We have collected together a large range of shock hardware with various sizes and specifications. Use our Find Hardware by Size tool to find the right kit to fit your shock & bike.
If the size you need is not listed please contact us as we can check if it is available at one of our suppliers. If the size you need is not available "off-the shelf" or you want the best fit for your application we can make our custom Straight Axle Shock Hardware to fit.
Custom Fit or Offset
Mountain Bike Shock eyelets come in a multitude of sizes and within each of those sizes a range of tolerances. To acheive the best performance and longest life our custom made Straight Axle Shock Hardware is designed, toleranced and selected by our mechanical engineer to work best in your application.
The basis for our custom Straight Axle Shock Hardware is a three piece system with a pin and two collars. This setup is stiffer, stronger and longer lasting than the typical two piece. Correctly toleranced, it also runs smooth and free without play. IGUS Pre-tensioned bushings are used in our self-install hardware for maximum performance and longevity. Options for specific applications include reamed fits, threaded bores, locking screws, o-ring and quad-ring seals and spherical ball mounts.
Suspension Pivot Hardware
Shockcraft can build and supply all the components to rebuild the pivots in suspension linkages using bushings as well as bearings. We carry a large range of bearings, bushings and fasteners while manufacturing custom axles, pins and spacers. Contact us for more details.
Hard wearing, self lubricating and low maintenance flanged IGUS bushings
Various sizes available - select required dimensions
Bushings sold individually Learn More
6 mm bolt hole, 0.874 inch (22.2mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-007 FTW 1020988
8 mm bolt hole, 1.18 inch (30mm) total width Contains one pair of flanged polymer bushings, aluminim pin, four collars and o-rings. Fits almost all Fox rear shocks. Ref 214-09-018 FTW 778625
6 mm bolt hole, 0.86 inch (21.85mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-006 FTW RW160642
8 mm bolt hole, 0.75 inch (19.05mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-09-004 FTW 713329
8 mm bolt hole, 0.86 inch (21.85mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-09-066 FTW 747764
8 mm bolt hole, 25mm total width Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings. Fits almost all Fox rear shocks.
10 mm bolt hole, 60 mm total width Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings Fits almost all Fox rear shocks Fits top end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19
Shock pin and collars to fit 12 mm ID rear shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks) 38 mm total width 6 mm bolt hole Two piece top-hat design Photo indicative only
8 mm bolt hole, 1.960 inch (49.8 mm) total width Offset collars Contains one pair of 1/2" flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks Fits lower end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19
Fits Full Floater non-thru shaft Trek Fuel EX 2017-19.
Top End Shock Hardware: 10 x 60 mm, 7 piece kit (Fox) 10 mm bolt hole, 60 mm total width Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings Fits almost all Fox rear shocks
Lower End Shock Hardware: 8 x 49.8 mm, 5 piece kit (Fox) 8 mm bolt hole, 1.960 inch (49.8 mm) total width Offset collars Contains one pair of 1/2" flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks
Fox Part Code; 803-03-229 Fox Part Code: 803-03-321
Fox Flanged bushings (oversize) for shock eyelets Installed as a pair with o-rings (not included) for repair Thinner wall replacement for genuine Fox flanged bushings which are overly tight with oversize pin or undersize hole. Learn More