Forks

The full range of Manitou forks is available from Shockcraft.  We also have new old stock of Manitou R7, Jumper, Travis & Minute forks and can custom build forks to fit difficult combinations of wheel size, steerer size & axle size.

2018 Manitou Fork Range

For 2018, Manitou has revised the suspension offering, making it easier than ever to choose the right suspension for your ride.  Ranging from 36 mm to 30 mm stanchions, 80 mm to 203 mm travel and precision adjustability, Manitou is everything you asked for and more than you expect.

Manitou 2018 Fork Range

Set Descending Direction

25 Item(s)

  1. Custom built forks based on the Manitou 32 mm chassis to fit difficult combinations of wheel size, steerer size, axle size Available with coil or air springs Various travel options Learn More
  2. 27" 180-203 mm Manitou Dorado Pro
    20 mm hex axle
    Dorado Air spring system
    TPC+ Cartridge Damper
    Dual Crown 1 1/8" aluminium steerer

    The legendary World Cup downhill and big mountain fork, now with standard Incremental Volume Adjust (IVA) and Trail Side Relief (TSR) pressure release. Welcome to glory!


    The Dorado Pro is an engineering masterpiece. 7050 legs, inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20 mm thru-axle add up to the most advanced downhill fork ever.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  3. 26" 100 mm Manitou Circus Expert forks
    Adjustable 80-100 mm with internal spacers
    20 x 110 mm Hex axle
    ACT coil spring with air preload system
    ABS+ damper with Jump Stack tune
    1 1/8" aluminium steerer

    The Circus, Manitou's short and stout Jump fork, has a firm coil spring with air preload and a firm valved ABS+ compression damper to take the impact out of hard landings.

    The 20 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  4. 27" 180-203 mm Manitou Dorado Expert
    20 mm hex axle
    Dorado Air spring system
    TPC+ Cartridge Damper
    Dual Crown 1 1/8" aluminium steerer

    The legendary World Cup downhill and big mountain fork, now with standard Incremental Volume Adjust (IVA) and Trail Side Relief (TSR) pressure release. Welcome to glory!

    The Dorado's inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20mm thru-axle add up to the most advanced downhill fork ever. The Dorado Expert has the same specifications as the Dorado Pro, except with Aluminium legs instead of the Pro's stiffer and stronger 7050 Aluminium.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  5. 2018 Manitou Mattoc Pro forks
    27" 160 mm

    15 x 100 mm Hexlock SL tooled axle
    DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
    MC2 Cartridge Damper with external HSC & LSC rebound & HBO adjusters
    1.5" tapered steerer
    Internally convertible to 26" and 170 mm travel
    Available in matte red or matte black

    Available direct from Shockcraft or via your local bike shop

    Learn More
  6. 2018 Manitou Mattoc Pro Boost forks
    27+/29" 140 mm

    15 x 110 mm Hexlock SL tooled axle
    DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
    MC2 Cartridge Damper with external HSC & LSC rebound & HBO adjusters
    1.5" tapered steerer
    Travel Internally reducable in 10 mm increments
    Available in matte black

    Available direct from Shockcraft or via your local bike shop

    Learn More
  7. 2018 Manitou Mattoc Pro Boost forks
    27" 160 mm

    15 x 110 mm Hexlock SL tooled axle
    DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
    MC2 Cartridge Damper with external HSC & LSC rebound & HBO adjusters
    1.5" tapered steerer
    Internally convertible to 26" and 170 mm travel
    Available in matte red or matte black

    Available direct from Shockcraft or via your local bike shop

    Learn More
  8. 2018 Manitou Mattoc Pro Boost forks
    29+ 120 mm

    15 x 110 mm Hexlock SL tooled axle
    DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
    MC2 Cartridge Damper with external HSC & LSC rebound & HBO adjusters
    1.5" tapered steerer
    Travel Internally reducable in 10 mm increments
    Available in matte black

    Available direct from Shockcraft or via your local bike shop

    Learn More
  9. Mastodon Pro (Manitou)

    $1,310.00

    Order Now

    26-27" 80-140mm Manitou Mastodon Pro Fat Fork
    15 x 150 mm Hexlock SL axle
    Dorado Air spring system
    IVA air volume spacer system
    MC2 Damper with HSC, LSC and rebound adjustable
    1.5" Taper Steerer (Optional 1 1/8" aluminium steerer)
    Standard or Extended height (+20mm) available
    180 mm Disc Brake Mounts (Post)
    Tested to perform at -15°C

    The Mastodon is a game changer for the Fat Bike market. Engineered for and tested to work in the extreme cold as well as the warm. Strong and stiff 34 mm chassis developed from the Manitou Mattoc provides class leading damping, adjustability and now cold weather performance.

    The MC2 damper and Dorado Air spring system are proven performers with amazing external adjustability and internal tunability.

    Available from Shockcraft or via your local bike shop

    Learn More
  10. Mastodon Comp (Manitou)

    $999.00

    Order Now

    26-27" 80-140mm Manitou Mastodon Comp Fat Fork
    15 x 150 mm Hexlock SL axle
    Expert Air spring system
    IVA air volume spacer system
    ABS+ Damper with LSC and rebound adjustable
    1.5" Taper Steerer (Optional 1 1/8" aluminium steerer)
    Standard or Extended height (+20mm) available
    180 mm Disc Brake Mounts (Post)
    Tested to perform at -15°C

    The Mastodon is a game changer for the Fat Bike market. Engineered for and tested to work in the extreme cold as well as the warm. Strong and stiff 34 mm chassis developed from the Manitou Mattoc Comp provides class leading damping, adjustability and now cold weather performance.

    The ABS+ damper is a proven performer with external adjustability and internal tunability.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  11. 27" (27.5" 650B) 100-120 mm Manitou Machete Pro
    15 x 100 mm Hexlock SL axle
    ISO Air spring with negative coil
    ABS+ fully tuneable compression damper
    1.5" tapered steerer only

    The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  12. 29" 100-120 mm Manitou Machete Pro
    15 x 100 mm Hexlock SL axle
    ISO Air spring with negative coil
    ABS+ fully tuneable compression damper
    1.5" tapered steerer only

    The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  13. 27" (27.5" 650B) 100-120 mm Manitou Machete Comp
    9 x 100 mm QR axle
    TS Air spring with negative coil
    Kwik Toggle 2 Position On/Off Damper
    1 1/8" straight or 1.5" tapered steerer options

    The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  14. 29" 100-120 mm Manitou Machete Comp
    9 x 100 mm QR axle
    TS Air spring with negative coil
    Kwik Toggle 2 Position On/Off Damper
    1 1/8" straight or 1.5" tapered steerer options

    The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  15. 27+/29" 120-140 mm Manitou Machete forks
    15 x 110 mm Hexlock SL tooled axle (Boost)
    TS Air spring
    Kwik Toggle 2 Position On/Off Damper
    1.5" tapered steerer

    Machete is Manitou's answer to the call for a lightweight, cost-conscious performance Boost fork.  Incorporating the versatile Manitou Absolute+ compression damping, tried-and-true TPC rebound, Hexlock SL 15mm axle and patented Manitou hollow crown technology, a Machete is all you need to survive in the wild.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  16. 29+ 120-140 mm Manitou Machete forks
    15 x 110 mm Hexlock SL tooled axle (Boost)
    TS Air spring
    Kwik Toggle 2 Position On/Off Damper
    1.5" tapered steerer

    Machete is Manitou's answer to the call for a lightweight, cost-conscious performance Boost fork.  Incorporating the versatile Manitou Absolute+ compression damping, tried-and-true TPC rebound, Hexlock SL 15mm axle and patented Manitou hollow crown technology, a Machete is all you need to survive in the wild.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  17. 26" 100 mm Manitou Circus Pro forks
    Adjustable 80-100 mm internally with spacers
    15 x 100 mm Hexlock SL tooled axle
    Dorado Air spring tuned for jumping
    IVA Incremental Volume Air spacer system
    ABS+ damper with Jump Stack tune & hydraulic bottom out (HBO)
    1.5" tapered aluminium steerer

    The Circus Pro is Manitou's new Dirt Jump & Slope Style fork.  Based on the 34 mm Mattoc chassis it is strong, stiff and light, with a fully tunable air spring and ABS+ compression damper to take the impact out of hard landings.

    The 15 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  18. 26" 130 mm Manitou Circus Pro forks
    Adjustable 100-140 mm internally with spacers
    15 x 100 mm Hexlock SL tooled axle
    Dorado Air spring tuned for jumping
    IVA Incremental Volume Air spacer system
    ABS+ damper with Jump Stack tune & hydraulic bottom out (HBO)
    1.5" tapered aluminium steerer

    The Circus Pro is Manitou's new Dirt Jump & Slope Style fork.  Based on the 34 mm Mattoc chassis it is strong, stiff and light, with a fully tunable air spring and ABS+ compression damper to take the impact out of hard landings.

    The 15 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  19. 26" 130 mm Manitou Circus Expert forks. Adjustable 120-130mm internally with spacers
    20 x 110 mm Hex axle
    ACT coil spring with air preload system
    ABS+ damper with Jump Stack tune
    1.5" tapered or 1 1/8" aluminium steerer

    The Circus, Manitou's short and stout Jump fork, has a firm coil spring with air preload and a firm valved ABS+ compression damper to take the impact out of hard landings.

    The 20 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  20. Markhor (Manitou)

    $650.00

    Order Now

    26", 27", 27+/29" 100 mm Manitou Markhor
    QR 9 x 100 mm & 15 x 110 mm thru axle options
    TS Air spring with negative coil
    Kwik Toggle compression damper with lockout
    1 1/8" straight & 1.5" tapered steerer options

    Climb like a goat with the all-new Manitou Markhor lightweight XC fork. Markhor is available in 100 and 110 mm hub spacing and for 26", 27", 27+/29" wheel sizes. Markhor ranges from 80 to 120 mm travel, smoothing out any line the trail puts in front of you.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  21. 26" 203 mm Manitou Travis DC CID forks in grey 20 mm hex axle Coil spring Cartridge Intrinsic Damper (CID), air version Dual Crown 1 1/8" aluminium steerer Direct mount upper crown (integrated 45/70 mm stem for 31.8 mm handlebars) Made in USA New Old Stock (NOS) Manitou Part Number: 85-21772 Learn More
  22. 26" 203 mm Manitou Travis DC CID forks in grey 20 mm hex axle Coil spring Cartridge Intrinsic Damper (CID), air version Dual Crown 1 1/8" aluminium steerer Low height upper crown Made in USA New Old Stock (NOS) Manitou Part Number: 85-21772 Learn More
    • Out of stock

  23. 26" 130 mm Manitou Minute MRD forks in blue QR 9 mm axle NOBLE air spring system ABS Platform Damper (note this is not ABS+) 1 1/8" aluminium steerer New Old Stock (NOS) Manitou Part Number: 85-21756 Learn More
  24. 26" 100 mm Manitou Minute Elite ABS forks in white 20 mm hex axle MARS air spring system ABS Platform Damper (note this is not ABS+) 1 1/8" steel steerer Made in USA New Old Stock (NOS) Manitou Part Number: 85-21740 Learn More
  25. 26" 100 mm Manitou R7 Pro forks
    9 x 100 mm QR
    TS air spring with coil negative
    TPC Lockout damper with lockout knob on crow
    1 1/8" aluminium steerer, 265 mm long (uncut)
    30 mm stanchions.
    No V brake bosses (NB)
    1580 g total weight

    The R7 was Manitou's light and strong XC fork, available with up to 100 mm of travel and a variety of dampers including the ABS+ tunable and revalvable compression damper.

    Learn More

Set Descending Direction

25 Item(s)