You have no items in your shopping cart.
Last One Left
IVA: Incremental Volume Adjust
A 5 position spacer system to tune positive air chamber volume and increase progression
M32 x 1.0 mm thread
Manitou Part Code: 141-32668-K001
In Stock
Motorex bike cleaning kit in a tub with sponge and cotton cloths for easy bike cleaning
Includes Easy Clean 500 ml (degreasing agent for chains and derailleurs), Bike Clean 500 ml (bike cleaner) and Dry Power 100 ml chain lube
Motorex Product Code: 305071
Not available for shipping outside New Zealand.
Available on backorder
Last One Left
Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers 2015-2019
Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
Requires significant tools and knowledge to install
Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)
Last One Left
Last One Left
Air volume tuning kit for 2016-17 FLOAT X and 2018-21 DPX2 Shocks.
Does not fit 2022+ FLOAT X.
Fox Part Code: 803-01-251
Special Order ex-USA
Special Order ex-USA
Last One Left
In Stock
Air volume tuning kit for 2022+ FLOAT X shocks.
Does not fit 2014-15 FLOAT X CTD or 2016-17 FLOAT X.
Fox Part Code: 803-01-725
Available Ex NZ Supplier 2 Days
Vorsprung Luftkappe extended air piston and low volume sealhead for RockShox Zeb forks
Fits 2021-22 RockShox Zeb forks, fits 2023 Zeb if 2021-22 air shaft installed
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)
In Stock
Shockcraft designed & Manufactured High Flow piston (rebound & mid valve) for Ohlins STX22 & TTX22 forks.
Fits Ohlins RXF forks with TTX 22 or STX 22 dampers with 22mm pistons. Not compatible with 18mm dampers.
This piston greatly increases oil flow on compression and rebound to allow the fork to respond to sharp impacts in a way the stock fork cannot.
Hard anodised aluminium with PTFE glide-ring 22 mm OD. Bundle product includes PTFE band and valving configuration drawings.
Shockcraft Part Code: SC-PISTON-OHLINS-22HF
Regular Price: US$120.92
Special Price US$60.46
Vorsprung Corset air sleeve with higher volume negative
Fits Fox FLOAT and DHX Air rear shocks
Requires grease and air chamber lubricant (Float Fluid or RWC APL) to install
In Stock
Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
Requires shaft clamp to install and is threaded onto air shaft.
Included low volume sealhead increases negative volume similar to 2018 Evol spec
Can be installed as part of any Shockcraft service (book here)
In Stock Now
Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
Requires roll pin tool to install
Can be installed as part of any Shockcraft service (book here)
Available Ex NZ Supplier 2 Days
Vorsprung Luftkappe air piston with higher volume negative
Fits 2014-2017 RockShox Pike & Lyrik forks
Fits 2018+ Lyrik & Yari
Fits 2018+ Rockshox Pike with an A2 Adapter.
Not compatible with Debonair V2 or V3 shafts.
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)
High Quality BSA Threaded external bottom bracket
Using standard, replaceable, 6805 bearings
Fully rebuildable
Steel or stainless bearing options
CNC Storm Drain options for extreme wet conditions
Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)
High Quality BSA Threaded external bottom bracket
Using standard, replaceable, 6805 bearings
Fully rebuildable
Steel or stainless bearing options
CNC Storm Drain options for extreme wet conditions
Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)
High Quality BSA Threaded external bottom bracket
Using standard, replaceable, 6805 bearings
Fully rebuildable
Steel or stainless bearing options
CNC Storm Drain options for extreme wet conditions
Compatible with MTB SRAM/Truvativ GXP cranksets (24-22 mm)
Available in red or gold (pewter no longer available)
In Stock
Monocrome Screw-Fit 41 mm Bottom Bracket for replacement and upgrade of press-fit BB86 and BB92 bottom brackets. Designed and engineered by Shockcraft to solve fitment, creaking and bearing life issues.
Fits Shimano, RaceFace, FSA etc 24 mm crank spindles.
Fits SRAM/Truvative GXP with optional "Engagement Ring" adapter set.
FIts Mountain Bike frames with 92 mm BB Shell width (incl 89.5 mm with 2.5 mm spacer - purchase spacer separately here).
Fits Road & Cyclocross frames with 86 mm BB Shell width by removing internal spacer.
Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.
Optional extras (purchased separately):
Installation tools - IceToolz 11D3 tool or Park BBT-18 tool
2.5 mm spacer (for MTB frames with 89.5 mm shell width)
Monocrome Screw-Fit 46 mm Bottom Bracket for replacement and upgrade of press-fit 30 mm (PF30) bottom brackets. Designed and engineered by Shockcraft's engineer to solve fitment, creaking and bearing life issues.
FIts Mountain Bike frames with 73 mm BB Shell width.
Fits Road & Cyclocross frames with 68 mm BB Shell width by removing internal spacer.
Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.