12 mm Shock Hardware

7 Item(s)

per page

Set Descending Direction
  1. 2 Piece 12 mm Shock Hardware (Manitou)

    2 Piece 12 mm Shock Hardware (Manitou)

    $32.00

    2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks 

    Learn More
  2. Two sets of Offset Hardware (included IGUS pre-tensioned bushing not shown)

    Offset Shock Hardware (Shockcraft)

    $90.00

    Heavy duty offset stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit

    Custom made to fit your shock eyelet and frame

    This is shock hardware for one end of shock only

    Allow 7 days lead time after order confirmation

    Important: Check clearance between frame mounting tabs and shock body is sufficient to run offset hardware.  Also check suspension and tyre clearance throughout the stroke


    Learn More
  3. 3 Piece 12 mm Shock Hardware (Manitou)

    3 Piece 12 mm Shock Hardware (Manitou)

    $32.00

    Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks

    Learn More
  4. Fitted Sealed Straight Axle Shock Hardware (Shockcraft)

    Fitted Sealed Straight Axle Shock Hardware (Shockcraft)

    $95.00

    Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy

    Custom fitted in our workshop to your shock's individual eyelet tolerances

    Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and standard IGUS bushing

    For pin lengths 25 mm and greater both sealing collars and spacers are used

    Allow 7 days lead time after receipt of shock Learn More
  5. Fitted Straight Axle Shock Hardware (Shockcraft)

    Fitted Straight Axle Shock Hardware (Shockcraft)

    $85.00

    Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible.

    Includes stainless steel pin with plastic collars and standard IGUS bushing

    Allow 7 days lead time after receipt of shock Learn More
  6. Shock pin length ranges, shown from left: 21.9 mm fully sealed, 30-35 mm with seals & collars, >35 mm with seals & collars (all include pre-tensioned IGUS bushing)

    Self-Install Sealed Straight Axle Shock Hardware (Shockcraft)

    $85.00

    Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy

    Custom made to fit your shock eyelet and frame

    Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and pre-tensioned IGUS bushing for best fit

    For pin lengths 25 mm and greater both sealing collars and spacers are used

    Allow 7 days lead time after order confirmation Learn More
  7. All shock pin lengths available, examples shown from left: 21.9 mm, 31.5 mm, 39.5 mm (all include pre-tensioned IGUS bushing)

    Self-Install Straight Axle Shock Hardware (Shockcraft)

    $75.00

    Heavy duty stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit

    Custom made to fit your shock eyelet and frame

    Allow 7 days lead time after order confirmation Learn More

7 Item(s)

per page

Set Descending Direction