You have no items in your shopping cart.
Manitou Mattoc 3
Fork Details & Identification:
Brand |
Manitou |
Stanchions |
34 mm Black |
Model |
Mattoc Pro 3 |
Crown & Lowers |
Black or red |
Release Year/s |
2017/18 |
Decals |
Medium Manitou graphic with M on other leg & Lower triangles Stealth grey options |
Damper |
Manitou MC2 with adjustable HSC, LSC, HBO and LSR |
Wheel Size |
27" non boost 27" Boost (not plus) 27+ and 29+ Boost |
Spring |
Dorado air spring with self balancing positive and negative chambers IRT dual positive chamber factory fitted |
Configurations & Maximum Travel |
Non-boost 27" 160 mm Boost 27 x 2.6" 170 mm Boost 27+/29" 140 mm (up to 3.4") Boost 29+ 120 mm (up to 3.4") |
Updates from Mattoc 2 |
New boost non-plus version for 27 x 2.6" wheels and 170 mm with bolt on mudguard IRT stock across the range New low friction 34 mm wiper seals with foam rings Expert discontinued |
Upgrade Compatibility |
All upgrades (except Boost-170 mm mudguard) are compatible with all prior versions Hexlock SL axle has 100 mm Std and 110 mm Boost versions Expert forks can be upgraded to Pro Spec |
Upgrades:
Make your Mattoc even better with these upgrades. Purchase either with a Shockcraft service or for DIY installation. Pricing is provided at links below.
| Expert to Pro Conversion |
Upgrade damper to convert a Mattoc Expert to Mattoc Pro specification |
High Flow Piston (Mattoc Pro only) |
These pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run |
Incremental Volume Adjust (IVA) |
A 5 position spacer system to tune positive air chamber volume and increase progression |
Sealing Upgrades Internal |
Internal seal upgrade to reduce bath oil migration. Included in Shockcraft Full Service. |
Wiper Seal Upgrade |
Low friction seals with foam rings for all Manitou 34 mm forks |
Fluids:
Stock |
Maxima 5 wt fork oil in damper - 75 mm oil height Pro, 77 mm Expert Motorex 5W40 Semibath lower leg - 7 cc per side Slickoleum - air piston & seals |
Shockcraft Recommended |
Motorex 2.5 wt fork oil or Hot Oil Pink damper oil Motorex Fully Synthetic or Supergliss lower leg bath oil Slickoleum - air piston & seals |
-
121-29113 Travel Spacer 10 mm thick 10 mm shaft (Manitou)
US$3.04In Stock
Travel spacer for Manitou forks
Learn More
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113 -
Travel spacer for Manitou forks
Learn More
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396 -
ABS+ & TPC Comp Knob Detent Ball (Manitou)
US$1.22In Stock Now
ABS+ & TPC compression knob detent ball
3.2mm diameter.
Sold individually.Manitou Part Code: 141-26930-K042
Learn More -
ABS+ & TPC Comp Knob Detent Spring (Manitou)
US$3.04In Stock
ABS+ & TPC compression knob detent spring
Spare part for loss repair. Located on top of compression assembly under knob.
Fits 3.5mm pocket
6.3mm long, 3mm OD
Sold individually, 2 used in each knob.Manitou Part Code: 141-26930-K041
Learn More -
Clamp Block Manitou Fork Single Crown (Shockcraft)
US$139.76Made to Order
Clamp block for servicing Manitou single crown fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 22.2 mm
Shockcraft Part Code: SC-CLAMP-MAN-SC-V1 Learn More -
Fork Bushing Burnishing (Shockcraft)
From: US$27.34
To: US$39.50
Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance. Cures issue of friction and stiction to improve small bump control. Also reduces break-in time of a new fork to zero.
Learn More
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.
Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks. Other sizes will have a slight delay as we manufacture tooling. -
Fork Oil 2.5 wt (Motorex)
US$9.36Motorex 2.5 wt fork oil - 15 cSt @ 40°C
Learn More
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles -
Fork Oil 4 wt (Motorex)
US$9.36Motorex 4 wt fork oil
Learn More
16 cSt @ 40°C
Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles -
Fork Oil Selection Charts
US$0.00Try our simple fork oil selection charts to find out which oil you need for your brand of fork, terrain, climate and riding. Learn More -
Fork Service Kit for Manitou 34 mm Forks
From: US$2.43
To: US$430.61
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe Learn More -
Fork Service Kit for Manitou Mastodon Comp 2018+ Forks
From: US$2.43
To: US$748.36
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou Mastodon Comp forks 2018+ Learn More -
Fork Service Kit for Manitou Mastodon Pro 2018+ Forks
From: US$3.04
To: US$2,410.24
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou Mastodon Pro forks 2018+. Learn More -
Fork Service Kit for Manitou Mattoc Comp 2018+ Forks
From: US$2.43
To: US$1,395.32
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou Mattoc/Magnum Comp forks 2018+
See Related Products for details on components of this service kit Learn More -
Fork Service Kit for Manitou Mattoc Expert 2014-18 Forks
From: US$2.43
To: US$2,703.04
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou Mattoc Expert forks 2014-18
See Related Products for details on components of this service kit Learn More -
Fork Service Kit for Manitou Mattoc Pro 2014-20 Forks
From: US$3.04
To: US$3,202.68
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou Mattoc Pro forks 2014-20
See Related Products for details on components of this service kit Learn More -
Fork Service Kit for Manitou R7 2006-18 Forks
From: US$0.00
To: US$2,268.76
Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe
Application is Manitou R7 Forks 2006-18 except for MRD
See Related Products for details on components of this service kit Learn More -
Fully Synthetic Fork Bushing Lubricant 250 to 1000 cc (Motorex)
As low as: US$14.04
Motorex Fully Synthetic lubricating oil for air pistons and suspension forks lower leg bushings.
Learn More
Manitou use this exact oil as Semi-Bath fork lubrication.
Specifications:
5W40 grade
88 cSt @ 40C
Pour Point <-50C
This is a slightly less awesome lubricant than Motorex Supergliss but works over a wider temperature range and is better in the cold. -
Hot Oil Pink 250 cc (Shockcraft)
US$14.04Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
Learn More
14 cSt @ 40°C -
Manitou 34 mm Fork Seal Kit Low Friction Flanged (OE)
US$41.93Discontinued.
Alternative product: 34 mm Fork Seal Kit Low Friction Flangeless (Manitou)
Learn More
Kit includes 2 high quality Trelleborg Flanged seals, 2 foam rings and Slickoleum grease.
Fits 34 mm stanchioned Manitou forks from 2006 to present.
Flanged type for 44mm pocket.
Special compound for low friction & extreme low temperature performance
These flanged seals have the same fork compatibility as the flangeless option.
Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals.
A seal press tool is not essential for installation of the flanged seals but it does make the job easier.
Manitou Part Code: 141-34000
Replaces Part Numbers 141-30996-K007 & 83-2969Out of stock
-
Manitou 34 mm Fork Seal Kit Low Friction Flangeless (Manitou)
US$47.70In Stock
Kit includes 2 high quality flangeless seals, 2 foam rings and Slickoleum grease.
Fits 34 mm stanchioned Manitou forks from 2006 to present.
Flanged type for 44mm pocket.
Special compound for low friction & extreme low temperature performance.
These flangeless seals have the same fork compatibility as the flanged option
Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
We recommend the use of a seal press tool for installation to keep flangeles seals straight and set depth correctly.
Manitou Part Code: 141-39022-K020
Replaces Part Numbers 141-34000, 141-30996-K007 & 83-2969 Learn More -
Manitou Mattoc 34 mm 2014-21 Service, Tuning & Upgrade Pricing
As low as: US$148.87
Full service pricing for Manitou Mattoc 1, 2 and 3
Includes labour, consumables and fluids
Excludes wiper seals, repairs & repair parts
Select special service, upgrade & tuning options to view pricing Learn More -
Manitou Mattoc Lower Leg & Air Spring Service & Upgrades
As low as: US$112.42
Lower leg & air spring service pricing for Manitou Mattoc 1, 2 and 3
Includes labour, consumables and fluids
Excludes wiper seals, repairs & repair parts
Select special service & upgrade options to view pricing Learn More -
Manitou Mattoc Pro Internal Seal Kit (Shockcraft)
US$32.36Built to Order
Application: Manitou Mattoc Pro, Mastodon Pro, Magnum Pro
Kit includes o-rings & quad rings for MC2 dampers & Dorado Air spring (with IRT), and a travel check o-ring
Does not include foot seals (available separately here for Mattoc/Mastodon/Magnum forks)
PDF showing contents of kit is available here Learn More -
Mattoc / Mastodon / Magnum Air Piston Kit (Manitou)
US$59.85In Stock
31 mm Pro and Expert piston assembly with seal and Slickoleum assembly grease
Learn More
Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
Manitou Part Code: 141-30996-K023 -
Mattoc 26" Decal Kit (Manitou)
US$18.23Last One Left
Replacement decal stickers for Mattoc 26" forks Manitou Part Code: 141-30996-K020 Learn More
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
