You have no items in your shopping cart.
In Stock
From: US$27.34
To: US$39.50
Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance. Cures issue of friction and stiction to improve small bump control. Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.
Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks. Other sizes will have a slight delay as we manufacture tooling.
From: US$115.45
To: US$328.13
Permanent repair of creaking and ticking noises from fork crowns. Also improves fork stiffness. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for safe and permanent creak repair.
Note that damaged crowns will be rejected. This is not a repair for parts stretched or bent.
Pricing depends on whether we receive a stripped Crown Steerer Unit (CSU) only or a whole fork. If you send a whole fork we need to strip and rebuild it.sembly.
Forks with cartridge dampers (e.g. Fox FIT/GRIP/GRIP2/CTD, RockShox Charger, Manitou MC2 or Mezzer) require a minimum of a Lower Leg & Air Spring Service.
Forks with in-leg or open bath dampers (e.g. Fox open bath, RockShox all except Charger, Marzocchi Z2) require a minimum of a Standard Service. The service labour pricing provided excludes additional repair. Parts, oil and freight are additional and vary depending on the brand & model and the problems found.
Available immediately for RS Zeb, RS Yari/Lyrik 35 mm, RS Pike 35 mm, RS 32 mm Fox 38 mm, Fox 36 mm, Fox 34 mm, Fox 32 mm Manitou 37, 34, 32 and 30 mm, MRP Ribbon 35mm forks and more. New sizes have a slight delay as we design and manufacture tooling.
From: US$75.96
To: US$537.77
Replacement of individual Stanchion or Steerer Tubes in fork crowns. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.
Note that damaged crowns and tubes will be rejected.
Shockcraft Part Code: LBR-FORKTUBESWAP
Available Ex NZ Supplier 2 Days
Vorsprung Luftkappe air piston with higher volume negative
Fits 2014-2017 RockShox Pike & Lyrik forks
Fits 2018+ Lyrik & Yari
Fits 2018+ Rockshox Pike with an A2 Adapter.
Not compatible with Debonair V2 or V3 shafts.
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)
As low as: US$303.83
Matrix Tune for RockShox Pike/Lyrik 2014-22 Charger 1, 2 & 2.1 forks and dampers
Internal tuning (revalving) for the RockShox Pike/Lyrik Charger 1, 2 & 2.1 dampers matched to your weight, terrain, bike geometry and riding style, combined with our Unharsh Modifications, to give you more comfort, control, traction and speed
We use our Fortune Teller to take weight, terrain, bike geometry and riding style and select your Matrix Tune from a rack pre-prepared tunes
Rockeater Tune
We also have our Rockeater Tune for the Pike/Lyrik Charger 1, 2 & 2.1, info here
Pricing
Send in either your whole fork or damper only
Matrix Tune pricing includes labour for tuning & service (damper only or whole fork), modifications and consumables, with optional wiper seals (SKF or OE RockShox)
Excludes repairs & repair parts and optional upgrades
Optional Air Spring/Coil upgrades (DebonAir V2/V3 and Vorsprung Luftkappe, Smashpot & Secus) shown
Service Pricing only (i.e. without tuning/modifications) is here
Want to buy a new tuned damper to bolt-in?
You can also purchase a brand new Pike or Lyrik Charger damper with Matrix or Rockeater Tune to bolt into your fork, see Related Products
As low as: US$273.44
Rockeater Tune for RockShox Pike/Lyrik 2014-22 Charger 1, 2 & 2.1 forks and dampers
This is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory
The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed. But it's simpler. There are no calculations or data needed. Just send us either your fork or damper. We will service, install and dyno test to make sure it's running perfectly.
As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.
Matrix Tune
If you want the full experience of the Matrix Tune for the RockShox Pike/Lyrik Charger 1/2/2.1 we still do these too. Information and pricing for the Pike/Lyrik Charger 1/2/2.1 Matrix Tune is here.
Pricing
Send in either your whole fork or damper only
Rockeater Tune pricing includes labour for tuning & service (damper only or whole fork), modifications and consumables, with optional wiper seals (SKF or OE RockShox)
Excludes repairs, repair parts and optional upgrades
Optional Air Spring/Coil upgrades (DebonAir V2/V3 and Vorsprung Luftkappe, Smashpot & Secus) shown
Service Pricing only (i.e. without tuning/modifications) is here
Want to buy a new tuned damper to bolt-in?
You can also purchase a brand new Pike or Lyrik Charger damper with Matrix or Rockeater Tune to bolt into your fork, see Related Products
As low as: US$328.13
Rockeater Tune for RockShox Pike,Lyrik, Zeb & Boxxer 23+ Charger 3 forks and dampers
This is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory
Stock the Charger 3 has a preloaded base-valve which causes spikes and harshness on all sharp impacts. It also struggles on successive hits. This Rockeater Tune includes a new Shockcraft Engineered damper piston which solves all the compression and check flow issues.
As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.
Matrix Tune
Matrix tune isn't available for Charger 3 at this time.
Pricing
Send in either your whole fork or damper only
Rockeater Tune pricing includes labour for tuning & service (damper only or whole fork), modifications and consumables, with optional wiper seals (SKF or OE RockShox)
Excludes repairs, repair parts and optional upgrades
Optional Air Spring/Coil upgrades (DebonAir V2/V3 and Vorsprung Luftkappe, Smashpot & Secus) shown
Service Pricing only (i.e. without tuning/modifications) is here
Want to buy a new tuned damper to bolt-in?
You can also purchase a brand new Pike or Lyrik Charger damper with Matrix or Rockeater Tune to bolt into your fork, see Related Products
In Stock
Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
SRAM Part Code (for pack of 10): 11.4018.032.001
In Stock
In Stock
From: US$391.93
To: US$401.29
Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.