Tuning & Upgrade

Set Ascending Direction

1-25 of 43

Page:
  1. 1
  2. 2
  1. 80 mm R7 Pro Titanium Negative spring and bumper kit
    Fits R7 forks 2006 to 2018
    For TS air spring systems with negative coil spring
    Spring, Titanium, 100 mm length, Rate 17 lb/in (Stiffness), OD 25 mm
    Rubber bumper 50 mm long
    Note 80 and 100mm negative parts are the same size.  100mm spring is softer.

    Manitou Part Number: 83-2666

    Learn More
  2. 80 mm R7 Pro Negative spring and bumper kit
    Fits R7 forks 2006 to 2018
    For TS air spring systems with negative coil spring
    Spring 100 mm length, Rate 13 lb/in (Stiffness), OD 25 mm
    Rubber bumper 65 mm long
    Note 80 and 100mm negative parts are the same size.  100mm spring is softer.

    Manitou Part Number: 83-2665

    Learn More
  3. 100 mm R7 Pro Negative spring and bumper kit
    Fits R7 forks 2006 to 2018
    For TS air spring systems with negative coil spring
    Spring 100 mm length, Rate 16 lb/in (Stiffness), OD 25 mm
    Rubber bumper 65 mm long
    Note 80 and 100mm negative parts are the same size.  100mm spring is softer.

    Manitou Part Number: 83-2696

    Learn More
  4. Soft ride kit for Manitou Nixon forks with MARS air-coil spring system New Old Stock (NOS) Manitou Part Code: 83-2469 Learn More
  5. 130 & 140 mm Minute & Tower Pro Ride Kit For MARS air/coil spring systems Extra Firm Rate 60 lb/in (Stiffness) Spring 96 mm length, OD 28 mm Manitou Part Number: 141-25683-K004 Learn More
    • Out of stock

  6. 120 mm 29" Minute/Tower Pro Ride Kit For MARS air/coil spring systems Extra Firm Rate 106 lb/in (Stiffness) Spring 86 mm length, OD 28 mm Manitou Part Number: 141-26744-K003 Learn More
    • Out of stock

  7. 100 mm 29" Minute/Tower Pro Ride Kit For MARS air/coil spring systems Extra Firm Rate 106 lb/in (Stiffness) Spring 86 mm length, OD 28 mm Manitou Part Number: 141-26743-K003 Learn More
    • Out of stock

  8. 120 mm Minute & Tower Pro Ride Kit For MARS air/coil spring systems Extra Extra Firm Rate 120 lb/in (Stiffness) Spring 80 mm length, OD 28 mm Manitou Part Number: 141-26744-K004 Learn More
    • Out of stock

  9. 80 mm Minute & Tower Pro Ride Kit For MARS air/coil spring systems Extra Firm Rate 115 lb/in (Stiffness) Spring 81 mm length, OD 28 mm Manitou Part Code: 141-25690-K005 Learn More
  10. 120 mm 29" Minute/Tower Pro Ride Kit For MARS air/coil spring systems Medium Rate 85 lb/in (Stiffness) Spring 80 mm length, OD 27.8 mm Manitou Part Code: 141-26744-K001 Learn More
    • Out of stock

  11. MILO (Manitou Integrated Lock Out) lever kit for rear shock or repair
    Kit includes 2 position handle-bar lever, cable & cable housing
    Manitou Part Code: 141-31975-K003

    Learn More
  12. MILO (Manitou Integrated Lock Out) kit for Kwik Toggle (KT) damper used in 2017+ forks
    Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, KT cap and screw
    Will adapt any Kwik Toggle fork damper to remote (handlebar) lockout operation
    Manitou Part Code: 141-33538

    Learn More
  13. MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
    Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
    Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
    Manitou Part Code: 141-26896

    Learn More
  14. Spacer rings to reduce overall length and travel of Manitou Mcleod rear shocks Install in air can above top out bumper Four spacers will reduce a 190 x 50 mm McLeod to 185 x 45 mm to fit Giant etc Learn More
  15. Remote lever, cable & shock mounted cable-stop to convert Manitou McLeod to remote compression adjustment Lever included is two position Manitou Part Code: 142-31535-K027 Learn More
  16. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More
  17. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More
  18. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More
  19. IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression Manitou Part Code: 141-32668-K001 Learn More
  20. Mattoc/Magnum IRT Upgrade Kit (Manitou)

    $153.31

    Available on backorder

    IRT: Infinite Rate Tune Adds a second individually tunable air chamber to the positive air side of Mattoc & Magnum forks Manitou Part Code: 141-32668-K003 Learn More
  21. Upgrade your Mattoc Expert to Mattoc Pro specification.
    Requires the Mattoc Pro rebound shaft assembly
    Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
    27" wheel size for up to 160 mm travel

    Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

    Learn More
  22. Kwik Toggle compression and rebound knob set Includes cable mount and spring to convert Kwik Toggle damper forks to remote operation Manitou Part Code: 141-33386-K001 Learn More
  23. Trailside Relief press-button bleeder caps Fit all Dorado forks 2009 onwards Manitou Part Code: 141-32668-K006 Learn More
  24. Manitou Racing Development (MRD) Upgrade kit.
    Fits Dorado 2009-2019
    Includes Dorado Infinite Rate Tune (IRT) air spring upgrade kit, Trail Side Relief bleeder caps
    & high performance MRD wiper seals

    Manitou Part Code: 141-32409-K001

    Learn More
  25. Firm ride kit for Dorado MRD 2004-05
    2x coil springs, 290 mm length, 32 mm OD
    Rate: Firm, 23.5 lb/in each

    Manitou Part Code: 85-5939 Learn More

Set Ascending Direction

1-25 of 43

Page:
  1. 1
  2. 2