Tuning & Upgrade

Set Descending Direction

1-25 of 38

Page:
  1. 1
  2. 2
  1. ABS+ Damper Kit (Manitou)

    $120.80

    Available on backorder

    ABS+ damper kit for Manitou 32mm forks from 2008 to current.
    Fully revalvable and tuneable compression damper assembly.
    Red piston is 28mm OD (excluding oring) and fits the majority of Minute, Marvel, Machete and Circus forks.
    Top cap threads M30x1mm
    Manitou Part Code: 141-26532-K002

    Learn More
  2. ABS+ Damper Kit with Jump Tune (Manitou)

    $120.80

    Available on backorder

    ABS+ damper kit for Manitou 32 mm jump forks
    Red piston is 28mm OD (excluding oring) and fits the majority of Minute, Marvel, Machete and Circus Expert forks.
    Jump tune features a lot of compression damping.
    Manitou Part Code: 141-26532-K007 Learn More
  3. ABS+ damper kit for for Minute Pro and other Manitou 32 mm forks Manitou Part Code: 141-26532-K013 Learn More
  4. ABS+ compression damper kit for Manitou R7 forks from 2006 & some Black forks.
    Fully tunable and revalvable.
    25mm green piston and M26.5x1.00mm cap threads.
    Manitou Part Code: 141-26532-K001

    Learn More
  5. Shims, balls & springs for DIY tuning of Manitou ABS+ compression dampers
    ABS+ tuning guide can be found here
    Manitou Part Code: 141-32511-K001

    Learn More
  6. New Old Stock (NOS) Manitou Part Number: 83-2287 Learn More
    • Out of stock

  7. Black MARS Firm 100 mm Ride Kit (Manitou)

    $40.27

    Available on backorder

    100 mm 26" Black/Skareb Ride Kit
    For MARS air/coil spring systems
    Firm Rate 150 lb/in (Stiffness)
    Spring 70.5 mm length, OD 22.5 mm

    Manitou Part Number: 85-4987

    Learn More
    • Out of stock

  8. 80 & 100 mm Circus Comp & Match Ride Kit For coil & ACT air/coil spring systems in forks with steel stanchions Medium Rate (red stripe) 67 lb/in (Stiffness) Spring 253 mm length, OD 28.5 mm Spring only Manitou Part Code: 141-26686-K002 Learn More
  9. 80 & 100 mm Circus & Match Ride Kit For coil & ACT air/coil spring systems in forks with steel stanchions Soft Rate (blue stripe) 57 lb/in (Stiffness) Spring 253 mm length, OD 28.5 mm Spring only Manitou Part Code: 141-26686-K001 Learn More
  10. Circus Expert, Minute & Drake Ride Kit
    For coil & ACT air/coil spring systems
    Firm Rate 72 lb/in (Stiffness)
    Spring 290 mm length, OD 27.6 mm
    No pedestal
    Manitou Part Number: 141-23998-K009 Learn More
  11. 130 mm Drake & Circus Ride Kit
    For coil & ACT air/coil spring systems in forks with aluminium stanchions
    Medium Rate 58 lb/in (Stiffness)
    Spring 250 mm length, OD 27.1 mm
    Includes pedestal
    Manitou Part Number: 141-23998-K006 Learn More
  12. 130 mm Drake & Circus Ride Kit
    For coil & ACT air/coil spring systems  in forks with aluminium stanchions
    Soft Rate 50 lb/in (Stiffness) Spring 250 mm length, OD 27 mm
    Includes pedestal
    Manitou Part Code: 141-23998-K003 Learn More
    • Out of stock

  13. 80-100 mm Minute Expert, Drake & Circus Expert Ride Kit
    For coil & ACT air/coil spring systems
    Soft Rate 63 lb/in (Stiffness)
    Spring 195 mm length, OD 27.2 mm
    Includes pedestal
    Manitou Part Code: 141-23998-K001 Learn More
  14. Dorado IRT (Infinite Rate Tune) upgrade assembly Fits all Manitou Dorado forks 2009 onwards Easy installation in place of lower leg air cap Includes instructions & pressure guide Manitou Part Code: 141-32668-K005 Learn More
  15. Dorado Pro Bleeder Caps Kit (Manitou)

    $218.53

    Available on backorder

    Trailside Relief press-button bleeder caps Fit all Dorado forks 2009 onwards Manitou Part Code: 141-32668-K006 Learn More
  16. Includes Dorado IRT kit, trail side relief bleeder caps & high performance wiper seals Manitou Part Code: 141-32409-K001 Learn More
  17. Kwik Toggle compression and rebound knob set Includes cable mount and spring to convert Kwik Toggle damper forks to remote operation Manitou Part Code: 141-33386-K001 Learn More
  18. Upgrade your Mattoc Expert to Mattoc Pro specification.
    Requires the Mattoc Pro rebound shaft assembly
    Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
    27" wheel size for up to 160 mm travel

    Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

    Learn More
  19. IRT: Infinite Rate Tune Adds a second individually tunable air chamber to the positive air side of Mattoc & Magnum forks Manitou Part Code: 141-32668-K003 Learn More
  20. IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression Manitou Part Code: 141-32668-K001 Learn More
  21. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More
  22. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More
  23. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More
  24. Remote lever, cable & shock mounted cable-stop to convert Manitou McLeod to remote compression adjustment Lever included is two position Manitou Part Code: 142-31535-K027 Learn More
  25. Spacer rings to reduce overall length and travel of Manitou Mcleod rear shocks Install in air can above top out bumper Four spacers will reduce a 190 x 50 mm McLeod to 185 x 45 mm to fit Giant etc Learn More

Set Descending Direction

1-25 of 38

Page:
  1. 1
  2. 2