Vorsprung Luftkappe air piston with higher volume negative
Fits 2014-2017 RockShox Pike & Lyrik forks
Fits 2018+ Lyrik & Yari
Fits 2018+ Rockshox Pike with an A2 Adapter.
Not compatible with Debonair V2 or V3 shafts.
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
SRAM Part Code (for pack of 10): 11.4018.032.001

Learn More

These are only available for Pike, other applications have been superseded by the Debonair C1 (V3).

Superseded by SRAM-LYRIKPIKEDEBONAIR-AIRSHAFTUPV3

Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

These are available for self-install or can be installed as part of a Shockcraft service. Learn More

RockShox DebonAir V3 Seal Head Upgrade Kit (SRAM)

Contains a new seal-head and shaft foot to upgrade Debonair V2 (MY2019 or 2020)  to Debonair V3 (MY 2021)
This kit only works on Debonair 2 shafts, identified by a moulded plastic black or grey air piston (visible down the top of the stanchion).
It is not compatible with earlier Solo Air shafts or Debonair v1 (wich had a silver bolt visible in the top of the air piston).

Fits Pike, Revelation, Lyrik and Yari with Debonair V2 air shafts.

SRAM Part Code:  00.4020.573.000 Learn More

Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

Learn More

Self contained Lyrik/Yari Charger 2.1 RC2 damper for repair or upgrade of RockShox Lyrik B1+ & Yari A1+ 2016+ forks
Fits 35 mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
580 mm overall length
For up to 180 mm travel
Includes adjuster knobs & foot bolt
Top cap threads 32 x 0.5 mm
Shipping dimensions:  75 x 75 x 630 mm
Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

SRAM Part Code: 00.4020.170.000

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

Learn More

Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More