We are OPEN
Click here for our current status and how we are affected by Covid-19 restrictions.

 

RockShox Yari

Service pricing for the RockShox Yari is provided below.  Further information on these forks and available parts, lubricants, upgrades and tuning from Shockcraft is over here.

Set Descending Direction

8 Item(s)

  1. Lower leg & air spring service pricing for RockShox Yari
    Includes labour, consumables and fluids
    Excludes wiper seals, repairs & repair parts

    Select special service & upgrade options to view pricing Learn More
  2. Fork Tube Swap (Shockcraft)

    From: US$96.65

    To: US$557.32

    Replacement of individual Stanchion or Steerer Tubes in fork crowns.  Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.
    Note that damaged crowns and tubes will be rejected. 

    Shockcraft Part Code:  LBR-FORKTUBESWAP

    Learn More
  3. Full service pricing for RockShox Yari
    Includes labour, consumables and fluids
    Excludes wiper seals, repairs & repair parts

    Select special service & upgrade options to view pricing Learn More
  4. Normally you book your fork, shock or dropper post for a Shockcraft service and send it when you can.  We service parts in the order that they arrive.  In busy times this can mean up to a month with a bike in pieces and no riding.

    With our new Book Now, Send Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  Use our Carrier Kereru (Pigeon) Pickup service and we'll organise courier collection.  This can bypass much of the downtime.

    See our Terms & Conditions below. Learn More
  5. Free option to cut down the wait time for customers dropping off & collecting their fork, shock or dropper post.

    Normally you would book your fork, shock or dropper post for a Shockcraft service and get it in to us when you can.  We service parts in the order that they arrive.  In busy times this can mean up to a month with a bike in pieces and no riding.

    With our new Book Now, Drop Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  This is a free service for those dropping in and collecting their service parts (if you are too far away to drop off/collect then you can use our Book Now, Send Later service).  This can bypass much of the downtime.

    See our Terms & Conditions below. Learn More
  6. Fork Silent Treatment (Shockcraft)

    From: US$122.42

    To: US$318.93

    Permanent repair of creaking and ticking noises from fork crowns.  Also improves fork stiffness.  Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for permanent creak repair.

    Note that damaged crowns will be rejected.  This is not a repair for parts stretched or bent.

    Pricing depends on whether you send in a Crown Steerer Unit (CSU) only or a whole fork.  There is no additional service charge when sending in a CSU only.  When sending in a whole fork there is a charge for the labour to dismantle the fork and replace fluids upon reassembly.  Forks with cartridge dampers (e.g. Fox FIT/GRIP/GRIP2/CTD, RockShox Charger, Manitou MC2 or Mezzer) require a minimum of a Lower Leg & Air Spring Service.  Forks with in-leg or open bath dampers (e.g. Fox open bath, RockShox all except Charger, Marzocchi Z2) require a minimum of a Standard Service.  The service labour pricing provided excludes additional repair.  Parts, oil and freight are additional and vary depending on the brand & model and the problems found.

    Available immediately for RS Pike 35 mm, RS Lyrik 35 mm, RS 32 mm Fox 36 mm, Fox 34 mm, Fox 32 mm Manitou 34, 32 and 30 mm, MRP Ribbon 35mm  forks and more.  New sizes have a slight delay as we design and manufacture tooling.

    Learn More
  7. Fork Bushing Burnishing (Shockcraft)

    From: US$25.77

    To: US$38.66

    Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
    Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

    Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

    Learn More
  8. Replacement or resizing of fork bushings to fix looseness, knocking or play.  Includes burnishing to final size.

    Available immediately for 28.6 mm, 30 mm, 32 mm, 34 mm, 35 mm, 36 mm and 40 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

    Note wiper seals need removed for this service and almost always require replacement.

    Learn More

Set Descending Direction

8 Item(s)