Cyber Sale 2020

Hayes  new brake for 2020 - the Dominion A2
2 piston version of the award winning Dominion A4
Two piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with 90 cm hose for front use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes  new brake for 2020 - the Dominion A2
2 piston version of the award winning Dominion A4
Two piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with long cm hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes  new brake for 2020 - the Dominion A2 JUnit SFL
SFL is a Small Form Lever - designed for the smaller hands of junior riders.

2 piston version of the award winning Dominion A4
Two piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with short hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Hayes Part Code: 95-36115-K151

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes  new brake for 2020 - the Dominion A2 JUnit SFL
SFL is a Small Form Lever - designed for the smaller hands of junior riders.

2 piston version of the award winning Dominion A4
Two piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with long cm hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Hayes Part Code: 95-36115-K152

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes brand new brake for 2018 - the Dominion A4
Four piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with 90 cm hose for front use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes brand new brake for 2018 - the Dominion A4
Four piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with 180 cm hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes  new brake for 2020 - the Dominion A4 JUnit SFL
SFL is a Small Form Lever - designed for the smaller hands of junior riders.

Junior version of the award winning Dominion A4
Four piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with short hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Hayes Part Code: 95-36115-K051

Available direct from Shockcraft or via your local bike shop

Learn More

Hayes new brake for 2020 - the Dominion A4 JUnit SFL
SFL is a Small Form Lever - designed for the smaller hands of junior riders.

Junior version of the award winning Dominion A4
Four piston caliper with cross-hair alignment
Flippable lever with reach adjustment
Dead stroke is factory set
Pre-bled with long hose for rear use
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors

Hayes Part Code: 95-36115-K052

Available direct from Shockcraft or via your local bike shop

Learn More

Manitou's legendary 26" single-crown jump fork
Travel 100 mm (internally adjustable to 80 mm) or 130 mm (internally adjustable to 120-140 mm)
20 x 110 mm Hex axle
ACT coil spring with air preload system
ABS+ damper with Jump Stack tune
1 1/8" straight or 1.5" tapered steerer
Gloss Black or Gloss White

The Manitou Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.

The Circus has a firm coil spring with air preload and a firm valved ABS+ compression damper to take the impact out of hard landings.  The 20 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

Available for order now.  If not in stock please contact us and we can advise ETA.

Photos show 1 1/8" straight steerer version.  Also available in 1.5" tapered steerer. Learn More

Single crown air spring fork for jump and slopestyle
This fork won the 2019 Fox US Open Clif Slopestyle under GT's David Leib
Travel 100 mm (internally adjustable to 80 mm) or 130 mm (internally adjustable 100-140 mm)
15 x 100 mm Hexlock SL tooled axle
Dorado Air spring tuned for jumping
IVA Incremental Volume Air spacer system
ABS+ damper with Jump Stack tune & hydraulic bottom out (HBO)
1.5" tapered aluminium steerer
Matte Black

Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.  The Circus Pro adds a lighter and stiffer 34 mm air spring chassis from the Mattoc to the Circus range.

The Circus Pro is Manitou's new Dirt Jump & Slope Style fork.  Based on the 34 mm Mattoc chassis it is strong, stiff and light, with a fully tunable air spring and ABS+ compression damper to take the impact out of hard landings.  The 15 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

Available for order now.  If not in stock please contact us and we can advise ETA. Learn More

The JUnit Machete is a high performance suspension fork for 20" and 24" wheeled bikes, bringing performance, speed and safety to younger riders.

Both fork sizes have air springs and dampers tuned for lightweight riders with infinitely tunable air springs and fully revalvable ABS+ dampers.

Available for order now.  If not in stock please contact us and we can advise ETA.

1.5" headset lower cup assembly available to adapt Scott Roxter, Trek Roscoe, Avanti Montari and other bikes to fit the tapered steerer of the Manitou JUnit Machete.

Learn More

The 2021 Machete Comp is a rock solid 32mm fork built on the same platform as the new R7 Expert and Pro.  Strong enough for 150kg E-bikes and Cargo-Bikes this fork provides performance, reliability and long service intervals for XC, Trail, Adventure and E-bike riders.

27" 120 mm Manitou Machete Comp
Boost 15 x 110 mm thru axle
TS Air spring with negative coil & internally adjustable volume.
Kwik Toggle compression damper with lockout
1.5" tapered steerer. Learn More

The 2021 Machete Comp is a rock solid 32mm fork built on the same platform as the new R7 Expert and Pro.  Strong enough for 150kg E-bikes and Cargo-Bikes this fork provides performance, reliability and long service intervals for XC, Trail, Adventure and E-bike riders.

27+ & 29" 120 mm Manitou Machete Comp
Boost 15 x 110 mm thru axle
TS Air spring with negative coil & internally adjustable volume.
Kwik Toggle compression damper with lockout
1.5" tapered steerer. Learn More

Enduro tech, revised for XC

Designed for the riders that dabble in everything, the Mara is ready for anything.
Manitou's IPA damper features four different positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out double track sprints.
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable.

This is the metric eyelet version of the Manitou Mara (Inline).

Available for order now.

Learn More

Enduro tech, revised for XC

Designed for the riders that dabble in everything, the Mara is ready for anything.
Manitou's IPA damper features four different positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out double track sprints.
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable.

This is the metric trunnion version of the Manitou Mara (Inline).

Available for order now.

Learn More

The Mara Pro is Manitou's new piggy back heavy duty air shock
Imperial eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable

Manitou Part Codes: 192-36851-A015 to 192-36851-A017

Learn More

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.

Manitou Part Codes: 192-36851-A021 to 192-36851-A026

Learn More

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric trunnion version (trunnion top, eyelet bottom)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable

Manitou Part Codes: 192-36852-A013 to 192-36852-A020

Learn More

The Manitou Mezzer is the big single crown fork everyone has been waiting for - an entirely new fork delivering class beating stiffness, weight and performance.
37 mm chassis, 180 mm travel and 27 or 29" wheel sizes.

Available for order now.  If not in stock please contact us and we can advise ETA.

We also have Mezzers available for demo.  Details and booking are available here.

Available direct from Shockcraft or via your local bike shop

Learn More

Rebirth of an Icon

The Manitou R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 Expert pairs superior damping thanks to Manitou's 3 position dual piston VTT damper with a lightweight and stiff 32 mm chassis. Learn More

Manitou Mastodon Pro EXT (Extended) Fat Fork
Special version to allow 80-150 mm travel with maximum tyre size (26 x 5.25")
Can be configured for 80-170mm with smaller tyres (26x4.5).
Ideal for Foes Mutz Full Suspension Fat Bike
15 x 150 mm Hexlock SL axle
Dorado Air spring system
IVA air volume spacer system
MC² Damper with HSC, LSC and rebound adjustable
1.5" Taper Steerer (also available with 1 1/8" straight steerer here)
180 mm Disc Brake Mounts (Post)
Tested to perform at -15°C
2260g with uncut steerer

The Mastodon is a game changer for the Fat Bike market. Engineered for and tested to work in the extreme cold as well as the warm. Strong and stiff 34 mm chassis developed from the Manitou Mattoc provides class leading damping, adjustability and now cold weather performance.

The MC² damper and Dorado Air spring system are proven performers with amazing external adjustability and internal tunability.

Available from Shockcraft or via your local bike shop

Learn More

Special size Manitou Mara Pro Air shock with custom shock pin to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion lower pin and Manitou Mara Pro piggy back shock.
Choose travel from 230 x 60 mm (stock Mara), 230 x 57.5 mm (stock trek ) to 230x65mm if you have clearance to do so.

Resulting combination bolts straight in

Learn More