Legends Never Die

Back in a big way, the all-new Dorado Pro is ready to turn the suspension world upside down.
Featuring an inverted design, carbon upper structure, 37 mm stanchions, and refreshed internals, the new Dorado Pro is the pinnacle of suspension technology.
The new stiffer chassis is paired with an all-new sealed version of Manitou's TPC+ damper and improved Dorado Air Spring with IRT volume adjuster.
These technologies combined into one ultimate platform provides more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease. Learn More

Coil Fans Rejoice!

Once again, the Dorado is available with a coil option.  The new Dorado Comp features the same 37 mm chassis as the Expert, but with a more set it and forget it vibe.
The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle.  On the damping side of things Manitou's ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability.  The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Learn More

Get Inverted

Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide.
Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered.
Featuring an all new 37 mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the new Dorado is your ticket to the best ride you’ve ever had. Learn More

Soft coil spring for Dorado Comp 37 mm 2022
30 lb/in
Green stripe

Manitou Part Code: 141-38380-K026

Note: photo representative only Learn More

Firm coil spring for Dorado Comp 37 mm 2022
40 lb/in
Red stripe

Manitou Part Code: 141-38380-K030

Note: photo representative only Learn More

Extra firm coil spring for Dorado Comp 37 mm 2022
45 lb/in
Yellow stripe

Manitou Part Code: 141-38380-K031

Note: photo representative only Learn More

Extra extra firm coil spring for Dorado Comp 37 mm 2022
52 lb/in
Black stripe

Manitou Part Code: 141-38380-K032

Note: photo representative only Learn More

Dorado Pro/Expert Cartridge Damper TPC+
Fits all 36mm Dorado 2009-2021
Can be tuned by Shockcraft

Manitou Part Code: 141-24104

Learn More

Rockeater Tune for Manitou Dorado Pro/Expert 37 mm 2022 and later forks
This is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  Just send us either your fork or damper.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Custom Tune
If you want the full experience of the Custom Tune for the Dorado 37 mm we still do these too.  Information and pricing for the Dorado 37 mm 2022+ Custom Tune is here.

Pricing
Send in either your whole fork or damper only
Rockeater Tune pricing includes labour for tuning & service (damper only or whole fork), modifications (machining of 3 pistons) and consumables, with optional wiper seals
Excludes repairs, repair parts and optional upgrades
Optional upgrades and spare parts shown
Service Pricing only (i.e. without tuning/modifications) is here Learn More

Learn More

Replacement lower leg guards to fit Dorado forks 2009 onwards Manitou Part Number: 141-28073-K003 Learn More

Dorado sag & hose guide with screws kit.
Suitable for all 37mm Dorado 2022 onwards.

Manitou Part Code: 141-38380-K043 Learn More

Bolt kit for Manitou Dorado 2022 (37mm)

Manitou Part Code: 141-36521 Learn More

Dorado 37 mm Upper Crown, Tall (drop type) Long Offset (Manitou)
Fits Manitou Dorado 37mm Comp, Expert & Pro
Must match to long offset lower crown

Manitou Part Code:  141-38380-K004 Learn More

Application: Manitou DORADO forks 2022+ 37 mm
Kit includes o-rings & quad rings for TPC+ damper, Dorado Air Spring, IRT Air Spring O-rings and a travel check o-ring

PDF showing contents of kit is available here Learn More

Kit includes 2 Trelleborg flangeless wiper seals, 2 foam rings and 2 wire clips.
Fits 37 mm stanchioned Manitou Dorado 2022 and Mezzer forks.

Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals.
A seal press tool is not essential for installation of the flanged seals but it does make the job easier.


Manitou Part Code: 141-38380-K019 Learn More

Dorado 37 mm Lower Crown Steerer/Assembly, Long Offset (Manitou) Learn More

Dorado 37 mm Mud-guard, Crown, Drop Out Bolt Kit (Manitou)

Manitou Part Code: 141-38380-K028 Learn More

Purchase a new Dorado Pro 37 mm 2022+ damper with Shockcraft Rockeater Tune to upgrade your Dorado Pro 37 mm fork

The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Pricing & Availability
This product is a new Manitou Dorado Pro 37 mm 2022+ damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

Damper Manitou Part Code: 141-38380-K021

Want your existing Dorado damper tuned?
You can also send us your existing Dorado Pro 37 mm damper or fork for tuning.  We have both Custom Tune & Rockeater Tune options. Learn More

Service pricing for Manitou Dorado 37 mm 2022 & later forks
Includes labour, consumables, wiper seals and fluids
Excludes repairs & repair parts

See Related Products for tuning options Learn More

Custom Tuning for Manitou Dorado 37 mm 2022 & later forks or fork dampers
With the Custom Tune we use our Fortune Teller to calculate your tuning targets using rider weight, terrain, bike geometry and riding style
These are combined with our damper modifications to give unrivalled comfort, control, traction and speed
Custom tuning Includes our Unharsh Modifications, with machining of three pistons in the Dorado 37 mm damper, dyno testing, damper final settings and air pressure recommendations

Rockeater Tune
We also have our Rockeater Tune for the Dorado 37 mm, info here

Pricing
Send in either your whole fork or damper only
Custom Tune pricing includes labour for tuning & service (damper only or whole fork), modifications (machining of 3 pistons) and consumables, with optional wiper seals
Excludes repairs, repair parts and optional upgrades
Optional upgrades and spare parts shown
Service Pricing only (i.e. without tuning/modifications) is here Learn More