WE ARE OPEN
Click here for updates on our current status.
 

Service & Replacement Parts

Set Descending Direction

19 Item(s)

  1. 8 mm Crush Washer (SRAM)

    US$1.36

    In Stock

    8 mm Crush Washer
    11mm OD, 1.6mm thick.
    Fits Fox, Rockshox & other forks.

    Sold indvidually. Learn More
  2. SKF seal head upgrade/replacement for RockShox charger 1 dampers
    Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
    Upgrade for early Pike forks built with Trelleborg seal head.
    Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

    SRAM Part Code: 11.4015.353.030 Learn More
  3. Spare pair of 8 mm crush washers for RockShox & Fox forks Protect lower legs from foot nuts/bolts These are sacrificial and should be replaced whenever fork foot nuts/bolts are removed Learn More
  4. Spare Pair of crush washer retainers for RockShox forks. Fits with 8mm crush washers Learn More
  5. Fork service kit for Rockshox Pike & Lyrik forks 2018+.
    Model years 2018 onwards with preset travel and Charger 2/2.1 RC, RCT3 or RC2 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  6. Fork service kit for Rockshox Pike & Lyrik forks with Dual Position Air (DPA) air springs.
    Model years 2014-2017 (Pike) and 2016-17 (Lyrik) with two position travel adjust and RC or RCT3 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil and tools Learn More
  7. Fork service kit for Rockshox Pike & Lyrik forks with Solo Air springs.
    Model years 2014-2017 (Pike) and 2016-17 (Lyrik) with preset travel and RC or RCT3 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  8. Fork service kit for Rockshox Yari forks A1-A2 2016-2020 with Motion Control damping.
    Yari is a Lyrik with a lower spec damper that can be upgraded.  Spring upgrades are the same as Lyrik.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  9. Fork Service Kit for RockShox 35 mm Forks

    From: US$1.24

    To: US$792.36

    Fork service kit containing fork seal kit (select either SKF or SRAM), internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool Learn More
  10. Fork Service Kit for RockShox Pike Forks

    From: US$1.24

    To: US$730.38

    Fork service kit containing full rebuild kit (SRAM) or fork seal kit (select either SKF or SRAM), fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool Learn More
  11. Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
    SRAM Part Code (for pack of 10): 11.4018.032.001

    Learn More
  12. SKF Low Friction Flangeless Fork Seal kit for RockShox 35 mm forks Learn More
  13. Single foam ring for RockShox 35 mm stanchioned forks Learn More
  14. RockShox 35 mm Fork Seal Kit (SRAM)

    From: US$2.72

    To: US$32.84

    Original RockShox 35 mm fork seal kit. Fits RockShox Boxxer (2010+), Domain Dual Crown, Lyrik & Pike (2014+) forks Learn More
  15. Charger Damper Bleed Kit
    For all Rockshox Charger 1 & Charger 2 dampers in Pike, Lyrik, Boxxer etc
    Kit includes 240 ml 3wt suspension fluid, one syringes and bleed fittings for Charger 1 (unique) and Charger 2 (M5)
    Will also work for IFP bleed of RS Monarch.

    SRAM Part Code: 00.4318.007.000 Learn More
  16. These are only available for Pike, other applications have been superseded by the Debonair C1 (V3).

    Superseded by SRAM-LYRIKPIKEDEBONAIR-AIRSHAFTUPV3

    Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
    Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
    This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

    These are available for self-install or can be installed as part of a Shockcraft service. Learn More
  17. Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
    It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

    These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

    All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

    V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    Learn More
  18. Application: 2014-18 RockShox 35 mm Pike/Lyrik/Boxxer forks with Charger RC or RCT3 dampers.

    PDF showing contents of kit is available here Learn More
  19. Schrader Valve Core with short 16 mm length
    5V1 thread
    Part Code: 98-30474

    Learn More

Set Descending Direction

19 Item(s)