We are OPEN, shipping orders and servicing suspension & dropper posts.
International parcels are taking substantially longer than usual to reach their destination.
 

Update Parts

Update Parts are to bring a fork or shock up to date with revised parts from the original manufacturer, usually to improve performance and/or reliability.

Examples include updated wiper seals, damper seal heads, air seal heads and axles.

Set Descending Direction

12 Item(s)

  1. A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Magnum, Machete, Mattoc, Minute or Marvel QR15 forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K001 Learn More
  2. A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Mattoc, Magnum & Machete QR15 Boost forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K002

    Learn More
  3. Valve-cap for Manitou 34 mm forks (Mattoc, Magnum & Mastodon) using IRT, TS or ISO air spring systems
    Replacement part or upgrade for early forks using a conventional valve cap
    Manitou Part Code: 127-31811

    Learn More
  4. SKF seal head upgrade/replacement for RockShox charger 1 dampers
    Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
    Upgrade for early Pike forks built with Trelleborg seal head.
    Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

    SRAM Part Code: 11.4015.353.030 Learn More
  5. Kit includes 2 high quality Trelleborg seals, 2 foam rings and Slickoleum grease.
    Fits 34 mm stanchioned Manitou forks from 2006 to present.
    Flanged type for 44mm pocket.
    Special compound for low friction & extreme low temperature performance

    Manitou Part Code: 141-34000
    Replaces Part Numbers 141-30996-K007 & 83-2969

    Learn More
  6. 31 mm piston assembly with seal and Slickoleum assembly grease
    Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
    Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
    Manitou Part Code: 141-30996-K023

    Learn More
  7. 29 mm piston assembly with seal and glide-rings
    Replacement air piston for Manitou Mattoc Comp & Magnum Comp (2015-17) & Mastodon Comp forks with Dorado Air spring system (valve underneath by axle)
    Upgrade air piston for 2014 Mattoc Comp & Magnum Comp forks which had the piston with the single white glide-ring
    Manitou Part Code: 126-27479-L001

    Learn More
  8. Charger 2.1 Damper Seal-Head.
    Also fits Charger 2.0 damper
    Red colour and lower friction seal than previous
    Use for repair or service.

    SRAM Part Code: 11.4018.107.000 Learn More
  9. RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    From: US$53.81

    To: US$70.43

    These are no longer available from our supplier. Limited sizes available.

    Superseded by SRAM-LYRIKPIKEDEBONAIR-AIRSHAFTUPV3

    Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
    Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
    This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

    These are available for self-install or can be installed as part of a Shockcraft service. Learn More
  10. Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
    It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

    These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

    All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time. Learn More
  11. Replacement and updated air seal head assembly for RS Pike A1-A2 and Pike Boost from 2014-2017
    Solo Air forks only
    SRAM Part Code: 11.4018.037.000

    Learn More
  12. Charger 2 Damper Upgrade Kit
    Fits 32mm SID 27-29" 2012-2016, Reba 27-29 (2012-2017) and Bluto
    Max 120mm travel
    RLC (rebound, lockout and compression) adjust.
    With One-Lock cable remote.

    SRAM Part Code: 00.4018.783.011 Learn More

Set Descending Direction

12 Item(s)