We are OPEN
Click here for updates on our current status.
 

Ohlins

Set Descending Direction

8 Item(s)

  1. HBO Revalve Kit (Shockcraft)

    As low as: US$55.90

    Shockcraft shim and drawing kit for revalving Vorsprung Smashpot HBO
    Allows revalving of the HBO circuit to be softer and allow full use of the last 30 mm of travel
    4 tunes shown on the drawing, Bypass, Soft, Medium and Firm plus Stock
    Drawing lays out the shims required for each tune (paper drawing & to scale)
    Allows full travel without hitting the wall
    Installation requires special tools and knowledge
    Recommend Motorex Supergliss 100K (warm climate), Supergliss 68K (cool climate) or Motorex 2 to 7.5 wt

    Shockcraft can revalve the HBO during service if you don't feel confident doing it yourself Learn More
  2. Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  3. Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  4. Replacement Smashpot foot stud assembly to fit Öhlins RFX36 forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or DVO fork to an Öhlins RFX36 fork
    You will also need the Smashpot top cap for the Öhlins RFX36 forks (see related products) Learn More
  5. Smashpot Top Cap (Vorpsprung)

    From: US$28.35

    To: US$35.85

    Replacement Vorsprung Smashpot top caps
    To swap a Smashpot to another fork you'll need the right top cap for the fork
    If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More
  6. Spare heat shrink for Vorsprung Smashpot cartridge tube
    Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More
  7. Smashpot Travel Adjust Kit (Vorsprung)

    From: US$16.07

    To: US$40.35

    Travel adjust kit for Vorsprung Smashpot
    Includes 10 mm top out travel spacers (x5, silver in picture) & spring travel spacers (2 x 2 mm, 1 x 10 mm, 2 x 20 mm black acetal spacers)
    Required for changing travel if you do not have the original parts Learn More
  8. Individual coil springs for the Vorsprung Smashpot coil conversion system
    Includes heat shrink as pictured and spring isolator perch (also available separately here)
    Spring rates available from 30-80 lb/in in 5 lb/in increments
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More

Set Descending Direction

8 Item(s)