You have no items in your shopping cart.
Rebuild Kits & Parts
-
Internal actuator lever for Kindshock LEV
Bent type for internal use on posts with external cables.
Kindshock Part Number P3918 Learn More -
Fox Transfer Saddle Clamp Hardware Kit (FOX)
Includes bolt, pin and washer.
Fox Part Code: 803-01-281 Learn More -
Replacement stainless steel grub screw for general application. Useful on knobs and leavers. Learn More
-
Grub Screw M4 x 4 mm 304 Stainless
US$6.97In stock
Replacement stainless steel grub screw for trigger on a Manitou Jack dropper post.
Also for general application. Useful on knobs and leavers.
Image is indicative only. Learn More -
Hilo 100 Seatpost 22 mm Shaft Seal Kit (X-Fusion)
US$43.22Currently Unavailable
Fits X-Fusion Hilo 100 mm seatposts with 22 mm shaft X-Fusion Part Code: 42-HILOSEAL-101 Learn MoreOut of stock
-
Hilo 100 Seatpost 25 mm Shaft Seal Kit (X-Fusion)
US$43.22Currently Unavailable
Fits X-Fusion Hilo 100/125 mm seatposts with 25 mm shaft X-Fusion Part Code: 42-HILOSEAL-201 Learn MoreOut of stock
-
Jack Actuator Base (Manitou)
US$40.95Last One Left
Jack dropper post actuator base
Learn More
Threads into base of post and accepts cable
Manitou Part Code: 141-33419-K001 -
Jack Cartridge 125 mm (Manitou)
US$158.23No Longer Available
Replacement cartridge for Manitou Jack Dropper Post
125 mm version
Cartridge is servicable and rebuildable
Manitou Part Code: 141-35748-K002 Learn MoreOut of stock
-
Jack Cartridge 150 mm (Manitou)
US$189.95Replacement cartridge for Manitou Jack Dropper Post
150 mm version
Cartridge is servicable and rebuildable
Manitou Part Code: 141-35748-K002 Learn More -
Jack Collar and Bushing Kit (Manitou)
US$88.00Last One Left
Manitou Jack dropper post collar and bushing kit
Learn More
For spares or repair of Jack dropper seat posts
Manitou Part Code: 141-35749 -
RockShox AM Bleed Kit for Reverb & Charger 2 (SRAM)
US$84.90In stock
Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More -
Rockshox Reverb 200 Hour Seal Head Kit (SRAM)
US$65.77In stock
Fits RockShox Reverb & Reverb Stealth B1 seatposts
Includes replacement seal-head, foam ring, inner sealhead bushing, retainer clip & o-rings
SRAM Part Code: 11.6818.031.000 Learn More -
RockShox Reverb 2010-12 Full Servce Kit (SRAM)
US$104.07Available on backorder
Fits RockShox Reverb A1 seat posts (not Reverb Stealth)
SRAM Part Code: 11.6818.003.010 Learn More -
RockShox Reverb A1/A2/B1 Internal Seal Kit (Shockcraft)
US$46.01Built to Order
Application: RockShox Reverb A1, A2 and B1 Stealth & Non-Stealth
This comprehensive seal kit includes all o-rings that need replaced during a service
PDF showing contents of internal seal kit is available here
Learn More -
RockShox Reverb A2 200H 1 Year Service Kit (SRAM)
US$118.50In stock
Fits Reverb A2 dropper posts
Learn More
Non stealth models with external hose.
Includes new seal heads, bushings, internal seals and upgraded IFP
SRAM Part Code: 11.6818.031.005 -
RockShox Reverb Bushing with O-ring (SRAM)
US$17.71In stock
Rockshox Reverb & Stealth lower bushing.
Single bushing with o-ring to fit Reverb Reverb Stealth dropper posts
Installs into cartridge end-cap for service or repair.
SRAM Part Code: 11.6818.035.007 Learn More -
RockShox Reverb Cartridge End Cap (SRAM)
US$62.84Last One Left
Rockshox Reverb & Stealth cartridge end-cap.
Coarse thread version for A1 and A2 models.
Fits RockShox Reverb & Reverb Stealth up to 2016 (A1 & A2)
Includes inner and outer seals with lower bushing.
SRAM Part Code: 11.6818.017.020 Learn More -
RockShox Reverb Collar Connectamajig (SRAM)
US$42.09In stock
Connectamajig collar
Fits remotes for Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.4318.005.000 Learn More -
RockShox Reverb Connectamajig Hydraulic Hose Kit (SRAM)
US$36.07Last One Left
Fits RockShox Reverb Stealth seat posts
Includes hose with crimped on Connectamajig fitting and barb fitting for the lever end
Hose length 2000 mm
For non Connectamajig posts use 11.6815.025.030
SRAM Part Code: 11.6815.025.030 Learn More -
RockShox Reverb Hose Barb (SRAM)
US$14.60In stock
Fits all Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.6815.022.010 Learn More -
RockShox Reverb Hose Kit (SRAM)
US$45.10Last One Left
Rockshox Reverb Hose Kit.
Fits all RockShox Reverb & Reverb Stealth dropper posts
Includes new hose, strain relief & barb end fittings
Hose length 2000 mm
For Connectamajig use 11.6815.025.030
SRAM Part Code: 11.6815.025.010 Learn More -
Replacement IFP for Rockshox Reverb dropper posts.
Backwards compatible to all Reverb models, A1, A2, B1 and C1/AXS
SRAM Part Code: 11.6818.053.001 Learn More -
RockShox Reverb Lever Assembly & Hose A2 (SRAM)
US$151.89Last One Left
Rockshox Reverb & Reverb Stealth hydraulic hose and lever.
Includes push button remote & spare hose barb fittings.
Hose end not compatible with Connectamajig.
SRAM Part Code: 11.6815.026.050 Learn More -
RockShox Reverb Stealth A2 200H 1Year Service Kit (SRAM)
US$119.05Available on backorder
Fits Reverb Stealth A2 dropper posts
Includes new seal heads, bushings, internal seals and upgraded IFP
Replaces SRAM-11.6818.022.020
SRAM Part Code: 11.6818.031.004 Learn More -
RockShox Reverb Stealth B1 400 Hour 2 Year Service Kit (SRAM)
US$119.05Last One Left
RockShox Reverb Stealth B1 400 Hour 2 Year Service Kit (SRAM)
Includes bearing/seal heads for post and cartridge along with internal seals.
SRAM Part Code: 11.6818.031.001 Learn More
Recent Posts
-
We're very excited to support Journeys Central Otago, with a $500 dona... -
Bike of the Month May 2021 Our May 2021 Bike of the Month is Dave's S... -
We're looking for a second Suspension Technician to help with the incr...
Categories
Newsletter
Instagram
