Damper Parts

Shockcraft's internal seal kit for 28.6 mm Manitou SX & Mars forks Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Black & Minute forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Xvert forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Splice forks Learn More

Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks Learn More

Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks This kit contains additional orings for the volume adjuster in SPV forks. Learn More

Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More

ABS+ damper kit for Manitou 32mm forks from 2008 to current.
Fully revalvable and tuneable compression damper assembly.
Red piston is 28mm OD (excluding oring) and fits the majority of Minute, Marvel, Machete and Circus forks.
Top cap threads M30x1mm
Manitou Part Code: 141-26532-K002

Learn More

ABS+ damper kit for Manitou 32 mm jump forks
Red piston is 28mm OD (excluding oring) and fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Jump tune features a lot of compression damping.
Manitou Part Code: 141-26532-K007 Learn More

ABS+ damper kit for for Minute Pro and other Manitou 32 mm forks Manitou Part Code: 141-26532-K013 Learn More

ABS+ compression damper kit for Manitou R7 forks from 2006 & some Black forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.
Manitou Part Code: 141-26532-K001

Learn More

Fluid Flow compression damper assembly for Axel & Trace Forks
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 25 mm
Cap threads M26 x 1.0 mm
Manitou Part Code: 85-5253

Learn More

Axel/Trace Rebound damper assembly 80-120 mm
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 25 mm diameter
End cap threads 26.5 x 1 mm
Manitou Part Code: 85-5255

Learn More

Axel/Trace Rebound damper assembly 80-120 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 25 mm diameter
End cap threads 26.5 x 1 mm
Manitou Part Code: 85-5254

Adjustable version is 85-5255

Learn More

Lockout compression damper assembly for Black & Skareb Forks
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 25.4 mm
Cap threads M26 x 1.0 mm
Manitou Part Code: 85-5299

Learn More

Lockout compression damper assembly for Black Forks
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 24.3 mm
Cap threads M26.5 x 1.0 mm
Manitou Part Code: 85-5868

Learn More

Manitou Black SPV damper shaft assembly 80-120 mm
227 mm overall length, 163 mm steel tube, 24.6 mm piston
0685159 End-Cap with 1.125 x 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5869

Learn More

Manitou Black TPC rebound assembly 80-120 mm
198 mm overall length, 163 mm steel tube, 24 mm piston
068159 End-Cap with 1.125" 18 TPI thread
New Old Stock (NOS)
Manitou Part Code: 85-5306

Shaft can be used in other 80-120 mm forks by changing end-cap and piston with existing.

Learn More

Manitou Black TPC rebound assembly 80-120 mm Non-Adjustable
198 mm overall length, 163 mm steel tube, 24 mm piston
068159 End-Cap with 1.125" 18 TPI thread
New Old Stock (NOS)
Manitou Part Code: 85-5556

Photo is of 83-5306 which is dimensionally identical but features adjustable rebound

Learn More

Rebound damper shaft, piston & end cap assembly for all Dorado forks from 2009 onwards Fits 26" and 27" wheel sizes Manitou Part Number: 141-24102 Learn More

Dorado MRD 2004-05 SPV damper shaft assembly
410 mm overall length, 275 mm steel tube, 27.5 mm piston
Aluminium End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5931

Learn More

Fluid Flow compression damper assembly for Gold Label Forks
Will also fit Sherman, 2005/6 Nixon and 2006 Minute
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 27 mm
Cap threads 1.125" x 18 TPI
Manitou Part Code: 83-2808

Learn More

Shockcraft modified High Flow piston (rebound & mid valve) for Pro level forks with cartridge rebound
Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
Blue aluminium with PTFE glide-ring 16 mm OD
Part Code: 126-27209HF

Exchange high flow pistons also available

Learn More

Rebound damper assembly for Mattoc/Magnum Comp 27+/29" forks, 80-140 mm travel with ABS+ compression damper
Includes rebound damper, rebound knob and two pedestals for 80/100 mm and 120/140 mm configurations
Manitou Part Code: 141-32156-K017

Learn More