Pistons

Set Descending Direction

14 Item(s)

  1. Replacement air piston for Manitou Black/Skareb forks One piece, over-moulded part Approximately 24.8 mm OD New Old Stock (NOS) Manitou Part Code: 85-5266 Learn More
  2. Shockcraft modified High Flow piston (rebound & mid valve) for Pro level forks with cartridge rebound
    Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
    This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
    Blue aluminium with PTFE glide-ring 16 mm OD
    Part Code: 126-27209HF

    Exchange high flow pistons also available

    Learn More
  3. Machete & Marvel ISO air piston
    28.2 mm OD, 18 mm tall
    M6 threaded puller hole on top
    Orange anodised
    Use with ISO compression rod (domed top) only
    Manitou Part Code: 141-28131-K015
    Replacement seal: 141-28131-K022

    Learn More
  4. 31 mm piston assembly with seal and Slickoleum assembly grease
    Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
    Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
    Manitou Part Code: 141-30996-K023

    Learn More
  5. 29 mm piston assembly with seal and glide-rings
    Replacement air piston for Manitou Mattoc Comp & Magnum Comp (2015-17) & Mastodon Comp forks with Dorado Air spring system (valve underneath by axle)
    Upgrade air piston for 2014 Mattoc Comp & Magnum Comp forks which had the piston with the single white glide-ring
    Manitou Part Code: 126-27479-L001

    Learn More
  6. Minute/Tower Pro MARS air piston
    27 mm OD, 18.5 mm tall
    M6 threaded puller hole on top
    Blue anodised
    Manitou Part Code: 141-30416-K023
    Replacement Seal: 141-28131-K023
    Supersedes 141-25698

    Learn More
  7. 2007 Minute/Marvel Comp TS air piston
    28 mm OD, 13.5 mm tall
    13mm recess for TS Air shaft.
    Gold or Blue anodised
    Manitou part code: 83-3188
    Replacement seal: 141-28131-K022

    Learn More
  8. Minute/Marvel Comp TS air piston
    28 mm OD, 16.5 mm tall
    M6 threaded puller hole on top
    Gold anodised
    Manitou part code: 141-27988-K012
    Replacement seal: 141-28131-K022

    Learn More
  9. Replacement piston for Manitou Minute/Tower forks with MARS air coil system
    27.1 mm OD (measured across blue glide ring)
    Manitou Part Code: 141-25698

    Replacement T-seal for this piston is available here.

    Learn More
  10. Piston Band glide ring for Dorado 2009-2018
    Blue turcite
    16 mm OD
    2.8 mm tall
    Manitou Part Code: 072334

    Piston not included (Manitou Part Code: 072331-F002)

    Learn More
  11. Piston Band glide ring for all Pro Cartridge rebound forks
    White PTFE 16 mm OD, 2.8 mm tall
    Manitou Part Code: 129-27542-L150

    Piston not included (Manitou Part Code: 126-27209)

    Learn More
  12. Rebound Piston for Dorado 2009-2018
    Blue aluminium 15 mm OD, 8.8 mm tall
    12 holes
    Manitou Part Code: 072331-F002

    Turcite Glide Ring not included (Manitou Part Code: 072334)

    Learn More
  13. Rebound Piston for all Pro Cartridge rebound forks
    Blue aluminium 14.3 mm OD, 7 mm tall
    18 holes
    Manitou Part Code: 126-27209

    PTFE Glide Ring not included (Manitou Part Code: 129-27542-L150)

    Shockcraft modified High Flow pistons (rebound & mid valve) are also available
    Thie High Flow pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run

    Learn More
  14. Fits Manitou R7, M30 and Markhor forks with TS-Air air spring system
    25.0 mm diameter (across blue glide-ring).
    11.3 mm total height
    Manitou Part Code: 83-2669

    Note that due to continuous product development the piston you get may look different to your existing piston, but it will fit and work

    Learn More

Set Descending Direction

14 Item(s)