Mattoc Upgrade Kits

Set Descending Direction

7 Item(s)

  1. Circus Pro IVA Long Upgrade Kit (Manitou)

    $95.81

    Available on backorder

    IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression Thread M31 x 0.8 mm Finer thread than the Mattoc/Magnum IVA upgrade kit Manitou Part Code: 141-35384-K004 Learn More
  2. Shockcraft modified High Flow piston (rebound & mid valve) for Pro level forks with cartridge rebound
    Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
    This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
    Blue aluminium with PTFE glide-ring 16 mm OD
    Part Code: 126-27209HF

    Exchange high flow pistons also available

    Learn More
  3. IRT: Infinite Rate Tune
    Adds a second air chamber for independent tuning of mid-end stroke.
    Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
    Manitou Part Code: 141-32668-K003 Learn More
  4. Manitou Mattoc IRT Upgrade Kit 2020+
    Adds a second air chamber for independent tuning of mid-end stroke.
    Compatible with 2020+ Mattoc Pro, can be fitted to Comp with a piston swap.
    Installs with a cassette tool and uses a flatter cap than earlier versions

    Manitou part code: 141-32668-K010

    Learn More
  5. Upgrade your Mattoc Expert to Mattoc Pro specification.
    Requires the Mattoc Pro rebound shaft assembly
    Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
    27" wheel size for up to 160 mm travel

    Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

    Learn More
  6. Travel spacers & hydraulic-bottom-out (HBO) cones to convert Manitou Mattoc Pro from 26" to 27" or vice versa Includes instructions Does not fit Mattoc Expert, which uses larger diameter bottom out cones Manitou Part Code: 141-30159-K010 Learn More
  7. IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression Manitou Part Code: 141-32668-K001 Learn More

Set Descending Direction

7 Item(s)