All Manitou

Stanchion End Cap 068161
For 30 mm Black, R7, M30 etc
Black plastic  29.7 mm OD, 20 mm tall
1.125" 18 TPI upper thread
22 mm lower external hex
Manitou Part Code: 068161

Learn More

ID: 12 mm, OD: 14 mm, W: 12.5 mm Manitou Part Code: 85-6105 Learn More

Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 10 mm damper shafts
Manitou Part Code: 121-32318

note photo is of 12.7mm shaft version: 121-30396

Learn More

A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Magnum, Machete, Mattoc, Minute or Marvel QR15 forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K001 Learn More

QR 15 mm Hex Lock Through Axle to fit all 15 mm x 100 mm Manitou forks, including Minute, Marvel & Mattoc Manitou Part Code: 141-28131-K016 Learn More

A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Mattoc, Magnum & Machete QR15 Boost forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K002

Learn More

QR15 hex-lock axle Fits 110 mm wide hubs on Mattoc, Magnum & Machete Boost forks Manitou Part Code: 141-32155-K011

Learn More

2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks 

Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 21.8 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K003 Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
21.8 mm total width 8 mm bolt hole
Two piece top-hat design
Manitou Part Code: 142-27125-K003 Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 22.2 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K005 Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 30 mm total width 8 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27125-K024 Learn More

Replacement bolt and fitting kit for all Manitou 20 mm hex axle forks Manitou Part Code: 141-23996 Learn More

20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070

Learn More

20 mm Hex-lock through axle for 2006+ Manitou Travis
Also fits 2008+ Minute/Drake/Circus 2009+ Dorado
Interchangable with 141-23995
Hex measures 21.7 mm A/F non-disc side and 18.3 mm A/F disc side
Black Colour
Manitou Part Code: 83-2966

Learn More

20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009+
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Silver Colour with Black cap.
Manitou Part Code: 141-23995

Learn More

Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks

Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 40 mm total width 8 mm bolt hole Three piece pin and collar design Manitou Part Code: 142-27125-K047 Learn More

Fits Manitou Black, R7, M30 & Markhor air forks with 30 mm stanchions
Thread M26.5 x 1.0 mm
Manitou Part Code: 83-2654
Supersedes 85-5803

Learn More

Bushing set for replacement/repair of 30 mm Manitou forks
Fits Black, Minute (2004-05), R7, M30 & Markhor forks
Requires specialist tools to install and size
Manitou Part Code: 85-5321

Learn More

Air top cap to fit Manitou 32 mm forks 2008 onwards
Fits & works with ACT coil & air spring system, ISO air, TS air, MARS air etc.
M30 x 1.0 mm thread
Includes schrader valve & cap
Supercedes with direct fit Manitou part codes 83-3150 & 141-23992-K002

Manitou Part Code: 141-27988-K013

Learn More

Replacement lower leg bushings for all Manitou 32 mm forks Manitou Part Number: 141-27181-K007 Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26" 32 mm stanchions Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008 Compatible with 1.5" steerer due to brace being furthur from the crown 20 x 110 mm through axle (axle not included) Seals and bushings installed 74 mm 160 mm disc mount 8 mm spring side bolt Gloss Black colour Manitou Part Code 141-23994-K025 Learn More