Ramp Control Upgrade Cartridge (MRP)

Availability: In stock

SKU:MRP-RAMP

The MRP Ramp Control Cartridge is a bolt in air spring modifier for selected Fox and RS forks. It divides the main air chamber into two and gives adjustable control over the flow between the two, providing more support at the twist of a dial.

$229.00

* Required Fields

$229.00
Description

Details

The MRP Ramp Control Cartridge is a bolt in air spring modifier for selected Fox and RS forks.  It divides the main air chamber into two and gives adjustable control over the flow between the two.  Providing more support at the twist of a dial.

Note this works via an adjustable blow-off between the chambers which requires full extension to reset.
If you require continual support the SD-DVC or Manitou IRT are the best solutions.

Luftkappe Compatilbility:
Not compatible with Luftkappe in 150-160 mm Pike due to not enough internal length.  Will work with <140 mm.
Not compatible with Luftkappe in 170-180 mm Lyrik/Yari due to not enough internal length.  Will work with larger wheel and shorter air shaft versions.
Contact us to confirm fitment if you are unsure.

Fork Compatibility:
RockShox 35 mm Model A

Fits 2013-2016 Pike forks with 15x100 axle spacing and 2010 and newer Boxxer World Cup (air-sprung) forks.  Solo air models only.  Recommended for 140mm+ 29”, 27.5+, 26” and  27.5” forks.

RockShox 35 mm Model B

Fits 2015 and newer Pike forks with "Boost" 15x110 axle spacing, all 2017 and newer Pike forks, and all 2015 and newer Lyrik and Yari forks (regardless of axle spacing).  Solo air models only.  Recommended for 140mm+ 29”, 27.5+, 26” and  27.5” forks.

RockShox 35 mm Model C (long body)

Fits 2013-2016 Pike forks with 15x100 axle spacing.  Solo air models only.  Recommended for 120 and 130mm 29” and 120mm 26” and 27.5” forks.

RockShox 35 mm Model D (long body)

Fits 2015 and newer Pike forks with “Boost” 15x110 axle spacing, all 2017 and newer Pike forks, and all 2015 and newer Lyrik and Yari forks (regardless of axle spacing).  Solo air models only.  Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks.

RockShox 32 mm Model E

Fits 2013 and newer Reba, Revelation, and SID forks and 2014 and newer Rock Shox Bluto forks.  Solo air models only.  Recommended for 100-140mm 29”, 27.5+, 27.5”, 26”, and Fat forks.

Fox 34 mm Version A
Fits 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers.  Recommended for 140-160mm 29”, 27.5+, and 27.5” forks.

Fox 34 mm Version B (long body)
Fits 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers.  Recommended for 110-130mm 29”, 27.5+, and 27.5” forks.

Fox 36 mm Version D
Fits 2015-2017 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers.  Recommended for 140-180mm 29”, 27.5+, and 27.5” forks.
This new model includes parts to convert the stock air-spring into an independent positive and negative chamber arrangement similar to the Fulfill™ spring found in MRP Ribbon and 2017 Stage forks.  Once installed, you can now vary the pressures in your two chambers; increasing your negative spring rate to improve small bump sensitivity (a common complaint with the stock spring).  This, in addition to the control you have over bottom-out and ending-stroke performance, gives you a radically more sophisticated air-spring that’s incredibly straightforward to tune and adjust.