Stanchion End Cap 068161
For 30 mm Black, R7, M30 etc
Black plastic  29.7 mm OD, 20 mm tall
1.125" 18 TPI upper thread
22 mm lower external hex
Manitou Part Code: 068161

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 10 mm damper shafts
Manitou Part Code: 121-32318

note photo is of 12.7mm shaft version: 121-30396

Learn More

Replacement bolt and fitting kit for all Manitou 20 mm hex axle forks Manitou Part Code: 141-23996 Learn More

20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070

Learn More

20 mm Hex-lock through axle for 2006+ Manitou Travis
Also fits 2008+ Minute/Drake/Circus 2009+ Dorado
Interchangable with 141-23995
Hex measures 21.7 mm A/F non-disc side and 18.3 mm A/F disc side
Black Colour
Manitou Part Code: 83-2966

Learn More

Fits Manitou Black, R7, M30 & Markhor air forks with 30 mm stanchions
Thread M26.5 x 1.0 mm
Manitou Part Code: 83-2654
Supersedes 85-5803

Learn More

Bushing set for replacement/repair of 30 mm Manitou forks
Fits Black, Minute (2004-05), R7, M30 & Markhor forks
Requires specialist tools to install and size
Manitou Part Code: 85-5321

Learn More

Air top cap to fit Manitou 32 mm forks 2008 onwards
New-Old-Stock
Fits & works with ACT coil & air spring system, ISO air, TS air, MARS air etc.
M30 x 1.0 mm thread
Includes schrader valve & cap
Supercedeed with direct fit Manitou part codes 141-27988-K013 & 141-23992-K002

Manitou Part Code:  83-3150

Learn More

Replacement lower leg bushings for all Manitou 32 mm forks Manitou Part Number: 141-27181-K007 Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26" 32 mm stanchions Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008 Compatible with 1.5" steerer due to brace being furthur from the crown 20 x 110 mm through axle (axle not included) Seals and bushings installed 74 mm 160 mm disc mount 8 mm spring side bolt Gloss Black colour Manitou Part Code 141-23994-K025 Learn More

Manitou 32mm 26" lower leg casting
Quick release 100x9mm axle type. Non Boost
Black with 160mm disc mount (74mm post type)
Fit Minute 2008+, Marvel, Circus Sport/Comp/Expert 2011+, Machete etc.

Manitou Part Code: 141-27988-K018 Learn More

Air top cap to fit Manitou Nixon 2005, Minute 2006 & Sherman 2005 forks
New-Old-Stock
1.125 x 18 TPI inperial threads
Includes schrader valve & cap

Manitou Part Code:  83-2449

Learn More

Spring top cap to fit Manitou Nixon 2005, Minute 2006 & Sherman forks
New-Old-Stock
1.125 x 18 TPI imperial threads
Includes spring top pedestal

Manitou Part Code:  83-2450

Learn More

Fits Manitou Sherman & some Nixon forks Thread 1.125" x 18 TPI Manitou Part Code: 85-5924 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

T-section seal & two backup rings
Fits 32mm fork air pistons with TS Air or ISO Air pistons.
Approx 28mm stanchion ID.

Manitou Part Code: 141-28131-K022

Learn More

Minute 2008 Coil or TS Air Crown Steerer Assembly (CSA/CSU)
Steerer: 1.125" Straight, Aluminium Black
Travel: 100 mm
Stanchions: 32 mm, Gold Anodised Aluminium, 301 mm Length (from top of crown)
Crown: Polished Silver
New Old Stock (NOS)
Manitou Part Number: 83-3152

Learn More

Minute CSA/CSU for coil, TS Air or ISO Air.
Steerer: 1.125" Straight, Aluminium Black
Travel: 120 mm max
Stanchions: 32 mm, Gold Anodised Aluminium, 320 mm Length (from top of crown)
Crown: Polished Silver
New Old Stock (NOS)
Manitou Part Number: 83-3153

Learn More

Machete CSA Boost 27.5+/29" 130-140 1.5T MB (Manitou)
Boost 32mm tubes 340  mm long with M30x1.0 threads top and bottom.
Comp level with 6000 series tapered stanchions and hollow crown
1.5" tapered steerer and all black

Manitou Part Code: 141-33396-K002 Learn More

Machete CSA Boost 27.5+/29" 90-120 1.5T MB (Manitou)
Boost 32mm tubes 320 mm long with M30x1.0 threads top and bottom.
Comp level with 6000 series tapered stanchions and hollow crown
1.5" tapered steerer and all black

Manitou Part Code: 141-33396-K001

Learn More

Minute CSA Expert 130/140 AST Matte Black (Manitou)
Non Boost 32mm tubes 340 mm long with M30x1.0 threads top and bottom.
Expert level with 7000 series straight wall stanchions and hollow forged crown
1.12.5" straight steerer with gold stanchions and black crown

Manitou Part Code: 141-30658-K001 Learn More

Circus CSA Expert 26 80/100 AST Gloss Black (Manitou)
Non Boost 32mm tubes 300 mm long with M30x1.0 threads top and bottom.
Expert level with 7000 series straight wall stanchions and hollow forged crown
1.12.5" straight steerer and all black with gloss crown

Manitou Part Code: 141-27220-K019 Learn More