We are OPEN
Click here for updates on our current status.

 

Rear Shock Parts

Set Descending Direction

1-25 of 102

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 0.5 inch shaft Wiper Seal
    D type single lip
    NBR black rubber material

    Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-NBR Learn More
  2. Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for new fitment or repair
    Straight replacement for similar bushings from Fox, Trelleborg etc

    Note these have a tighter ID than Fox & IGUS
    They can be reamed to size after installation if they are too tight

    Learn More
  3. Fox Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for repair
    Straight replacement for genuine Fox flanged bushings provided the pin isn't worn

    If you have a worn pin causing a knock, then use the green versions which have a tighter ID

    Learn More
  4. 12 mm DU Bushing (Monocrome)

    US$4.11

    In stock

    Straight replacement for
    Manitou, X-Fusion & some RockShox
    Rear Shock Eyelets
    12 mm x 14 mm x 12 mm Learn More
  5. 12 mm IGUS Eyelet Bushing

    US$9.49

    In stock

    Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More
  6. ID: 12 mm, OD: 14 mm, W: 12.5 mm Manitou Part Code: 85-6105 Learn More
    • Out of stock

  7. Straight replacement for Manitou Wide (14 mm) Rear Shock Eyelets 12 mm x 14 mm x 14 mm Learn More
  8. Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing Learn More
  9. 2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks 

    Learn More
  10. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 21.8 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K003 Learn More
  11. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
    21.8 mm total width 8 mm bolt hole
    Two piece top-hat design
    Manitou Part Code: 142-27125-K003 Learn More
  12. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 22.2 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K005 Learn More
  13. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 30 mm total width 8 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27125-K024 Learn More
  14. Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm width to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
  15. Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks

    Learn More
  16. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 40 mm total width 8 mm bolt hole Three piece pin and collar design Manitou Part Code: 142-27125-K047 Learn More
  17. Manitou Part Code: 83-2222

    Fits Manitou Swinger and Radium.

    81 mm overall length, 43 mm ID. Learn More
  18. Air Can 38 mm S Type (Manitou)

    US$28.46

    In stock

    Manitou Part Code: 83-2699

    Fits Manitou Swinger and Radium.

    80 mm overall length, 40 mm ID. Learn More
  19. Air Can 50 mm S Type (Manitou)

    US$28.46

    In stock

    Manitou Part Code: 83-2702

    Fits Manitou Swinger and Radium.

    92 mm overall length, 40 mm ID. Learn More
  20. Air Can 56 mm (Manitou)

    US$28.46

    In stock

    Manitou Part Code: 83-2228

    Fits Manitou Swinger and Radium.

    99 mm overall length, 43 mm ID. Learn More
  21. Air Can 63 mm (Manitou)

    US$28.46

    In stock

    Manitou Part Code: 83-2229

    Fits Manitou Swinger and Radium.

    106 mm overall length, 42 mm ID. Learn More
  22. Air Can 70 mm (Manitou)

    US$28.46

    In stock

    Manitou Part Code: 83-2230

    Fits Manitou Swinger and Radium.

    110 mm overall length, 43 mm ID. Learn More
  23. SPV Volume Adjuster for 2006 Black fork.
    Requires thin 16mm socket to adjust.
    M26.5 x 1.0 mm thread.  24mm piston

    Manitou Part Code 85-5871 Learn More
  24. Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom fitted in our workshop to your shock's individual eyelet tolerances Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and standard IGUS bushing For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after receipt of shock Learn More
  25. Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible. Includes stainless steel pin with plastic collars and standard IGUS bushing Allow 7 days lead time after receipt of shock Learn More

Set Descending Direction

1-25 of 102

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5