COVID-19 UPDATE:
We are OPEN, shipping orders and servicing suspension & dropper posts.
Click here for the latest information on Shockcraft's services during Alert Level 2 in New Zealand for COVID-19.
 

Slideshow

Set Descending Direction

24 Item(s)

  1. High quality aluminium headset with cartridge bearings for standard 1 1/8" (1.125 inch) frames and forks Learn More
  2. Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm length to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
  3. Application: Monocrome, Raceface X-Type & FSA MegaExo Bottom Brackets ID: 25 mm, OD: 37 mm, W: 7 mm Stainless steel balls and races Available with Bearing Press Service & CNC Storm Drains Learn More
  4. Application: Campagnolo Ultra-Torque, some FSA MegaExo Road BB's, Shimano HT2 Bottom Brackets for Mountain and Road (including internal BB91-41, internal BB91-42, external HT2 and road HT2) ID: 25 mm, OD: 37 mm, W: 6 mm Bearing materials: stainless steel cage and ceramic balls Lubricant, factory fill with Shockcraft Lightning Grease. (Narrow version of 6805 Caged Bearing) Learn More
  5. Coloured stem cap available in 6 colours to fit bike with 1 1/8" steerer Learn More
  6. Corset for Fox FLOAT Rear Shocks (Vorsprung)

    Regular Price: US$121.43

    Special Price US$60.71

    Vorsprung Corset air sleeve with higher volume negative
    Fits Fox FLOAT and DHX Air rear shocks
    Requires grease and air chamber lubricant (Float Fluid or RWC APL) to install

    Learn More
  7. Shockcraft complete air seal kit to fit Fox FLOAT air shocks from 2000 onward This kit has been designed for a longer life Learn More
  8. CNC machined heart stem cap available in 6 colours to fit bike with 1 1/8" steerer Learn More
  9. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  10. 29+ 120-140 mm Manitou Machete forks
    15 x 110 mm Hexlock SL tooled axle (Boost)
    TS Air spring
    Kwik Toggle 2 Position On/Off Damper
    1.5" tapered steerer

    Machete is Manitou's answer to the call for a lightweight, cost-conscious performance Boost fork.  Incorporating the versatile Manitou Absolute+ compression damping, tried-and-true TPC rebound, Hexlock SL 15mm axle and patented Manitou hollow crown technology, a Machete is all you need to survive in the wild.

    Available direct from Shockcraft or via your local bike shop

    Learn More
  11. The Mara is Manitou's new piggy back heavy duty air shock
    Imperial eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36851-A001 to 192-36851-A004

    Learn More
  12. The Mara is Manitou's new piggy back heavy duty air shock
    Metric eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable.

    Manitou Part Codes: 192-36851-A005 to 192-36851-A012

    Learn More
  13. The Mara is Manitou's new piggy back heavy duty air shock
    Metric trunnion version (trunnion top, eyelet bottom)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36852-A001 to 192-36852-A010

    Learn More
  14. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  15. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  16. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB SRAM/Truvativ GXP cranksets (24-22 mm)

    Available in red or gold (pewter no longer available)

    Learn More
  17. Party Pack for Fork Service

    From: US$20.14

    To: US$162.25

    Get Super Smooth Suspension with Supergliss, Slickoleum & SKF Seals.  Our fork service party packs include the oils, grease and tools specially selected by Shockcraft to help make your forks run smoother.

    STEP 1: Buy fork service party pack & SKF seals (select your SKF kit/s here)
    STEP 2: Get together with your riding buddies & service forks
    STEP 3 (most important): Enjoy the ride!

    Motorex fork oils & lubricants are also available at a lower price in 1 & 4 litre refilled bottles

    Learn More
  18. Presta to Schrader valve adapter. CNC aluminium with o-ring seal. Learn More
  19. Road External Bottom Bracket Pink - MCEBB101 (Monocrome)

    US$77.49

    Special batch colour - very limited quantities available

    Special custom coloured Pink MCEBB101 (limited numbers available)
    High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel, stainless or ceramic hybrid bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with Road Shimano HT2 and FSA MegaExo cranksets (24 mm)

    Learn More
  20. Monocrome Screw-Fit 41 mm Bottom Bracket for replacement and upgrade of press-fit BB86 and BB92 bottom brackets.  Designed and engineered here at Shockcraft to solve fitment, creaking and bearing life issues.

    Fits Shimano, RaceFace, FSA etc 24 mm crank spindles.
    Fits SRAM/Truvative GXP with optional "Engagement Ring" adapter set.
    FIts Mountain Bike frames with 92 mm BB Shell width (incl 89.5 mm with 2.5 mm spacer - purchase spacer separately here).
    Fits Road & Cyclocross frames with 86 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Optional extras (purchased separately):
    Installation tools - IceToolz 11D3 tool or Park BBT-18 tool
    2.5 mm spacer (for MTB frames with 89.5 mm shell width)

    Learn More
  21. Monocrome Screw-Fit 46 mm Bottom Bracket for replacement and upgrade of press-fit 30 mm (PF30) bottom brackets.  Designed and engineered here at Shockcraft to solve fitment, creaking and bearing life issues.

    FIts Mountain Bike frames with 73 mm BB Shell width.
    Fits Road & Cyclocross frames with 68 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Learn More
  22. Seal Press Tool 32 & 34 mm (RWC)

    US$64.07

    Available on backorder

    Double ended tool for pressing wiper seals into 32 or 34 mm stanchioned forks Works with both flanged and flangeless wiper seals Designed & tested to work with SKF flangeless seals Keeps seals straight and sets depth flush with top of fork casting in one hit Prevents damage to seals and forks Manufactured by Real World Cycling (RWC) Learn More
  23. Seal Press Tool 35 & 36 mm (RWC)

    US$64.07

    Available on backorder

    Double ended tool for pressing wiper seals into 35 or 36 mm stanchioned forks Works with both flanged and flangeless wiper seals Designed & tested to work with SKF flangeless seals Keeps seals straight and sets depth flush with top of fork casting in one hit Prevents damage to seals and forks Manufactured by Real World Cycling (RWC) Learn More
  24. Tool for pressing wiper seals into 35 mm stanchioned forks Works with both flanged and flangeless wiper seals Designed & tested to work with SKF flangeless seals Keeps seals straight and sets depth flush with top of fork casting in one hit Prevents damage to seals and forks Manufactured by Real World Cycling (RWC) Learn More
    • Out of stock

Set Descending Direction

24 Item(s)