We Are Open.
Detail on our current operation during NZ's Covid-19 lockdown is available
here.
 

Vorsprung for Forks

Set Descending Direction

1-25 of 29

Page:
  1. 1
  2. 2
  1. 10 mm Shaft Clamp (Vorsprung)

    US$27.86

    In stock

    Shaft clamp tool for use in installation of Luftkappe & Secus

    Learn More
  2. Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers 2015-2019
    Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
    Requires significant tools and knowledge to install
    Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)

    Learn More
  3. Adapter for installing 2014+ RS Pike/Lyrik Solo Air Luftkappe for A2 chassis Pike into 2018 RockShox Pike with B1 chassis.

    Note 29+ Pike (2017/18) is built on the Lyrik/Yari B1 chassis and does not require this adapter.

    Learn More
  4. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
    Requires roll pin tool to install as it is pinned to the air shaft.
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  5. Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
    Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
    Requires shaft clamp to install and is threaded onto air shaft.
    Included low volume sealhead increases negative volume similar to 2018 Evol spec
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  6. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
    Requires roll pin tool to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  7. Luftkappe for Fox Float 36 NA1 2015-17 (Vorsprung)

    US$123.37

    Available on backorder

    Vorsprung Luftkappe extended air piston and low volume sealhead for Fox 36 NA1 forks
    Fits 2015-17 Fox Float 36 NA forks with central needle in air chamber
    Requires 10 mm shaft clamp to install
    Included low volume sealhead extension increases negative volume further
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  8. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Not compatible with Debonair V2 or V3 shafts.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  9. Luftkappe Roll Pin Tool (Vorsprung)

    US$27.86

    Available on backorder

    Roll pin tool for use in installation of Luftkappe in Fox Float 34 Evol 2018+, 34 NA2 2016-17 & 36 Evol 2018+ forks

    Learn More
  10. Air piston removal tool for Fox 40 mm forks
    For use in installation of Vorsprung Secus Learn More
  11. If you have a Debonair C1 air spring for RockShox Lyrik/Pike, a replacement 35 mm Debonair this B1-style sealhead is now available.
    The C1 sealhead effectively shortens the air shaft and reduces/eliminates the pneumatic topout control present in the B1/B2 air shaft assemblies.
    While the Secus can be physically attached to a C1 Debonair air shaft assembly, it will reduce your travel and may top out noticeably loudly.  We strongly recommend replacing the C1 sealhead with a B1 sealhead.
    Learn More
  12. Secus Fox A1 foot stud to fit a Secus to Fox 32, 34 & 36 mm stanchioned forks Learn More
  13. Secus Fox A2 foot stud to fit a Secus to Fox 38 mm stanchioned forks Learn More
  14. Secus Foot Stud Fox A3 (Vorsprung)

    US$66.83

    Last One Left

    Secus Fox A3 foot stud to fit a Secus to Fox 40 mm stanchioned forks
    This kit includes the same foot stud as the one in the Fox A1 kit, but includes a replacement air piston for the Fox 40 Learn More
  15. Secus Foot Stud RockShox A1 (Vorsprung)

    US$57.63

    No Longer Available

    Secus RockShox A1 foot stud to fit a Secus to Rockshox forks

    This has been superseded by the RockShox A2 foot stud.  The RockShox A2 foot stud fits all the same forks as the A1 kit, plus more. Learn More
    • Out of stock

  16. Secus RockShox A2 foot stud to fit a Secus to Rockshox forks

    This supersedes the RockShox A1 foot stud.  The RockShox A2 foot stud fits all the same forks as the A1 kit, plus more. Learn More
  17. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 32, 34 & 36 mm stanchioned forks & Marzocchi Z1 2019+ forks (see Compatibility info).  Also available for RockShox & Fox 38/40 mm forks.
    Learn More
  18. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 38 mm stanchioned forks (see Compatibility info).  Also available for RockShox, Fox 32/34/36/40 mm & Marzocchi forks.
    Learn More
  19. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 40 mm stanchioned forks (see Compatibility info).  Also available for RockShox, Fox 32/34/36/38 mm & Marzocchi forks.
    Learn More
  20. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
    Learn More
  21. Vorsprung Smashpot coil conversion system for Fox 36 forks
    Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
    2021+ Fox 36 forks require the 20 mm top cap adapter
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  22. Smashpot Coil Conversion for Fox 38 (Vorsprung)

    From: US$323.53

    To: US$406.27

    Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  23. Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
    Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  24. Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  25. Vorsprung Smashpot coil conversion system for Rockshox Lyrik, Yari & Zeb forks
    Fits Rockshox Lyrik, Yari, Zeb, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike available on request.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More

Set Descending Direction

1-25 of 29

Page:
  1. 1
  2. 2