You have no items in your shopping cart.
Available on backorder
ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011). Fully tunable and re-valvable to fit any rider weight or terrain.
Manitou Part Code: 141-26532-K006
In Stock
Mattoc/Magnum Pro MC2 compression damper HBO Cup
Spare part for repair or upgrading Mattoc Expert to Mattoc Pro damper
Pro HBO cup is smaller diameter than Expert version and must be used only with matching HBO cone.
Manitou Part Code: 126-30377
Learn MoreIn Stock
Mattoc/Magnum HBO check spring
Spare part for loss repair. Located behind HBO cup on compression assembly.
7mm long, 4.2mm OD.
Manitou Part Code: 06-30829
Learn MoreIn Stock
Mattoc/Magnum HBO knob detent spring
Spare part for loss repair. Located inside HBO knob on top of compression assembly.
3.8mm long, 2mm OD
Sold individually, 2 used in each knob.
Manitou Part Code: 06-29643
Learn MoreLast One Left
Rebound assembly for Manitou Mattoc Pro and Magnum Pro 27+/29"
Cartridge rebound tube with 16mm piston. Can be upgraded with High Flow piston.
Manitou Part Code: 141-30996-K025
Learn MoreFluid Flow compression damper assembly for Gold Label Forks
Will also fit Sherman, 2005/6 Nixon and 2006 Minute
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 27 mm
Cap threads 1.125" x 18 TPI
Manitou Part Code: 83-2808
Lockout compression damper assembly for Splice
Remote handlebar activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with cable as shown
Piston diameter approx 28 mm
Cap threads M28.5 x 1.0 mm
Manitou Part Code: 83-2406
Out of stock
Lockout compression damper assembly for Skareb
Remote handlebar activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with cable as shown
Piston diameter approx 24 mm
Cap threads M26.5 x 1.25 mm
Manitou Part Code: 83-2402
Fluid Flow compression damper assembly for R7 Forks
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 24 mm
Cap threads M26.5 x 1.0 mm
Manitou Part Code: 83-2647
Trelleborg foot seal for Manitou fork rebound shafts 2008 & later
Also used on air shafts on forks 2014 & later
11 mm ID, 17 mm OD, 2 mm W
Sold individually
Manitou Part Code: 141-23987
Available on backorder
Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006
Regular Price: US$166.93
Special Price US$83.47
Sherman SPV damper shaft assembly 170 mm
276 mm overall length, 213 mm steel tube, 27.3 mm piston
068159 End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5901
In Stock
Damper knob kit for Minute/Machete/Marvel Pro/Expert forks
Contains red compression knob, blue rebound knob, detent balls/springs and retaining screws
Manitou Part Code: 141-31938-K016
Available on backorder
Mattoc & Magnum Comp 29+ Rebound Damper Assy
For Comp level forks with ABS+ compression damper.
29mm piston.
Includes rebound damper, rebound knog and three pedestals for 80/100, 110 and 120mm configurations
Manitou Part Code: 141-32156-K004
Available on backorder
Rebound damper assembly for Mattoc Comp 27" forks with ABS+ compression damper & HBO
Includes rebound damper, rebound knob and 10 mm bottom-out spacer
Manitou Part Code: 141-32405-K003
Regular Price: US$245.23
Special Price US$122.61
Dorado MRD 2004-05 SPV damper shaft assembly
410 mm overall length, 275 mm steel tube, 27.5 mm piston
Aluminium End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5931
Available on backorder
Mattoc/Magnum/Mastodon Pro knob kit
For MC2 compression damper in Pro level forks
LSC, HSC and HBO knobs with detent balls/springs and fixing nut/screw
Manitou Part Code: 141-32155-K015
Last One Left
MILO (Manitou Integrated Lock Out) kit for Kwik Toggle (KT) damper used in 2017+ forks
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, KT cap and screw
Will adapt any Kwik Toggle fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-33538
Damper internal seal kit for Manitou EFC, SX, SX-Ti, FS & FS-Ti forks 1996 to 1997 including Palmer Stroker
Learn MoreAvailable on backorder
Mattoc/Magnum/Mastodon Pro MC2 compression damper assembly
Adjustable LSC, HSC and HBO
Comes with knobs, springs and detent balls as shown
Pro version has smaller diameter HBO cup than Expert version
Manitou Part Code: 141-30996-K001
Starting at: US$10.50
Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel
Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)
Learn MoreLast One Left
MILO (Manitou Integrated Lock Out) lever kit for rear shock or repair
Kit includes 2 position handle-bar lever, cable & cable housing
Manitou Part Code: 141-31975-K003
Fluid Flow compression damper assembly for Axel & Trace Forks
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 25 mm
Cap threads M26 x 1.0 mm
Manitou Part Code: 85-5253
Regular Price: US$28.99
Special Price US$12.04
South rebound damper assembly 60-75 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 25 mm diameter
End cap threads 28.5 x 1 mm
New Old Stock (NOS)
Manitou Part Code: 85-5319