Manitou Mattoc Pro 2018 27" 170 mm Matte Red Demo fork
Fits officially 27x2.6" tyres (unofficially many people are running 2.8")
1.5" tapered steerer
15 x 110 mm Boost front axle with single tool removal (6 mm hex key)
180 mm post mount brake fitting
MC^2 damper with HSC, LSC, LSR and HBO
IRT dual positive chamber air spring with self balancing negative
Bolt on rear facing mud-guard

This fork is in stock configuration and has had very little use.
Standard damper but with sealing upgrades
Motorex 2.5wt damper oil.
Set to deliver 160 mm travel
Bath oil is Supergliss (summer) or Polar Lube Oil (winter)

Learn More

Manitou Mara Shock Metric Trunnion 230 x 60 mm

Trunnion shock specifically for Trek Slash and Remedy to replace Reaktiv.
High mounted piggy back gives required downtube clearance on these bikes.
Air spring with internally adjustable volume
Damper has HSC/LSC, rebound and work-party switch
High performance piggy back design with low friction and high heat capacity.
Can be shortened in stroke as required

Use Shockcraft Deaktiv lower pin (50mm) for a bolt in replacement of Trek Reactiv shocks.

Manitou Part Code: 192-36852-A009 Learn More

Manitou Mara (Inline) Shock Metric Eyelet 190 x 40 mm
Can be extended to 45mm stroke or reduced as much as desired.
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro.
IPA damper gives 4 compression settings from open to firm.
Single can standard, high volume king can available.

Manitou Part Code: 192-37260-A003

Learn More

Manitou Mara (Inline) Shock Metric Eyelet 210 x 50 mm
Can be extended to 55mm stroke or reduced as much as desired.
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro.
IPA damper gives 4 compression settings from open to firm.
Single can standard, high volume king can available.

Manitou Part Code: 192-37260-A005 Learn More

Manitou Mara (Inline) Shock Metric Eyelet 230 x 60 mm
Can be extended to 65mm stroke or reduced as much as desired.
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro.
IPA damper gives 4 compression settings from open to firm.
Single can standard, high volume king can available.

Manitou Part Code: 192-37260-A007 Learn More

Manitou Mara Pro Shock Metric Eyelet 210 x 50-55 mm

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust, High Speed Compression (HSC) adjust, Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.
Dual layer "King Can" air can with selectable volume.
Boxed as 210x50mm, internal spacer can be removed for 210x55mm or added to reduce stroke.

Manitou Part Code: 192-36851-A021

Learn More

We have three lightly used Manitou Mezzer forks to clear-out, one each of:
•   27.5" wheel size, 37 mm offset.
•   27+/29" wheel size, 44 mm offset
•   27+/29" wheel size, 51 mm offset

All can be set from 140 to 180 mm travel (set with internal spacers)
All very well maintained and freshly serviced
Note photos are of new forks, not the ex-demo forks for sale here

The Manitou Mezzer is the big single crown fork everyone has been waiting for - an entirely new fork delivering class beating stiffness, weight and performance.
37 mm chassis, 180 mm travel and 27 or 29" wheel sizes.

Learn More

Custom Built Manitou 32 mm Minute forks.
29" wheel 120 mm travel
20 x 110 mm thru axle
MARS air/coil spring
TPC lockout damper
1 1/8" aluminium steerer
PM160 brake mount.
1900 g

Can be further customised.

Available direct from Shockcraft or via your local bike shop

Learn More

2018 Manitou Jack dropper post
30.9 or 31.6 mm diameter
125 or 150 mm stroke
Air-backed hydraulic cartridge design
Cable actuated with 2X compatible lever & cable included
Internal cable routing only (inside seat tube)
Bike can be lifted by a lowered seat without sucking in air thereby avoiding expensive rebuilds

Get Jacked with the set-and-forget dropper seat post.  Collaboration between Answer and Manitou engineers has merged a strong, lightweight shell with a durable hydraulic cartridge and easy setup.

Available direct from Shockcraft or via your local bike shop

Learn More

Manitou's trail and Enduro air shock
This shock delivers class leading traction and stability both uphill and down
4 stages of on-the-fly IPA (incremental pedalling assist) damping adjustment and seamless rebound adjustment
200 mm eyelet to eyelet measurement
56 mm stroke
King Can multi volume air cans available

Learn More

Customised Manitou McLeod 200 x 56mm version
Custom is grey stealth graphics and hardware
Pre-installed 8x22.2mm 2 piece hardware in each end
200 mm eyelet to eyelet measurement
56 mm stroke
King Can multi volume air cans available

Learn More

26" 203 mm Manitou Travis DC CID forks in grey 20 mm hex axle Coil spring Cartridge Intrinsic Damper (CID), air version Dual Crown 1 1/8" aluminium steerer Direct mount upper crown (integrated 45/70 mm stem for 31.8 mm handlebars) Made in USA New Old Stock (NOS) Manitou Part Number: 85-21772 Learn More