We are OPEN
Click here for updates on our current status.

 

Manitou Mara Pro

Manitou Mara Pro

Set Descending Direction

21 Item(s)

  1. Manitou Mara Pro Rear Shock - Metric Eyelet Trunnion

    US$705.14

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Metric trunnion version (trunnion top, eyelet bottom)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36852-A013 to 192-36852-A020

    Learn More
  2. Manitou Mara Pro Rear Shock - Metric Eyelet

    US$705.14

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Metric eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable.

    Manitou Part Codes: 192-36851-A021 to 192-36851-A026

    Learn More
  3. Manitou Mara Pro Rear Shock - Imperial Eyelet

    US$705.14

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Imperial eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36851-A015 to 192-36851-A017

    Learn More
  4. Mara Pro Piggyback Compression Assembly (Manitou)

    US$178.66

    Available on backorder

    Mara Pro Piggyback Compression Assembly (Manitou)
    Valve body assembly for replacement or tuning.
    Fits Manitou Mara Pro piggyback shocks.

    Manitou Part Code:  142-37512-K027 Learn More
  5. Special size Manitou Mara Pro Air shock with custom shock pin to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
    Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
    Product includes Shockcraft Deaktiv conversion lower pin and Manitou Mara Pro piggy back shock.
    Choose travel from 230 x 60 mm (stock Mara), 230 x 57.5 mm (stock trek ) to 230x65mm if you have clearance to do so.

    Resulting combination bolts straight in

    Learn More
  6. Book your demo of a new Manitou Mezzer fork and/or Manitou Mara Pro/Inline rear shock, with Hayes Dominion A4 front brake.
    Simply add this product to your cart and proceed through to checkout to book your demo and confirm your address details.  We will add you to the queue for demo and advise ETA.

    For our existing and trusted customers there is no fee for demo.
    For new customers the demo fee is refundable upon return of the demo fork, rear shock & brakes in good condition or can be used towards purchase of a new Manitou Mara, Mezzer or Hayes Dominion brakes.

    Fitment wise, the fork requires a tapered head-tube and boost front wheel.  The brake requires a 6 bolt disc hub (i.e. not Shimano centre-lock).  A 203 mm disc rotor and brake adapter are supplied.  For demo the Manitou Mara Pro is available as 210 mm i2i Length x 50 mm Stroke or 216 x mm i2i Length x 63 mm Stroke.  On purchase there is the option to add/remove spacers from the Maras to change the stroke.  For example, the 210 x 50 mm Mara Pro can be changed to a stroke of up to 55 mm.  Contact us for further details.

    Manitou Mezzer pricing, details and specifications are available here.
    Manitou Mara Pro pricing, details and specifications are available here.
    Manitou Mara Inline pricing, details and specifications are available here.
    Hayes Dominion A4 brake pricing, details and specifications are available here.

    Demo is only available to New Zealand customers.
    Contact us for availability in case demos are out with other customers.

    Terms & Conditions apply - see below.

    Learn More
  7. King air can to fit metric sized Manitou Mara Pro & Mara Inline rear shocks
    Large volume air can same as that which comes standard on the Mara Pro piggyback shocks
    Select your shock size for the appropriate air can Learn More
  8. Standard air can to fit metric sized Manitou Mara Pro & Mara Inline rear shocks
    Smaller volume air can same as that which comes standard on the Mara Inline
    Select your shock size for the appropriate air can Learn More
  9. Original Manitou decal to fit Mara Pro reservoir
    Black with grey & silver

    Decal measurement = 45 mm height x 70 mm width

    Manitou Part Code: 29-37596-G002 Learn More
  10. Original Manitou decal to fit Mara Pro reservoir
    Black with grey & silver

    Decal measurement = 33 mm height x 70 mm width

    Manitou Part Code: 29-37596-G001 Learn More
  11. Original Manitou decal to fit Mara king can
    Black with grey, silver & red (Manitou logo)

    Decal measurement = 76 mm height x 148 mm width

    Manitou Part Code: 29-37595-G003 Learn More
  12. Original Manitou decal to fit Mara king can
    Black with grey, silver & red (Manitou logo)

    Decal measurement = 56 mm height x 150 mm width

    Manitou Part Code: 29-37595-G001 Learn More
  13. Original Manitou decal to fit Mara standard can
    Black with grey, silver & red (Manitou logo)

    Decal measurement = 64 mm height x 135 mm width

    Manitou Part Code: 29-37594-G003 Learn More
  14. Original Manitou decal to fit Mara standard can
    Black with grey, silver & red (Manitou logo)

    Decal measurement = 57 mm height x 135 mm width

    Manitou Part Code: 29-37594-G002 Learn More
  15. Manitou Mcleod & Mara travel spacer kit
    Contains 5 mm aluminium anti-rattle spacers for 10 mm inline and 12 mm Pro shocks
    Contains 2.5 mm plastic spacers for 10 mm inline and 12 mm Pro shocks.

    Manitou Part Code:  142-37512-K042

    Learn More
  16. Air Can Volume Spacer Kit
    Fits all Manitou McLeod & Mara King Can (dual can) shocks.
    Each ring is 1.15cc volum reduction
    5 rings per kit.

    Part number: 142-37512-K039 Learn More
  17. SKF Flexible IFP for Manitou Mara Shocks
    For 24.3mm bore, 14mm tall.
    Fits Mara metric inline and Pro piggy back shocks
    Do not use on McLeod, insufficient internal space.

    Manitou Part Code:  142-37512-K025 Learn More
  18. Mara Pro Piggy Back Reservoir (short)
    70mm total length, 24.3mm ID
    Fits Manitou Mara Pro shocks.
    Can be used to increase frame clearance on some shocks

    Manitou Part Code:  142-37512-K026 Learn More
  19. Air can seals for Manitou Mara & McLeod rear shocks
    Fit single and dual (king) can
    Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring
    Manitou Part Code: 142-31535-K002

    Additional static seals for the outer layer of the dual (king) can are available here

    Learn More
  20. Replacement seals for Manitou Mara & McLeod rear shock dual air can
    This is a secondary kit with seals for outer sleeve only and does not include main air seals

    Manitou Part Code: 142-31535-K035 Learn More
  21. Tuning for Manitou Mara Pro rear shocks

    Send us your rear shock and we will custom tune it to your weight and riding style.

    Includes calculations, labour, consumables and fluids for rear shocks in good working condition
    Tuning of a new Mara Pro only requires the New Rear Shock & Reassemble option, not a service
    Excludes repairs & any additional repair parts.
    Excludes springs and pivot hardware.

    Learn More

Set Descending Direction

21 Item(s)