Fork Service Kit Fox 32/34/36/40 Forks 2016+

Availability: In stock


Fork service kit for F32, F34, F36 & F40 forks 2016+ using contained FIT4 (CTD, RC2) or GRIP dampers.
Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool.

This kit replaces the 5wt teflon oil in GRIP dampers and lower legs with dedicated bath and damper oils.  The GRIP dampers do not suffer any more or less oil mixing than other cartridge dampers and teflon does not float in oil.


Slickoleum Assembly Grease 1 oz   +$14.40
30 ml Oil Syringe (Luer Lock)   +$3.50

* Required Fields




Kit containing all the essentials for servicing your FIT4/GRIP damper Fox Forx.

Additional Information
Fork Seal Kit

SKF Low Friction Fork Seal kits contain 2 seals, 2 foam rings and 4 crush washers (2 x 8 mm & 2 x 15 mm).

Fox 32, 34, 36 or 40 mm Flangeless Fork Seal Kit (SKF)  fits all Fox 32-40 mm forks.  These flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals.  We recommend the use of a seal press tool for installation.

Fork Oil

Damper oil available in seven weights.  All outperform the factory fluids in the hot and cold.

Motorex Fork Oil 2.5 wt
 - standard option to match stock oil viscosity (15 cSt @ 40°C)

Polar Oil - For cold conditions - very low pour point (15 cSt @ 40°C)
5 cSt Hydraulic Oil (Corex 5) - Super Light oil option (5 cSt @ 40°C)
10 cSt Hydraulic Oil (Corex 10) - Lightweight oil option (10 cSt @ 40°C)
Hot Oil Clear - Lightweight high performance option.  (7 cSt @ 40°C)
Hot Oil Pink - High performance option to match stock oil viscosity (14 cSt @ 40°C)
Hot Oil Green - Heavy Duty high performance option.  (19 cSt @ 40°C)

Note: oils are only available for shipping to New Zealand addresses. 

Bushing Lubricant

Motorex Supergliss 100k is an extra thick and slippery lubricating oil designed to cling to vertical surfaces.
Note: In below freezing conditions Supergliss can thicken up too much and push past wiper seals.  Use Polar Lube for very cold conditions.

Motorex Fully Synthetic Lubricating Oil works very well as a bushing lubricant for suspension fork lower legs.  It is the best all-round performer, with Supergliss better in the warm (10°C and above) and Polar Lube Oil better in the cold (0°C and below).

Motorex Polar Lube Oil
is ideal for cold conditions.  At 0°C it is 45% thinner than our normal Motorex Fully Synthetic and almost 60% thinner than Supergliss.

Assembly Grease Slickoleum is a premium assembly lubricant specially formulated by Arlo Englund, the inventor of Slick Honey. This grease is perfect for lubricating air seals and bushings while rebuilding Fox air forks.
Oil Syringes

Medical grade syringes available with or without the annoying questions the chemists always ask. Syringes only, no needles. Supplied with 10 cm clear tube for oil pickup (other tube lengths available on request).

Please note that some fluids (particularly brake fluids) can attack the plastic and rubber in these syringes so they can have a limited life. We strongly recommend using different syringes for brakes and forks. Brake fluid is not good for your forks and fork oil is not good for your brakes.

Seal Press Tool

Double ended tool for pressing wiper seals into 35 or 36 mm stanchioned forks
Works with both flanged and flangeless wiper seals
Designed & tested to work with SKF flangeless seals
Keeps seals straight and sets depth flush with top of fork casting in one hit
Prevents damage to seals and forks
Manufactured by Real World Cycling (RWC)