We are OPEN
Click here for updates on our current status.
 

Ohlins Upgrades

Set Descending Direction

12 Item(s)

  1. Fork service & upgrade kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
    Service kit works for all internals (air, coil, TTX22, STX22, TTX18 etc etc).
    Optional high flow piston kit works for TTX22 and STX22 versions only.

    Learn More
  2. HBO Revalve Kit (Shockcraft)

    As low as: US$55.90

    Shockcraft shim and drawing kit for revalving Vorsprung Smashpot HBO
    Allows revalving of the HBO circuit to be softer and allow full use of the last 30 mm of travel
    4 tunes shown on the drawing, Bypass, Soft, Medium and Firm plus Stock
    Drawing lays out the shims required for each tune (paper drawing & to scale)
    Allows full travel without hitting the wall
    Installation requires special tools and knowledge
    Recommend Motorex Supergliss 100K (warm climate), Supergliss 68K (cool climate) or Motorex 2 to 7.5 wt

    Shockcraft can revalve the HBO during service if you don't feel confident doing it yourself Learn More
  3. Shockcraft manufactured high flow piston kit.
    Fits and works in TTX22 and STX22 forks (coil or air) only.
    Kit contains piston, glide ring and 4 pages of paper drawings.

    Shockcraft Part Code:  SC-PISTON-OHLINS-22HF-KIT

    Learn More
  4. Spare heat shrink for Vorsprung Smashpot cartridge tube
    Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More
  5. Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  6. Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  7. Replacement heat shrink for Vorsprung Smashpot coil springs Learn More
  8. Individual coil springs for the Vorsprung Smashpot coil conversion system
    Includes heat shrink as pictured and spring isolator perch (also available separately here)
    Spring rates available from 30-80 lb/in in 5 lb/in increments
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  9. Replacement Smashpot foot stud assembly to fit Öhlins RFX36 forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or DVO fork to an Öhlins RFX36 fork
    You will also need the Smashpot top cap for the Öhlins RFX36 forks (see related products) Learn More
  10. Smashpot HBO Knob (Vorsprung)

    US$12.15

    Last One Left

    Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More
  11. Smashpot Spring Isolator Perch Universal (Vorsprung)

    US$27.34

    Available Ex NZ Supplier 2 Days

    2 piece isolator system helps keep the coil spring quiet and stanchions protected internally when installing the Vorsprung Smashpot coil conversion
    Retrofittable to older Smashpot Coil Conversion kits
    Can be used in all forks instead of the older style spring perch
    Replaces the PVC liner previously used in the RockShox Zeb and Fox 38 kits

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time. Learn More
  12. Smashpot Top Cap (Vorpsprung)

    From: US$28.35

    To: US$35.85

    Replacement Vorsprung Smashpot top caps
    To swap a Smashpot to another fork you'll need the right top cap for the fork
    If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More

Set Descending Direction

12 Item(s)