You have no items in your shopping cart.
Smashpot Coil Conversion
-
HBO Revalve Kit (Shockcraft)
As low as: US$55.90
Shockcraft shim and drawing kit for revalving Vorsprung Smashpot HBO
Allows revalving of the HBO circuit to be softer and allow full use of the last 30 mm of travel
4 tunes shown on the drawing, Bypass, Soft, Medium and Firm plus Stock
Drawing lays out the shims required for each tune (paper drawing & to scale)
Allows full travel without hitting the wall
Installation requires special tools and knowledge
Recommend Motorex Supergliss 100K (warm climate), Supergliss 68K (cool climate) or Motorex 2 to 7.5 wt
Shockcraft can revalve the HBO during service if you don't feel confident doing it yourself Learn More -
Smashpot Coil Conversion for Öhlins RXF38 (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
Learn More
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Foot Stud Assembly for DVO Forks (Vorsprung)
US$66.84Last One Left
Replacement Smashpot foot stud assembly to fit DVO Onyx SC forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or Öhlins fork to a DVO Onyx SC fork
You will also need the Smashpot top cap for the DVO Onyx SC forks (see related products) Learn More -
Smashpot Foot Stud Assembly for Öhlins Forks (Vorsprung)
US$66.84In Stock Now
Replacement Smashpot foot stud assembly to fit Öhlins RFX36 forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or DVO fork to an Öhlins RFX36 fork
You will also need the Smashpot top cap for the Öhlins RFX36 forks (see related products) Learn More -
Smashpot HBO Knob (Vorsprung)
US$12.15Last One Left
Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More -
Smashpot Coil Conversion for DVO Onyx SC (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for DVO Onyx SC 2019+ forks
Learn More
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Coil Conversion for Öhlins RXF36 (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
Learn More
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Travel Adjust Kit (Vorsprung)
From: US$16.07
To: US$40.35
Travel adjust kit for Vorsprung Smashpot
Includes 10 mm top out travel spacers (x5, silver in picture) & spring travel spacers (2 x 2 mm, 1 x 10 mm, 2 x 20 mm black acetal spacers)
Required for changing travel if you do not have the original parts Learn More -
Smashpot Coil Spring Spare Heat Shrink (Vorsprung)
US$6.26In Stock Now
Replacement heat shrink for Vorsprung Smashpot coil springs Learn More -
Smashpot Spring Isolator Perch Universal (Vorsprung)
US$27.34Available Ex NZ Supplier 2 Days
2 piece isolator system helps keep the coil spring quiet and stanchions protected internally when installing the Vorsprung Smashpot coil conversion
Retrofittable to older Smashpot Coil Conversion kits
Can be used in all forks instead of the older style spring perch
Replaces the PVC liner previously used in the RockShox Zeb and Fox 38 kits
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. Learn More -
Smashpot Coil Conversion for RockShox Zeb (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Learn More
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Coil Conversion for Fox 38 (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
Learn More
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Coil Conversion for RS 35 mm Pike, Lyrik, Yari etc (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Learn More
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Coil Conversion for Fox 36 2015+ (Vorsprung)
From: US$391.93
To: US$417.27
Vorsprung Smashpot coil conversion system for Fox 36 forks
Learn More
Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
2021+ Fox 36 forks require the 20 mm top cap adapter
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Coil Springs (Vorsprung)
US$84.46Individual coil springs for the Vorsprung Smashpot coil conversion system
Learn More
Includes heat shrink as pictured and spring isolator perch (also available separately here)
Spring rates available from 30-80 lb/in in 5 lb/in increments
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
All sizes ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot Cartridge Tube Spare Heat Shrink (Vorsprung)
US$5.77Last One Left
Spare heat shrink for Vorsprung Smashpot cartridge tube
Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More -
Smashpot Foot Stud Assembly for Fox & Marzocchi Forks (Vorsprung)
US$66.84Last One Left
Replacement Smashpot foot stud assembly to fit Fox forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a RockShox, Öhlins or DVO fork to a Fox fork
You will also need the Smashpot top cap for your specific Fox fork model (see related products) Learn More -
Smashpot Foot Stud Assembly for RockShox Forks (Vorsprung)
US$66.84Available Ex NZ Supplier 2 Days
Replacement Smashpot foot stud assembly to fit RockShox forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a Fox, Öhlins or DVO fork to a RockShox fork
You will also need the Smashpot top cap for your specific RockShox fork model (see related products) Learn More -
Smashpot Top Cap (Vorpsprung)
From: US$28.35
To: US$35.85
Replacement Vorsprung Smashpot top caps
To swap a Smashpot to another fork you'll need the right top cap for the fork
If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More -
Smashpot Coil Conversion for Marzocchi Z1 2019+ (Vorsprung)
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
Learn More
Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time. -
Smashpot 20 mm Top Cap Adapter for 2021 Fox 36 mm Forks (Vorsprung)
US$15.98In Stock Now
20 mm top cap adapter required to fit Smashpot Coil Conversion to 2021+ Fox 36 forks Learn More
Shop By
Shopping Options
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
