You have no items in your shopping cart.
We have collected together a large range of shock hardware with various sizes and specifications. Use our Find Hardware by Size tool to find the right kit to fit your shock & bike.
If the size you need is not listed please contact us as we can check if it is available at one of our suppliers. If the size you need is not available "off-the shelf" or you want the best fit for your application we can make our custom Straight Axle Shock Hardware to fit.
Mountain Bike Shock eyelets come in a multitude of sizes and within each of those sizes a range of tolerances. To acheive the best performance and longest life our custom made Straight Axle Shock Hardware is designed, toleranced and selected by our mechanical engineer to work best in your application.
The basis for our custom Straight Axle Shock Hardware is a three piece system with a pin and two collars. This setup is stiffer, stronger and longer lasting than the typical two piece. Correctly toleranced, it also runs smooth and free without play. IGUS Pre-tensioned bushings are used in our self-install hardware for maximum performance and longevity. Options for specific applications include reamed fits, threaded bores, locking screws, o-ring and quad-ring seals and spherical ball mounts.
Shockcraft can build and supply all the components to rebuild the pivots in suspension linkages using bushings as well as bearings. We carry a large range of bearings, bushings and fasteners while manufacturing custom axles, pins and spacers. Contact us for more details.
In Stock Now
From: US$746.15
To: US$953.77
Cane Creek Kisuma Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
2018-2020 Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion pins, Cane Creek Kitsuma 230 x 57.5 mm coil shock and coil spring
Resulting combination bolts straight in
Custom made to order
Custom made to order
Custom made to order
Custom made to order
Please enquire
Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc
Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight
Out of stock
From: US$8.85
To: US$20.64
Loose flange adapter collars (pair) with standard size IGUS bushing and o-rings for repair of worn Fox flanged bushings.
One kit repairs one end of rear shock.
Custom made to order
Heavy duty offset stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit
Custom made to fit your shock eyelet and frame
This is shock hardware for one end of shock only
Allow 7 days lead time after order confirmation
Important: Check clearance between frame mounting tabs and shock body is sufficient to run offset hardware. Also check suspension and tyre clearance throughout the stroke
2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks
Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks
Available on backorder
Available on backorder
In Stock
Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.
Learn MoreIn Stock
Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. Available with shock eyelet pressing or complete custom fitted shock hardware.
Learn MoreAvailable on backorder
Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
1/2" ID x 1/2" Wide.
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware
In Stock
In Stock
In Stock
In Stock
In Stock