You have no items in your shopping cart.
Manitou Shock Hardware
Shock hardware to fit Manitou rear shocks. Manitou shocks earlier than ~2011 use 12 mm shock hardware, modern (2011 onwards) Manitou shocks use 1/2" shock hardware.
Below listings Include Fox, X-Fusion and RockShox 1/2" hardware, which is compatible with modern Manitou rear shocks.
Below listings Include Fox, X-Fusion and RockShox 1/2" hardware, which is compatible with modern Manitou rear shocks.
-
2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Learn More
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks -
Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm width to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
-
Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Learn More
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks -
3 Piece Hardware 8 x 39.6 mm (Manitou)
US$18.87In Stock
3 Piece Hardware 8 x 39.6 mm (Manitou) Learn More -
-
LRS 2005/07 Heim Joint Kit (Manitou)
US$55.21In Stock
Replacement spherical bearings for Merida/Epic rear shocks OD 16 mm, ID 8 mm New Old Stock (NOS) Manitou Part Code: 83-2272 Learn More -
Shock pin and collars to fit 12 mm ID rear shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
38 mm total width
6 mm bolt hole
Two piece top-hat design
Photo indicative only
Manitou Part Code: 85-6205 Learn More -
Mounting Hardware Kit - 12.7 x 10 x 22.2 mm, 9 Piece (Fox)
US$40.05Available on backorder
Shock Hardware Kit - 10 x 22.2 mm (FOX)
10 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.
Ref 214-11-001 FTW 779690
Fox Part Code; 803-03-317
Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
10mm bolt hole
40mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4115.012.620 Learn MoreOut of stock
-
Mounting Hardware Kit - 12.7 x 10 x 60 mm (Fox)
US$38.13Last One Left
Shock Hardware Kit - 10 x 60 mm, 7 piece (FOX)
10 mm bolt hole, 60 mm total width
Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings
Fits almost all Fox rear shocks
Fits top end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19
Fox Part Code: 803-03-321 Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
6mm bolt hole
16mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4115.012.320 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.8 mm, 2 Piece (Manitou)
US$27.13Available on backorder
Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
21.8 mm total width
6 mm bolt hole
Two piece top-hat design
Manitou Part Code: 142-27124-K003 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.8 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU06218-101 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.85 mm, 5 Piece (Fox)
US$31.77Available on backorder
Shock Hardware Kit - 6 x 21.85 mm, 5 piece (FOX)
6 mm bolt hole, 0.86 inch (21.85mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-08-006 FTW RW160642
Fox Part Code; 803-03-143 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.85 mm, 9 Piece (Fox)
US$29.85In Stock
Shock Hardware Kit - 6 x 21.85 mm, 9 piece (FOX) 6 mm bolt hole, 0.86 inch (21.84mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-006 FTW 793134 Fox Part Code: 803-03-258 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 22.2 mm, 2 Piece (Manitou)
US$27.13Available on backorder
Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
22.2 mm total width
6 mm bolt hole
Two piece top-hat design
Manitou Part Code: 142-27124-K005 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 22.2 mm, 7 Piece (Fox)
US$29.49In Stock
Shock Hardware Kit - 6 x 22.2 mm, 7 piece (FOX)
6 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-08-007 FTW 1020988
Fox Part Code; 803-03-259 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 22.2 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU06222-101 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
US$31.77Available on backorder
Superseded Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
Shock Hardware Kit - 8 x 19 mm, 5 piece (FOX)
8 mm bolt hole, 0.75 inch (19.05mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-004 FTW 713329
Fox Part Code; 803-03-163 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
US$31.77Last One Left
Shock Hardware Kit - 8 x 19 mm, 5 piece (FOX)
8 mm bolt hole, 0.75 inch (0.19mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-004 FTW 824507
Fox Part Code; 803-03-277 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 20 mm, 5 Piece (Fox)
US$31.77Available on backorder
Shock Hardware Kit - 8 x 20 mm, 5 piece (FOX)
8 mm bolt hole, 0.787 inch (20 mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-043 FTW 169558
Fox Part Code; 803-03-236 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 20 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 20 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU08200-101 Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
8mm bolt hole
21.8mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4118.091.807 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 21.8 mm, 2 Piece (Manitou)
US$27.13In Stock
Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
21.8 mm total width 8 mm bolt hole
Two piece top-hat design
Manitou Part Code: 142-27125-K003 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 21.8 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU08218-101 Learn More
Shop By
Shopping Options
- Rear Shock Model
- Frame Brand
- Bolt Hole Diameter
- Length of Mounting Hardware
- Eyelet Internal Diameter
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
