We're excited to announce the launch of Biken Distribution.
Biken has grown from all the brands and products at Shockcraft that aren't strictly suspension, and includes a special focus on quality kids' MTB products.  Visit Biken

Upgrades & Tuning

Set Descending Direction

11 Item(s)

  1. SKF seal head upgrade/replacement for RockShox charger 1 dampers
    Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
    Upgrade for early Pike forks built with Trelleborg seal head.
    Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

    SRAM Part Code: 11.4015.353.030 Learn More
  2. Fork Bushing Burnishing (Shockcraft)

    From: US$24.63

    To: US$38.70

    Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
    Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

    Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

    Learn More
  3. Fork Silent Treatment (Shockcraft)

    From: US$123.13

    To: US$137.20

    Permanent repair of creaking and ticking noises from fork crowns.  Also improves fork stiffness.  Shockcraft have the technology and understanding to dismantle and reassemble fork crowns for permanent creak repair.

    Note that damaged crowns will be rejected.  This is not a repair for parts stretched or bent.

    Available immediately for RS Pike 35 mm, RS Lyrik 35 mm, Fox 36 mm, Fox 34 mm, Manitou 34 mm and Manitou 32 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

    Learn More
  4. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Not compatible with Debonair V2 or V3 shafts.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  5. Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
    SRAM Part Code (for pack of 10): 11.4018.032.001

    Learn More
  6. SKF Low Friction Flangeless Fork Seal kit for RockShox 35 mm forks Learn More
  7. RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    From: US$56.99

    To: US$79.65

    These are only available for Pike, other applications have been superceeded by the Debonair C1 (V3).


    Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
    Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
    This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

    These are available for self-install or can be installed as part of a Shockcraft service. Learn More
  8. RockShox DebonAir V3 Seal Head Upgrade Kit (SRAM)

    Contains a new seal-head and shaft foot to upgrade Debonair V2 (MY2019 or 2020)  to Debonair V3 (MY 2021)
    This kit only works on Debonair 2 shafts, identified by a moulded plastic black or grey air piston (visible down the top of the stanchion).
    It is not compatible with earlier Solo Air shafts or Debonair v1 (wich had a silver bolt visible in the top of the air piston).

    Fits Pike, Revelation, Lyrik and Yari with Debonair V2 air shafts.

    SRAM Part Code:  00.4020.573.000 Learn More
  9. Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
    It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

    These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

    All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

    V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    Learn More
  10. Vorsprung Smashpot coil conversion system for Rockshox Lyrik & Yari forks
    Fits Rockshox Lyrik, Yari, Some Pike & Revelation forks with 35mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike available on request.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  11. Unharsh damper modification and custom tuning for Rockshox Charger Damper forks:
    Charger 1, 2 & 2.1 generations
    RC, RC2, RCT3 etc variations
    SID, Pike, Lyrik, Boxxer etc.

    Also available for RockShox Yari with purchase of a new Charger 2.1 damper (contact us for pricing)

    Send us your fork or damper and we will modify and tune it to your weight and riding style.  This service reduces harshness while increasing support and compliance.

    Includes labour, consumables and fluids for dampers in good working condition.
    Excludes repairs & any additional repair parts Learn More

Set Descending Direction

11 Item(s)