You have no items in your shopping cart.
As low as: US$112.75
Replacement of individual Stanchion or Steerer Tubes in fork crowns. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.
Note that damaged crowns and tubes will be rejected.
Shockcraft Part Code: LBR-FORKTUBESWAP
As low as: US$144.97
As low as: US$171.87
Permanent repair of creaking and ticking noises from fork crowns. Also improves fork stiffness. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for permanent creak repair.
Note that damaged crowns will be rejected. This is not a repair for parts stretched or bent.
Pricing depends on whether you send in a Crown Steerer Unit (CSU) only or a whole fork. There is no additional service charge when sending in a CSU only. When sending in a whole fork there is a charge for the labour to dismantle the fork and replace fluids upon reassembly. Forks with cartridge dampers (e.g. Fox FIT/GRIP/GRIP2/CTD, RockShox Charger, Manitou MC2 or Mezzer) require a minimum of a Lower Leg & Air Spring Service. Forks with in-leg or open bath dampers (e.g. Fox open bath, RockShox all except Charger, Marzocchi Z2) require a minimum of a Standard Service. The service labour pricing provided excludes additional repair. Parts, oil and freight are additional and vary depending on the brand & model and the problems found.
Available immediately for RS Pike 35 mm, RS Lyrik 35 mm, RS 32 mm Fox 36 mm, Fox 34 mm, Fox 32 mm Manitou 34, 32 and 30 mm, MRP Ribbon 35mm forks and more. New sizes have a slight delay as we design and manufacture tooling.
Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance. Cures issue of friction and stiction to improve small bump control. Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.
Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks. Other sizes will have a slight delay as we manufacture tooling.
Replacement or resizing of fork bushings to fix looseness, knocking or play. Includes burnishing to final size.
Available immediately for 28.6 mm, 30 mm, 32 mm, 34 mm, 35 mm, 36 mm and 40 mm forks. Other sizes will have a slight delay as we manufacture tooling.
Note wiper seals need removed for this service and almost always require replacement.
A Shim Shuffle is changing the stock tune in a fork or shock damper to another factory pre-configured tune. For example changing a medium tune to a firm tune or a soft tune.
It is only available with a fork or shock service where factory tunes are published. It does not include any shims or parts, they are charged separately if required.
This charge is for shim shuffle as part of any compatible fork or shock service.