Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 10 mm damper shafts
Manitou Part Code: 121-32318

note photo is of 12.7mm shaft version: 121-30396

Learn More

Air piston for Manitou 30mm forks. 
Including R7, M30 & Markhor
New design from 2020 using a quad-ring seal.

Manitou Part Code 141-33383-K001 Learn More

Air top cap for Manitou 32 mm forks 2007+
2003-2006 32mm forks used a different thread.
Works with ISO AIr, TS Air, MARS Air and ACT air coil systems
Includes schrader valve & air cap
M30 x 1 mm threads
Manitou Part Code: 141-23992-K002

This part is obselete, use 141-27988-K013

Learn More

Air top cap to fit Manitou Nixon 2005, Minute 2006 & Sherman 2005 forks
New-Old-Stock
1.125 x 18 TPI inperial threads
Includes schrader valve & cap

Manitou Part Code:  83-2449

Learn More

T-section seal & two backup rings
Fits 32mm fork air pistons with TS Air or ISO Air pistons.
Approx 28mm stanchion ID.

Manitou Part Code: 141-28131-K022

Learn More

Compression Rod for Machete Pro 27.5
Configurable for 80, 100 or 120 mm versions (Manitou)
To be used with ISO air piston (with rubber insert).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-30418-K023

Learn More

Compression Rod for Machete Pro 90
120 mm version (Manitou)
To be used with ISO air piston (with rubber insert).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-9088-K004 Learn More

Machete & Marvel ISO air piston
28.2 mm OD, 18 mm tall
M6 threaded puller hole on top
Orange anodised
Use with ISO compression rod (domed top) only
Manitou Part Code: 141-28131-K015
Replacement seal: 141-28131-K022

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Compression Rod for Minute Comp & Expert 26 Configurable for 120mm version To be used with TS air piston (with recess). Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt Manitou Part Code: 141-30658-K006 Learn More

Compression rod, spring & cap assembly for Manitou Minute TS Air
Designed for 26" 120 mm but can work with variety of other travel & wheel sizes using appropriate bottom-out bumpers
Includes foot bolt (M8 x 1.0 mm thread)

Manitou Part Code: 141-27988-K010 Learn More

Compression Rod for Minute Comp & Expert 26
Configurable for 130mm version To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-27988-K011 Learn More

Compression rod, spring & cap assembly for Manitou Minute TS Air
Designed for 26" 140mm, includes 10mm spacer for 130mm but can work with variety of other travel & wheel sizes using appropriate bottom-out bumpers.
300mm overall shaft length.  For 26" forks.
Includes negative coil spring, top-out bumper, bottom-out bumper, bumper support washer and M8x1mm foot bolt.

Manitou Part Code: 141-30658-K007

Learn More

Compression Rod for Minute Comp & Expert 26
Configurable for 120mm version
To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-27988-K009 Learn More

Compression Rod for Machete Comp 27
Configurable for 80-140mm versions (Manitou)
To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-30418-K022

Learn More

Compression Rod for Tower/Minute 29" 120mm
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-29090-K004 Learn More

Compression Rod for Minute Comp or Expert 29" forks Configurable for 130 and 140 mm versions To be used with TS air piston (with recess). Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt Manitou Part Code: 141-30643-K016 Learn More

Compression Rod for Machete Comp 29
Configurable for 80-140mm versions (Manitou)
To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-30418-K027

Learn More

Manitou 32mm TS air piston
28 mm OD.
13mm recess for TS Air shaft.
White plastic
New design uses a quad-ring seal.

Manitou part code: 141-33383-K002

Learn More

2007 Minute/Marvel Comp TS air piston
28 mm OD, 13.5 mm tall
13mm recess for TS Air shaft.
Gold or Blue anodised
Manitou part code: 83-3188
Replacement seal: 141-28131-K022

Learn More

Minute/Marvel/Machete TS air piston
28 mm OD, 16.5 mm tall
M6 threaded puller hole on top, 15mm recess underneath.
Gold anodised
Manitou part code: 141-27988-K012
Replacement seal: 141-28131-K022

Learn More

Valve-cap for Manitou 34 mm forks (Mattoc, Magnum & Mastodon) using IRT, TS or ISO air spring systems
Replacement part or upgrade for early forks using a conventional valve cap
Manitou Part Code: 127-31811

Learn More