WE ARE OPEN
Click here for updates on our current status.
 

Seals Individual

Set Descending Direction

18 Item(s)

  1. Quad-ring black nitrile rubber - sold individually.
    Appearance is matte black
    Standard compound for static and dynamic seals
    Measurements are internal diameter and cross section width. Learn More
  2. O-ring black nitrile rubber - sold individually.
    Appearance is matte black
    Standard compound for static and dynamic seals
    N90 code is a harder grade
    Measurements are internal diameter and cross section width.

    Learn More
  3. O-ring Polyurethane - sold individually.
    Appearance is clear to light brown
    Tougher than black nitrile rubber
    90 is a harder compound than 70
    Measurements are internal diameter and cross section width. Learn More
  4. 28 x 34 x 2/3.5 mm Wiper seal (Manitou)
    Fits Manitou McLeod rear shocks

    Manitou P/N 08-30019 Learn More
  5. 1.25" AN Wiper Seal

    Shockcraft Part Code:  S-FWI-1.25x1.522x1.07-AN Learn More
  6. Travel check o-rings for installation on fork stanchions or shock bodies below air can
    Black nitrile rubber
    Appearance is matte black

    Learn More
  7. IFP Pellet for Fox shocks using needle inflation system.
    6.5mm diameter.

    Shockcraft Part Code:  SC-IFP-PELLET-6.5 Learn More
  8. 5/8" H Type wiper seal - NBR Material
    Dual lip type, wipes both ways.

    Shockcraft Part Code: S-FWI-0.625x0.937x0.194-H-NBR

    Learn More
  9. 14 mm D Type Wiper Seal - PU

    US$6.80

    Available on backorder

    14 mm shaft Wiper Seal
    D type
    PU blue polyurethane material

    Shockcraft Part Code:  S-FWM-14x22x5-D-PU



    Learn More
  10. 1 1/8" x 1.339 x 0.107 AN Wiper
    Fits vintage Manitou 3,4 & EFC forks.
    Fits several X-fusion & Specialized air shocks. Learn More
  11. 0.5 inch shaft Wiper Seal
    D type
    PU blue polyurethane material

    Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-PU



    Learn More
  12. 0.5 inch shaft Wiper Seal
    D type single lip
    NBR black rubber material

    Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-NBR Learn More
  13. 1.062" AN Wiper Seal

    US$6.49

    In Stock

    AN 106 Wiper seal
    1 1/6" shaft size

    Shockcraft Part Code:  S-FWI-1.06x1.33x1.07-AN

    Learn More
  14. 0.812" AN Wiper Seal
    13/16" shaft size

    Shockcraft Part Code:  S-FWI-0.812x1.084x1.07-AN Learn More
  15. 0.5 IN H Type Wiper Seal - NBR

    US$10.21

    In Stock

    1/2" H Type wiper seal - NBR Material
    Dual lip type, wipes both ways.

    Shockcraft Part Code: S-FWI-0.5x0.912x0.194-H-NBR

    Learn More
  16. 0.375 IN H Type Wiper Seal - NBR

    US$15.65

    Available on backorder

    0.375 inch shaft wiper seal
    Fits Fox Vanilla coil shocks 1997-2004
    H type double acting
    NBR black rubber material

    Shockcraft Part Code: S-FWI-0.375x0.687x0.194-H-NBR

    Available with our comprehensive Rear Shock Service Kits for the Vanilla Coil Shocks 1997-2004 Learn More
  17. 27.3 x 35 x 3.5/5 mm Wiper seal (Manitou)
    Fits Manitou Swinger Air, Radium, LRS, S-Type, etc rear shocks
    Also fits some DT, Kona and Lapierre branded rear shocks.

    Manitou P/N 83-2720

    Learn More
  18. This single RockShox pick tool helps you to carefully remove O-rings during service.
    Pick tool is 140 mm length.
    Made from a non-scratch composite (fibreglass reinforced nylon) material.

    SRAM Part Code: 00.4318.012.013 (for a set of 5) Learn More

Set Descending Direction

18 Item(s)