You have no items in your shopping cart.
Last One Left
In Stock Now
Mattoc/Magnum HBO check spring
Spare part for loss repair. Located behind HBO cup on compression assembly.
7mm long, 4.2mm OD.
Manitou Part Code: 06-30829
Learn MoreIn Stock Now
Mattoc/Magnum HBO knob detent spring
Spare part for loss repair. Located inside HBO knob on top of compression assembly.
3.8mm long, 2mm OD
Sold individually, 2 used in each knob.
Manitou Part Code: 06-29643
Learn MoreBackorder ex-USA
Last One Left
Rebound assembly for Manitou Mattoc Pro and Magnum Pro 27+/29"
Cartridge rebound tube with 16mm piston. Can be upgraded with High Flow piston.
Manitou Part Code: 141-30996-K025
Learn MoreNo Longer Available
Replacement CSU/CSA for Manitou Mattoc
34 mm internally tapered stanchions
1.5" tapered steerer
Fits Pro & Expert models, both 26 & 27" models
44 mm total offset (includes lower leg offset)
Black anodised legs with matt black crown
Does not fit Boost forks
Manitou Part Code: 141-30996-K035
Out of stock
No Longer Available
Replacement CSU/CSA for Manitou Mattoc
34 mm internally tapered stanchions
1.5" tapered steerer
Fits Pro & Expert models, both 26 & 27" models
41 mm total offset (includes lower leg offset)
Black anodised legs with matte black crown
Does not fit Boost forks
Manitou Part Code: 141-30996-K032
Out of stock
Backorder ex-USA
Mattoc/Magnum/Mastodon Pro MC2 compression damper assembly
Adjustable LSC, HSC and HBO
Comes with knobs, springs and detent balls as shown
Pro version has smaller diameter HBO cup than Expert version
Manitou Part Code: 141-30996-K001
Backorder ex-USA
Mattoc/Magnum/Mastodon Pro knob kit
For MC2 compression damper in Pro level forks
LSC, HSC and HBO knobs with detent balls/springs and fixing nut/screw
Manitou Part Code: 141-32155-K015
In Stock Now
Mattoc/Magnum Pro MC2 compression damper HBO Cup
Spare part for repair or upgrading Mattoc Expert to Mattoc Pro damper
Pro HBO cup is smaller diameter than Expert version and must be used only with matching HBO cone.
Manitou Part Code: 126-30377
Learn MoreStarting at: US$10.29
Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel
Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)
Learn MoreIn Stock
In Stock
In Stock
In Stock
Replacement rebound knob & air cap for Manitou Mezzer, Mattoc, Mastodon, Magnum, JUnit (34 mm) and Circus Pro forks
Includes rebound knob mounting screw
Manitou Part Code: 141-32155-K016
In Stock Now
Shaft foot for Air Shaft in Manitou 34 mm forks up to 2020 with the Dorado Air system (incl Mattoc/Magnum 2015-20, Mastodon Pro)
Black aluminium 17 mm OD, 35 mm tall
M8 x 1.0 upper thread with slotted side
M12 x 1.5 lower thread with 8 mm external hex & schrader thread
Manitou Part Code: 121-27478
In Stock Now
Shaft foot for rebound damper in 34 mm Comp & Expert forks
Fits Magnum/Mattoc/Mastodon etc 34 mm forks with 12.7 mm aluminium rebound shaft
Black aluminium 19 mm OD, 31 mm tall
M10 x 1.25 upper thread
M12 x 1.5 lower thread with 8 mm internal hex
Manitou Part Code: 125-29191
In Stock Now
Shaft foot for rebound damper in Pro forks
Fits Minute/Machete/Magnum/Mattoc/Mastodon etc forks with 10 mm aluminium rebound shaft
Black aluminium 19 mm OD, 26 mm tall
M8 x 0.5 upper thread
M12 x 1.5 lower thread with 8 mm internal hex
Manitou Part Code: 125-30786
Trelleborg foot seal for Manitou fork rebound shafts 2008 & later
Also used on air shafts on forks 2014 & later
11 mm ID, 17 mm OD, 2 mm W
Sold individually
Manitou Part Code: 141-23987