You have no items in your shopping cart.
Brand |
Manitou |
Stanchions |
34 mm Gold |
Model |
Mattoc 1 (Pro or Expert) |
Crown & Lowers |
Black, red or white |
Release Year/s |
2014/15 |
Decals |
Large Manitou graphic & M on other leg or Smaller Manitou graphic with crest and model triangles |
Damper |
Manitou MC2 with adjustable HSC, LSC, HBO and LSR |
Wheel Size |
26" or 27" version (convertible) |
Spring |
Dorado air spring with self balancing positive and negative chambers |
Configurations & Maximum Travel |
Non-boost 26" 170 mm Non-boost 27" 160 mm |
Make your Mattoc even better with these upgrades. Purchase either with a Shockcraft service or for DIY installation. Pricing is provided at links below.
Expert to Pro Conversion |
Upgrade damper to convert a Mattoc Expert to Mattoc Pro specification |
High Flow Piston (Mattoc Pro only) |
These pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run |
Incremental Volume Adjust (IVA) |
A 5 position spacer system to tune positive air chamber volume and increase progression |
Infinite Rate Tune (IRT) |
Adds a second individually tunable air chamber to the positive air side of Mattoc forks |
Sealing Upgrades Internal |
Internal seal upgrade to reduce bath oil migration. Included in Shockcraft Full Service. |
Wiper Seal Upgrade |
Low friction seals with foam rings for all Manitou 34 mm forks |
Stock |
Maxima 5 wt fork oil in damper - 75 mm oil height Pro, 77 mm Expert Motorex 5W40 Semibath lower leg - 7 cc per side Slickoleum - air piston & seals |
Shockcraft Recommended |
Motorex 2.5 wt fork oil or Hot Oil Pink damper oil Motorex Fully Synthetic or Supergliss lower leg bath oil Slickoleum - air piston & seals |
In Stock
Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113
Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396
Last One Left
In Stock Now
ABS+ & TPC compression knob detent ball
3.2mm diameter.
Sold individually.
Manitou Part Code: 141-26930-K042
Learn MoreIn Stock
ABS+ & TPC compression knob detent spring
Spare part for loss repair. Located on top of compression assembly under knob.
Fits 3.5mm pocket
6.3mm long, 3mm OD
Sold individually, 2 used in each knob.
Manitou Part Code: 141-26930-K041
Learn MoreMade to Order
From: US$27.83
To: US$40.21
Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance. Cures issue of friction and stiction to improve small bump control. Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.
Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks. Other sizes will have a slight delay as we manufacture tooling.
Motorex 2.5 wt fork oil - 15 cSt @ 40°C
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles
Motorex 4 wt fork oil
16 cSt @ 40°C
Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles
From: US$2.47
To: US$438.32
From: US$2.47
To: US$761.77
From: US$3.09
To: US$2,453.44
From: US$2.47
To: US$1,420.33
From: US$2.47
To: US$2,751.48
From: US$3.09
To: US$3,260.08
From: US$0.00
To: US$2,309.42
As low as: US$14.29
Motorex Fully Synthetic lubricating oil for air pistons and suspension forks lower leg bushings.
Manitou use this exact oil as Semi-Bath fork lubrication.
Specifications:
5W40 grade
88 cSt @ 40C
Pour Point <-50C
This is a slightly less awesome lubricant than Motorex Supergliss but works over a wider temperature range and is better in the cold.
Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
14 cSt @ 40°C
Discontinued.
Alternative product: 34 mm Fork Seal Kit Low Friction Flangeless (Manitou)
Kit includes 2 high quality Trelleborg Flanged seals, 2 foam rings and Slickoleum grease.
Fits 34 mm stanchioned Manitou forks from 2006 to present.
Flanged type for 44mm pocket.
Special compound for low friction & extreme low temperature performance
These flanged seals have the same fork compatibility as the flangeless option.
Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals.
A seal press tool is not essential for installation of the flanged seals but it does make the job easier.
Manitou Part Code: 141-34000
Replaces Part Numbers 141-30996-K007 & 83-2969
Out of stock
In Stock
As low as: US$151.54
Built to Order
Built to Order
As low as: US$114.43