We are OPEN
Click here for our current status and how we are affected by Covid-19 restrictions.

 

Rear Shock Seal Kits

Set Descending Direction

19 Item(s)

  1. 0.5 inch shaft Wiper Seal
    D type single lip
    NBR black rubber material

    Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-NBR Learn More
  2. 0.5 inch shaft Wiper Seal
    D type
    PU blue polyurethane material

    Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-PU



    Learn More
  3. Damper & Air Seal kit for Manitou Radium R, RL & LRS Air shocks from 2008-2015

    PDF showing contents of kit is available here Learn More
  4. Complete seal kit (air sleeve and damper) for Manitou radium rear shocks without lockout lever
    This version is for 40 mm ID air-cans, measuring 43 mm OD
    Kit contains air can seals, damper seals, rebound knob seals and rebound knob detent ball

    Learn More
  5. Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever
    This version is for 40 mm ID air-cans, measuring 43 mm OD
    Kit contains air can seals, damper seals, rebound knob seals & detent ball plus lockout lever seals & detent ball

    Learn More
  6. Complete seal kit (air sleeve and damper) for Manitou radium rear shocks
    This version is for 43 mm ID air-cans, measuring 46 mm OD
    Kit contains wiper seal, air-can quad ring, air can to cap oring, travel check oring damper shaft and cap seals, rebound knob seal and detent ball

    Learn More
  7. Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever
    This version is for 43 mm ID air-cans, measuring 46 mm OD
    Kit contains air can seals, damper seals, lockout lever seals and detent balls for rebound and lockout

    Learn More
  8. Complete seal kit (air sleeve and damper) for Manitou radium LRS rear shocks used on Merida bikes
    35 mm ID air-can, both SPV and remote lockout versions
    Kit contains wiper seal, air-can quad ring, air can to cap oring, travel check oring damper shaft and cap seals, rebound knob seal and detent ball

    Learn More
  9. Damper O-Ring kit for Manitou Swinger & Metel Coil shocks from 2004-2005
    Also fits later year shocks using the single or double adjusters
    Does not fit 14 mm shaft REVOX, ISX or Swingers with the concentric HSC/LSC dials

    PDF showing contents of kit is available here Learn More
  10. Mara & McLeod Air Can Seal Kit (Manitou)

    US$33.83

    Available on backorder

    Air can seals for Manitou Mara & McLeod rear shocks
    Fit single and dual (king) can
    Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring
    Manitou Part Code: 142-31535-K002

    Additional static seals for the outer layer of the dual (king) can are available here

    Learn More
  11. Replacement seals for Manitou Mara & McLeod rear shock dual air can
    This is a secondary kit with seals for outer sleeve only and does not include main air seals

    Manitou Part Code: 142-31535-K035 Learn More
  12. Complete rebuild seal kit for Manitou McLeod rear shocks Fits single-can and king-can (dual can) Manitou Part Code: 142-31535-K001 Learn More
  13. Replacement Internal Floating Piston (IFP) for Manitou McLeod rear shocks
    Red version from 2016 Fits all Manitou McLeod dampers
    Includes quad-ring seal (-116)
    Manitou Part Code: 126-29522

    Learn More
    • Out of stock

  14. 27.3 x 35 x 3.5/5 mm Wiper seal (Manitou)
    Fits Manitou Swinger Air, Radium, LRS, S-Type, etc rear shocks
    Also fits some DT, Kona and Lapierre branded rear shocks.

    Manitou P/N 83-2720

    Learn More
  15. 28 x 34 x 2/3.5 mm Wiper seal (Manitou)
    Fits Manitou McLeod rear shocks

    Manitou P/N 08-30019 Learn More
  16. Comprehensive service kit for Manitou Swinger & Metel Coil Shocks 2004-2005
    Also fits later years with 1/2" shafts, independent comp adjusters and tooled SPV volume adjusters
    Includes Shockcraft's seal kit with grease, oil & tools to make the job easier

    PDF showing contents of o-ring kit is available here

    Learn More
  17. Revox Coil Seal Kit (Manitou)

    US$24.32

    Available on backorder

    Revox coil shock (14 mm shaft) seal kit with bumper & glide ring Manitou Part Code: 142-27330 Learn More
  18. Revox coil shock seal kit including 14 mm bushing and wiper seal.
    New Old Stock (NOS)

    Manitou Part Code: 83-2881 Learn More
  19. Seal & bumper kit for Manitou Swinger coil rear shock with 1/2" shaft
    Fits 3-Way, 4-Way and 6-Way Swingers  Also Metel.

    Manitou Part Code: 83-2238

    Learn More
    • Out of stock

Set Descending Direction

19 Item(s)