You have no items in your shopping cart.
From: US$643.90
To: US$811.08
The Machete JUnit Expert is a high performance suspension fork for 20" and 24" wheeled bikes, bringing performance, speed and safety to younger riders.
Both 20" and 24" fork sizes have air springs and dampers tuned for lightweight riders with infinitely tunable air springs and fully revalvable ABS+ dampers.
The JUnit Expert features a 1.5” tapered alloy steerer tube and a forged hollow crown. Thirty-two millimeter, 6000 series black anodized stanchions are completed with Manitou’s signature Reverse Arch. Lightweight riders benefit from the easily adjustable Expert Air spring system, adjustable rebound, and Manitou's proven ABS+ damper.
20" Machete JUnit Expert is also available for fitment to cargo bikes (details here).
Available for order now. If not in stock please contact us and we can advise ETA.
1.5" headset lower cup assembly available to adapt Scott Roxter, Trek Roscoe, Avanti Montari and other bikes to fit the tapered steerer of the Manitou JUnit Machete.
Choose either the Premium version of the 1.5" headset lower cup assembly (with stainless steel bearings) or non-premium (chromium bearings)
From: US$73.12
To: US$409.75
From: US$63.19
To: US$372.17
From: US$63.19
To: US$372.17
From: US$63.19
To: US$408.28
From: US$150.45
To: US$2,318.66
Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins, modified Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring
Resulting combination bolts straight in
Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight. Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.
Please contact us to confirm availability
Tuning for your weight and riding style is also available - details here
Special Order ex-USA
From: US$640.90
To: US$827.45
Special size Manitou Mara Pro Air shock with custom shock pin to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion lower pin and Manitou Mara Pro piggy back shock.
Choose travel from 230 x 60 mm (stock Mara), 230 x 57.5 mm (stock trek ) to 230x65mm if you have clearance to do so.
Resulting combination bolts straight in
From: US$490.17
To: US$1,628.12
Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Remedy 2019-21 & Slash 2018-20 in place of a Thru-Shaft Reaktiv shock.
2019-2021 Remedy & 2018-2020 Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with upper 54 mm pin and lower 50 mm offset pin.
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring.
We can change the stroke on this shock from 0-65 mm.
Resulting combination bolts straight in.
Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight. Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.
Please contact us to confirm availability.
Tuning for your weight and riding style is also available - details here
Regular Price: US$728.15
Special Price US$580.72
Limited - Some Sizes In Stock Now
The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric trunnion version (trunnion top, eyelet bottom)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable
Manitou Part Codes: 192-36852-A013 to 192-36852-A020
Regular Price: US$728.15
Special Price US$580.72
Limited - Some Sizes In Stock Now
The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.
Manitou Part Codes: 192-36851-A021 to 192-36851-A026
Regular Price: US$728.15
Special Price US$580.72
Limited - Some Sizes In Stock Now
The Mara Pro is Manitou's new piggy back heavy duty air shock
Imperial eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable
Manitou Part Codes: 192-36851-A015 to 192-36851-A017
As low as: US$595.76
Hayes' award winning Dominion Brake
Available as A4 (4 piston) or A2 (2 piston)
Bronze levers & calipers with black lever bodies
Optional add-on here if you want Limited Edition Hayes Purple levers instead of the bronze levers
Piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Option of Standard (BFL) or Small Form Lever (SFL; designed for smaller hands)
Small Form Levers are designed for anyone with smaller hands (not just junior riders) - Ellen at Shockcraft/Biken uses SFL on her Dominion brakes
Dead stroke is factory set
Pre-bled with 90 cm hose for front use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors
Stock brake hose is 5.5 mm diameter
For frames requiring a smaller diameter or longer hose we have the Jagwire brake hose (5 mm diameter, 3 metre length) & adapter option available
One 3 m Jagwire brake hose & quick-fit adapter kit is enough for one bicycle (brakes front & rear)
Use this brake builder to select the brakes, rotors, adapters that you need for easy fit to your bike
From: US$508.50
To: US$1,020.02
Custom Hardware for fitting a Manitou Mara Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm
Resulting combination bolts straight in. The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding. We recommend a piggy back shock for more aggressive riders (Mara Pro). Tuning for your weight and riding style is also available.
Please contact us to confirm availability
From: US$658.95
To: US$1,247.19
Custom Hardware for fitting a Manitou Mara Pro Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and a Trek Specific Manitou Mara Pro 230 x 60 mm with a short snout conversion
Resulting combination bolts straight in. The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles. Tuning for your weight and riding style is also available - details here
Please contact us to confirm availability
As low as: US$938.78
From: US$388.15
To: US$397.42
Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
As low as: US$595.76
Hayes' award winning Dominion A4 Brake
Stealth grey levers with matte black calipers and lever bodies
Optional add-on here if you want Limited Edition Hayes Purple levers instead of the Stealth grey levers
Standard lever size (BFL)
Piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with 90 cm hose for front use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors
Stock brake hose is 5.5 mm diameter
For frames requiring a smaller diameter or longer hose we have the Jagwire brake hose (5 mm diameter, 3 metre length) & adapter option available
One 3 m Jagwire brake hose & quick-fit adapter kit is enough for one bicycle (brakes front & rear)
Use this brake builder to select the brakes, rotors, adapters that you need for easy fit to your bike
From: US$872.58
To: US$1,039.76
A high performance suspension fork for 20" and 24" wheeled bikes, bringing performance, speed and safety to younger riders.
The Machete JUnit Pro is the evolution of Manitou's JUnit suspension line. Building off of the already incredible Machete JUnit Expert, the Pro offers an added level of adjustability with IRT (Infinite Rate Tune). IRT offers improved small bump sensitivity without sacrificing any mid to late stroke support. This is especially important for youth riders who can easily be bumped off line by roots and rocks a heavier rider may not even notice. Available in both 20" and 24", this fork is a great upgrade for any youth rider looking to have more control on the trail.
20" Machete JUnit Pro is also available for fitment to cargo bikes (details here).
Available for order now. If not in stock please contact us and we can advise ETA.
1.5" headset lower cup assembly available to adapt Scott Roxter, Trek Roscoe, Avanti Montari and other bikes to fit the tapered steerer of the Manitou JUnit Machete.
Choose either the Premium version of the 1.5" headset lower cup assembly (with stainless steel bearings) or non-premium (chromium bearings)
From: US$388.15
To: US$397.42
Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$388.15
To: US$397.42
Vorsprung Smashpot coil conversion system for DVO Onyx SC 2019+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
Limited - Some Sizes In Stock Now
From: US$448.33
To: US$1,706.35
Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash 2021+ in place of a Thru-Shaft Reaktiv shock
2021+ Slash uses a 230 x 62.5 mm shock with 54 mm top and 40 mm lower centred hardware
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring
If using a Marzocchi Bomber CR 230 x 60 mm no additional spacers/labour required to fit but you will lose some travel
If using a Marzocchi Bomber CR 230 x 65 mm then a stroke reduction is required with shock head removal & re-gas
We can change the stroke on this shock from 0-65 mm
Resulting combination bolts straight in
Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight. Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.
Please contact us to confirm availability
Tuning for your weight and riding style is also available - details here
From: US$388.15
To: US$397.42
Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.