.6 ci (9.8cc), Green 0.4 ci (6.6cc), Pink 0.2 ci (3.3cc).

    Fox Part Code: 803-01-250 Learn More
  7. Air volume tuning kit for 2016-17 FLOAT X and 2018-21 DPX2 Shocks.
    Does not fit 2022+ FLOAT X.

    Fox Part Code: 803-01-251

    Learn More
  8. Dorado IRT Kit (Manitou)

    US$138.41

    Special Order ex-USA

    Dorado IRT (Infinite Rate Tune) upgrade assembly Fits all Manitou Dorado forks 2009 onwards Easy installation in place of lower leg air cap Includes instructions & pressure guide Manitou Part Code: 141-32668-K005 Learn More
  9. Dorado Pro Bleeder Caps Kit (Manitou)

    US$170.00

    Special Order ex-USA

    Trailside Relief press-button bleeder caps Fit all Dorado forks 2009 onwards Manitou Part Code: 141-32668-K006 Learn More
  10. Mattoc/Magnum IRT Upgrade Kit (Manitou)

    US$112.08

    Last One Left

    IRT: Infinite Rate Tune
    Adds a second air chamber for independent tuning of mid-end stroke.
    Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
    Manitou Part Code: 141-32668-K003 Learn More
  11. Air volume tuning kit for 2022+ FLOAT X shocks.
    Does not fit 2014-15 FLOAT X CTD or 2016-17 FLOAT X.

    Fox Part Code: 803-01-725

    Learn More
  12. Luftkappe for RockShox Zeb (Vorsprung)

    US$117.35

    Available Ex NZ Supplier 2 Days

    Vorsprung Luftkappe extended air piston and low volume sealhead for RockShox Zeb forks
    Fits 2021-22 RockShox Zeb forks, fits 2023 Zeb if 2021-22 air shaft installed
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  13. Shockcraft designed & Manufactured High Flow piston (rebound & mid valve) for Ohlins STX22 & TTX22 forks.
    Fits Ohlins RXF forks with TTX 22 or STX 22 dampers with 22mm pistons.  Not compatible with 18mm dampers.
    This piston greatly increases oil flow on compression and rebound to allow the fork to respond to sharp impacts in a way the stock fork cannot.
    Hard anodised aluminium with PTFE glide-ring 22 mm OD.  Bundle product includes PTFE band and valving configuration drawings.

    Shockcraft Part Code: SC-PISTON-OHLINS-22HF

    Learn More
  14. Treat someone who loves to ride with a gift voucher from Shockcraft.
    Only available through our New Zealand retail store (select New Zealand in dropdown at top right of screen). Learn More
  15. Corset for Fox FLOAT Rear Shocks (Vorsprung)

    Regular Price: US$119.75

    Special Price US$59.88

    Vorsprung Corset air sleeve with higher volume negative
    Fits Fox FLOAT and DHX Air rear shocks
    Requires grease and air chamber lubricant (Float Fluid or RWC APL) to install

    Learn More
  16. Grease Gun 75 g (Motorex)

    US$76.91

    In Stock

    High quality USA made Dualco grease gun by Motorex
    Can be reloaded with any grease
    86 cc capacity
    Excludes grease

    Motorex Part Code: 305029 Learn More
  17. Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
    Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
    Requires shaft clamp to install and is threaded onto air shaft.
    Included low volume sealhead increases negative volume similar to 2018 Evol spec
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  18. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
    Requires roll pin tool to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  19. Luftkappe for RockShox Pike/Lyrik 2014+ Solo Air (Vorsprung)

    US$102.30

    Available Ex NZ Supplier 2 Days

    Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Not compatible with Debonair V2 or V3 shafts.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  20. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  21. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  22. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB SRAM/Truvativ GXP cranksets (24-22 mm)

    Available in red or gold (pewter no longer available)

    Learn More
  23. Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More
  24. Monocrome Screw-Fit 41 mm Bottom Bracket for replacement and upgrade of press-fit BB86 and BB92 bottom brackets.  Designed and engineered by Shockcraft to solve fitment, creaking and bearing life issues.

    Fits Shimano, RaceFace, FSA etc 24 mm crank spindles.
    Fits SRAM/Truvative GXP with optional "Engagement Ring" adapter set.
    FIts Mountain Bike frames with 92 mm BB Shell width (incl 89.5 mm with 2.5 mm spacer - purchase spacer separately here).
    Fits Road & Cyclocross frames with 86 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Optional extras (purchased separately):
    Installation tools - IceToolz 11D3 tool or Park BBT-18 tool
    2.5 mm spacer (for MTB frames with 89.5 mm shell width)

    Learn More
  25. Monocrome Screw-Fit 46 mm Bottom Bracket for replacement and upgrade of press-fit 30 mm (PF30) bottom brackets.  Designed and engineered by Shockcraft's engineer to solve fitment, creaking and bearing life issues.

    FIts Mountain Bike frames with 73 mm BB Shell width.
    Fits Road & Cyclocross frames with 68 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Learn More

Set Descending Direction

1-25 of 28

Page:
  1. 1
  2. 2