Fork Small Parts

Set Descending Direction

14 Item(s)

  1. Travel spacer for Manitou forks
    C-clip design
    10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
    Fits 10 mm shafts
    Manitou Part Code: 121-29113

    Learn More
  2. Travel spacer for Manitou forks
    C-clip design
    10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
    Fits 12.7 mm shafts
    Manitou Part Code: 121-30396

    Learn More
  3. Travel spacer for Manitou forks
    C-clip design
    10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
    Fits 10 mm damper shafts
    Manitou Part Code: 121-32318

    note photo is of 12.7mm shaft version: 121-30396

    Learn More
  4. Mattoc/Magnum HBO check spring
    Spare part for loss repair.  Located behind HBO cup on compression assembly.
    7mm long, 4.2mm OD.

    Manitou Part Code: 06-30829

    Learn More
  5. Mattoc/Magnum HBO knob detent spring
    Spare part for loss repair.  Located inside HBO knob on top of compression assembly.
    3.8mm long, 2mm OD
    Sold individually, 2 used in each knob.

    Manitou Part Code: 06-29643

    Learn More
  6. Mattoc/Magnum Pro MC2 compression damper HBO Cup
    Spare part for repair or upgrading Mattoc Expert to Mattoc Pro damper
    Pro HBO cup is smaller diameter than Expert version and must be used only with matching HBO cone.

    Manitou Part Code: 126-30377

    Learn More
  7. Piston Band glide ring for Dorado 2009-2018
    Blue turcite
    16 mm OD
    2.8 mm tall
    Manitou Part Code: 072334

    Piston not included (Manitou Part Code: 072331-F002)

    Learn More
  8. Piston Band glide ring for all Pro Cartridge rebound forks
    White PTFE 16 mm OD, 2.8 mm tall
    Manitou Part Code: 129-27542-L150

    Piston not included (Manitou Part Code: 126-27209)

    Learn More
  9. Rebound Piston for all Pro Cartridge rebound forks
    Blue aluminium 14.3 mm OD, 7 mm tall
    18 holes
    Manitou Part Code: 126-27209

    PTFE Glide Ring not included (Manitou Part Code: 129-27542-L150)

    Shockcraft modified High Flow pistons (rebound & mid valve) are also available
    Thie High Flow pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run

    Learn More
  10. Shaft foot for Air Shaft in forks with Dorado Air system
    Black aluminium 17 mm OD, 35 mm tall
    M8 x 1.0 upper thread with slotted side
    M12 x 1.5 lower thread with 8 mm external hex & schrader thread
    Manitou Part Code: 121-27478

    Learn More
  11. Shaft foot for rebound damper in 34 mm Comp & Expert forks
    Fits Magnum/Mattoc/Mastodon etc 34 mm forks with 12.7 mm aluminium rebound shaft
    Black aluminium 19 mm OD, 31 mm tall
    M10 x 1.25 upper thread
    M12 x 1.5 lower thread with 8 mm internal hex
    Manitou Part Code: 125-29191

    Learn More
  12. Shaft foot for rebound damper in Pro forks
    Fits Minute/Machete/Magnum/Mattoc/Mastodon etc forks with 10 mm aluminium rebound shaft
    Black aluminium 19 mm OD, 26 mm tall
    M8 x 0.5 upper thread
    M12 x 1.5 lower thread with 8 mm internal hex
    Manitou Part Code: 125-30786

    Learn More
  13. Spirawave spring for Dorado 2009-2018
    9.2 mm ID, 10.4 mm OD, 3.3 mm tall
    Manitou Part Code: 072344

    Learn More
  14. Trelleborg foot seal for Manitou fork rebound shafts 2008 & later
    Also used on air shafts on forks 2014 & later
    11 mm ID, 17 mm OD, 2 mm W
    Sold individually
    Manitou Part Code: 141-23987

    Learn More

Set Descending Direction

14 Item(s)