We're excited to announce the launch of Biken Distribution.
Biken has grown from all the brands and products at Shockcraft that aren't strictly suspension, and includes a special focus on quality kids' MTB products.  Visit Biken
 

Monocrome Products

Set Descending Direction

51-75 of 75

Page:
  1. 1
  2. 2
  3. 3
  1. Application: Shimano HT2 & Raceface X-Type Bottom Brackets ID: 24 mm, OD: 37 mm, W: 7 mm Available with Bearing Press Service & CNC Storm Drains Learn More
  2. Application: Monocrome Big Steel, Enduro, Trek BB90/95 & Hope Bottom Brackets. ID: 24 mm, OD: 37 mm, W: 7 mm Available with Bearing Press Service & CNC Storm Drains. Learn More
  3. Application: 1 1/8" 4545 Headsets 45 x 45 degree ACB ID: 30.5 mm, OD: 41.8 mm, W: 7.88 mm Features single rubber seal (1RS), rolled over outer race & recessed inner chamfer Exact replacement for Campy 4545 1 1/8" bearings Learn More
  4. Application: 1 1/8" 4545 Headsets 45 x 45 degree ACB ID: 30.1 mm, OD: 41.8 mm Two rubber seals (2RS) This will fit most Campy applications but has a slightly smaller ID than the Campy 4545 1 1/8" bearings Learn More
  5. Application: Stronglight ISIS Drive Bottom Brackets ID: 21.5 mm, OD: 31 mm, W: 14 mm Special Monocrome 6 Month Guarantee Learn More
  6. Application: Stronglight ISIS Drive Bottom Brackets ID: 21.5 mm, OD: 31 mm, W: 14 mm Learn More
  7. Application: ISIS Drive Bottom Brackets ID: 21.5 mm, OD: 31 mm, W: 7 mm Learn More
  8. Application: Wheel Hubs ID: 15 mm, OD: 26 mm, W: 7 mm Learn More
  9. Application: Square Taper Bottom Brackets ID: 16 mm, OD: 31 mm, W: 10 mm Learn More
  10. Application: Wheel Hubs ID: 17 mm, OD: 28 mm, W: 7 mm Learn More
  11. Application: Wheel Hubs ID: 18 mm, OD: 30 mm, W: 7 mm Learn More
  12. Application: BMX Euro Bottom Brackets to fit 3/4" Axle ID: 19.05 mm (3/4"), OD: 31 mm, W: 7 mm Learn More
  13. Application: BMX Spanish Bottom Brackets to fit 3/4" Axle ID: 19.05 mm (3/4"), OD: 37 mm, W: 9 mm Learn More
  14. Application: Santa Cruz Nomad Suspension Pivots ID: 21.5 mm, OD: 31 mm, W: 7 mm Special Monocrome 6 Month Guarantee Learn More
  15. Application: Shimano HT2 & Raceface X-Type Bottom Brackets
    ID: 24 mm, OD: 37 mm, W: 7 mm Learn More
  16. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  17. MTB External Bottom Bracket Pink - MCEBB001 (Monocrome)

    US$79.91

    Special batch colour - very limited quantities available

    Special custom coloured Pink MCEBB001 (limited numbers available)
    High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  18. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  19. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB SRAM/Truvativ GXP cranksets (24-22 mm)

    Available in red or gold (pewter no longer available)

    Learn More
  20. Replacement bearings and plastic caps for Monocrome Bottom Brackets Also fits BB90/95 & Hope External Bottom Brackets Learn More
  21. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with Road Shimano HT2 and FSA MegaExo cranksets (24 mm)

    Learn More
  22. Road External Bottom Bracket Pink - MCEBB101 (Monocrome)

    US$84.57

    Special batch colour - very limited quantities available

    Special custom coloured Pink MCEBB101 (limited numbers available)
    High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with Road Shimano HT2 and FSA MegaExo cranksets (24 mm)

    Learn More
  23. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with Road Shimano HT2 and FSA MegaExo cranksets (24 mm)

    Learn More
  24. Monocrome Screw-Fit 41 mm Bottom Bracket for replacement and upgrade of press-fit BB86 and BB92 bottom brackets.  Designed and engineered by Shockcraft to solve fitment, creaking and bearing life issues.

    Fits Shimano, RaceFace, FSA etc 24 mm crank spindles.
    Fits SRAM/Truvative GXP with optional "Engagement Ring" adapter set.
    FIts Mountain Bike frames with 92 mm BB Shell width (incl 89.5 mm with 2.5 mm spacer - purchase spacer separately here).
    Fits Road & Cyclocross frames with 86 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Optional extras (purchased separately):
    Installation tools - IceToolz 11D3 tool or Park BBT-18 tool
    2.5 mm spacer (for MTB frames with 89.5 mm shell width)

    Learn More
  25. Monocrome Screw-Fit 46 mm Bottom Bracket for replacement and upgrade of press-fit 30 mm (PF30) bottom brackets.  Designed and engineered by Shockcraft's engineer to solve fitment, creaking and bearing life issues.

    FIts Mountain Bike frames with 73 mm BB Shell width.
    Fits Road & Cyclocross frames with 68 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Learn More

Set Descending Direction

51-75 of 75

Page:
  1. 1
  2. 2
  3. 3